This patchset contains USB3 support for Allwinner H6 SoC (DWC3 with a custom PHY).
The first patch adds the PHY driver, and the second/third patch adds compatible to adapt DWC3 platform glue to Allwinner platform. The last two patches are DT changes. Icenowy Zheng (5): phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC dt-bindings: usb: add binding for the DWC3 controller on Allwinner SoC usb: dwc3: of-simple: Add compatible for Allwinner H6 platform arm64: allwinner: h6: add USB3 device nodes arm64: allwinner: h6: enable USB3 port on Pine H64 .../bindings/phy/sun50i-usb3-phy.txt | 24 +++ .../bindings/usb/allwinner,dwc3.txt | 39 ++++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 23 +++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++ drivers/phy/allwinner/Kconfig | 13 ++ drivers/phy/allwinner/Makefile | 1 + drivers/phy/allwinner/phy-sun50i-usb3.c | 195 ++++++++++++++++++ drivers/usb/dwc3/dwc3-of-simple.c | 1 + 8 files changed, 334 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt create mode 100644 Documentation/devicetree/bindings/usb/allwinner,dwc3.txt create mode 100644 drivers/phy/allwinner/phy-sun50i-usb3.c -- 2.17.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.