The USB 2.0 PHY on Allwinner H6 SoC is similar to older Allwinner SoCs, with some USB0 quirk like A83T and PHY index 1/2 missing.
Add support for it. Signed-off-by: Icenowy Zheng <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> --- No changes in v4. Changes in v3: - Added Chen-Yu's Review tag. drivers/phy/allwinner/phy-sun4i-usb.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index 881078ff73f6..ae16854a770a 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -115,6 +115,7 @@ enum sun4i_usb_phy_type { sun8i_r40_phy, sun8i_v3s_phy, sun50i_a64_phy, + sun50i_h6_phy, }; struct sun4i_usb_phy_cfg { @@ -295,7 +296,8 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } - if (data->cfg->type == sun8i_a83t_phy) { + if (data->cfg->type == sun8i_a83t_phy || + data->cfg->type == sun50i_h6_phy) { if (phy->index == 0) { val = readl(data->base + data->cfg->phyctl_offset); val |= PHY_CTL_VBUSVLDEXT; @@ -344,7 +346,8 @@ static int sun4i_usb_phy_exit(struct phy *_phy) struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); if (phy->index == 0) { - if (data->cfg->type == sun8i_a83t_phy) { + if (data->cfg->type == sun8i_a83t_phy || + data->cfg->type == sun50i_h6_phy) { void __iomem *phyctl = data->base + data->cfg->phyctl_offset; @@ -959,6 +962,17 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .phy0_dual_route = true, }; +static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { + .num_phys = 4, + .type = sun50i_h6_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .enable_pmu_unk1 = true, + .phy0_dual_route = true, + .missing_phys = BIT(1) | BIT(2), +}; + static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg }, @@ -972,6 +986,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg }, { .compatible = "allwinner,sun50i-a64-usb-phy", .data = &sun50i_a64_cfg}, + { .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg }, { }, }; MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); -- 2.18.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
