From: Vasily Khoruzhick <[email protected]>

The Pinebook has a headphone jack tied to the HP headphone output of
the SoC, and internal speakers connected to the LINEOUT of the SoC,
through a standalone amplifier.

This commit enables I2S, digital and analog parts of audio codec on
Pinebook, along with a device node for the external amplifier.

Signed-off-by: Vasily Khoruzhick <[email protected]>
[[email protected]: dropped headphone_amp; added headphone amp regulator supply;
                fixed speaker_amp node name and sound-name-prefix name]
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
 .../dts/allwinner/sun50i-a64-pinebook.dts     | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index ec537c529726..b6d0b926a2ff 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -74,6 +74,32 @@
                compatible = "mmc-pwrseq-simple";
                reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
        };
+
+       speaker_amp: audio-amplifier {
+               compatible = "simple-audio-amplifier";
+               /*
+                * TODO This is actually a fixed regulator controlled by
+                * the GPIO line on the PMIC. This should be corrected
+                * once GPIO support is added for this PMIC.
+                */
+               VCC-supply = <&reg_ldo_io0>;
+               enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+               sound-name-prefix = "Speaker Amp";
+       };
+
+};
+
+&codec {
+       hpvcc-supply = <&reg_eldo1>;
+       status = "okay";
+};
+
+&codec_analog {
+       status = "okay";
+};
+
+&dai {
+       status = "okay";
 };
 
 &ehci0 {
@@ -277,6 +303,29 @@
        vcc-hdmi-supply = <&reg_dldo1>;
 };
 
+&sound {
+       status = "okay";
+       simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+       simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+                                   "Microphone", "Internal Microphone Right",
+                                   "Headphone", "Headphone Jack",
+                                   "Speaker", "Internal Speaker";
+       simple-audio-card,routing =
+                       "Left DAC", "AIF1 Slot 0 Left",
+                       "Right DAC", "AIF1 Slot 0 Right",
+                       "Speaker Amp INL", "LINEOUT",
+                       "Speaker Amp INR", "LINEOUT",
+                       "Internal Speaker", "Speaker Amp OUTL",
+                       "Internal Speaker", "Speaker Amp OUTR",
+                       "Headphone Jack", "HP",
+                       "AIF1 Slot 0 Left ADC", "Left ADC",
+                       "AIF1 Slot 0 Right ADC", "Right ADC",
+                       "Internal Microphone Left", "MBIAS",
+                       "MIC1", "Internal Microphone Left",
+                       "Internal Microphone Right", "HBIAS",
+                       "MIC2", "Internal Microphone Right";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pb_pins>;
-- 
2.19.1

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to