Loop N1 instruction delay for burst mode devices are computed
based on horizontal sync and porch timing values.
The current driver is using u16 type for computing this hsync_porch
value, which would failed to fit within the u16 type for large sync
and porch timings devices. This would result in hsync_porch overflow
and eventually computed wrong instruction delay value.
Example, timings, where it produces the overflow
{
.hdisplay = 1080,
.hsync_start = 1080 + 408,
.hsync_end = 1080 + 408 + 4,
.htotal = 1080 + 408 + 4 + 38,
}
It reproduces the desired delay value 65487 but the correct working
value should be 7.
So, Fix it by computing hsync_porch value separately with u32 type.
Fixes: 1c1a7aa3663c ("drm/sun4i: dsi: Add burst support")
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 6ff585055a07..bfa7e2b146df 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -457,8 +457,9 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
u16 delay = 50 - 1;
if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
- delay = (mode->htotal - mode->hdisplay) * 150;
- delay /= (mode->clock / 1000) * 8;
+ u32 hsync_porch = (mode->htotal - mode->hdisplay) * 150;
+
+ delay = (hsync_porch / ((mode->clock / 1000) * 8));
delay -= 50;
}
--
2.18.0.321.gffc6fa0e3
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20190512184128.13720-2-jagan%40amarulasolutions.com.
For more options, visit https://groups.google.com/d/optout.
