ICN6211 is MIPI-DSI/RGB converter bridge from chipone. It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format.
Add dt-bingings for it. Signed-off-by: Jagan Teki <[email protected]> --- .../display/bridge/chipone,icn6211.txt | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt new file mode 100644 index 000000000000..53a9848ef8b6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt @@ -0,0 +1,78 @@ +Chipone ICN6211 MIPI-DSI to RGB Converter Bridge + +ICN6211 is MIPI-DSI/RGB converter bridge from chipone. +It has a flexible configuration of MIPI DSI signal input +and produce RGB565, RGB666, RGB888 output format. + +Required properties for RGB: +- compatible: must be "chipone,icn6211" +- reg: the virtual channel number of a DSI peripheral +- reset-gpios: a GPIO phandle for the reset pin + +The device node can contain following 'port' child nodes, +according to the OF graph bindings defined in [1]: + 0: DSI Input, not required, if the bridge is DSI controlled + 1: RGB Output, mandatory + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; + enable-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* LCD-PWR-EN: PB7 */ + backlight = <&backlight>; + + port { + panel_out_bridge: endpoint { + remote-endpoint = <&bridge_out_panel>; + }; + }; + }; + +&dsi { + vcc-dsi-supply = <®_dcdc1>; /* VCC-DSI */ + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi_out: port@0 { + reg = <0>; + + dsi_out_bridge: endpoint { + remote-endpoint = <&bridge_out_dsi>; + }; + }; + }; + + bridge@0 { + compatible = "chipone,icn6211"; + reg = <0>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */ + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + bridge_in: port@0 { + reg = <0>; + + bridge_out_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + }; + }; + + bridge_out: port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; +}; -- 2.18.0.321.gffc6fa0e3 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190524104317.20287-2-jagan%40amarulasolutions.com. For more options, visit https://groups.google.com/d/optout.
