On Sun, Mar 03, 2019 at 11:05:23PM +0530, Jagan Teki wrote:
> Loop N1 instruction delay for burst mode devices are computed
> based on horizontal sync and porch timing values.
>
> The current driver is using u16 type for computing this hsync_porch
> value, which would failed to fit within the u16 type for large sync
> and porch timings devices. This would result in hsync_porch overflow
> and eventually computed wrong instruction delay value.
>
> Example, timings, where it produces the overflow
> {
> .hdisplay = 1080,
> .hsync_start = 1080 + 408,
> .hsync_end = 1080 + 408 + 4,
> .htotal = 1080 + 408 + 4 + 38,
> }
>
> It reproduces the desired delay value 65487 but the correct working
> value should be 7.
>
> So, Fix it by computing hsync_porch value separately with u32 type.
>
> Fixes: 1c1a7aa3663c ("drm/sun4i: dsi: Add burst support")
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> Tested-by: Merlijn Wajer <merl...@wizzup.org>
> ---
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 6ff585055a07..465e7fc57899 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -457,8 +457,9 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi
> *dsi,
> u16 delay = 50 - 1;
>
> if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> - delay = (mode->htotal - mode->hdisplay) * 150;
> - delay /= (mode->clock / 1000) * 8;
> + u32 hsync_porch = (mode->htotal - mode->hdisplay);
> +
> + delay = ((hsync_porch * 150) / ((mode->clock / 1000) * 8));shouldn't we keep the multiplication by 150 in the u32 assignation? Otherwise, we could keep a u16 for the delay Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
