On 9/8/19 10:22 PM, Ondřej Jirman wrote: > Hello Samuel, > > On Mon, Aug 19, 2019 at 10:23:01PM -0500, Samuel Holland wrote: >> This series adds support for the "hardware message box" in sun8i, sun9i, >> and sun50i SoCs, used for communication with the ARISC management >> processor (the platform's equivalent of the ARM SCP). The end goal is to >> use the arm_scpi driver as a client, communicating with firmware running >> on the AR100 CPU, or to use the mailbox to forward NMIs that the >> firmware picks up from R_INTC. >> >> Unfortunately, the ARM SCPI client no longer works with this driver >> since it now exposes all 8 hardware FIFOs individually. The SCPI client >> could be made to work (and I posted proof-of-concept code to that effect >> with v1 of this series), but that is a low priority, as Linux does not >> directly use SCPI with the current firmware version; all SCPI use goes >> through ATF via PSCI. >> >> As requested in the comments to v3 of this patchset, a demo client is >> provided in the final patch. This demo goes along with a toy firmware >> which shows that the driver does indeed work for two-way communication >> on all channels. To build the firmware component, run: > > I've tried using this driver with mainline arm_scpi driver (which is probably > an expected future use, since crust provides SCPI interface).
If you've verified in some way that this driver works on A83T, I'd appreciate your Tested-by, so I can send a patch for the A83T device tree node. > The problem I've found is that arm_scpi expects message box to be > bi-directional, but this driver provides uni-directional interface. > > What do you think about making this driver provide bi-directional interface? > We could halve the number of channels to 4 and mandate TX/RX configuration > (from main CPU's PoV) as ABI. Funny you mention that. That's what I did originally for v1, but it got NAKed by Maxime, Andre, and Jassi: https://lkml.org/lkml/2018/2/28/125 https://lkml.org/lkml/2018/2/28/944 > Otherwise it's impossible to use it with the arm_scpi driver. > > Or do you have any other ideas? I guess arm_scpi can be fixed to add a > property that would make it possible to use single shmem with two > mailboxes, one for rx and one for tx, but making sun6i mailbox have > bi-directional interface sounds easier. Yes, you can use the existence of the mbox-names property to determine if the driver needs one mailbox or two, as I did in this driver: https://lkml.org/lkml/2019/3/1/789 I'll have a patch available soon that implements this for arm_scpi. Cheers, Samuel > regards, > o. > >> git clone https://github.com/crust-firmware/meta meta >> git clone -b mailbox-demo https://github.com/crust-firmware/crust >> meta/crust >> cd meta >> make >> >> That will by default produce a U-Boot + ATF + SCP firmware image in >> [meta/]build/pinebook/u-boot-sunxi-with-spl.bin. See the top-level >> README.md for more information, such as cross-compiler setup. >> >> I've now used this driver with three separate clients over the past two >> years, and they all work. If there are no remaining concerns with the >> driver, I'd like it to get merged. >> >> Even without the driver, the clock patches (1-2) can go in at any time. >> >> Changes from v3: >> - Rebased on sunxi-next >> - Added Rob's Reviewed-by for patch 3 >> - Fixed a crash when receiving a message on a disabled channel >> - Cleaned up some comments/formatting in the driver >> - Fixed #mbox-cells in sunxi-h3-h5.dtsi (patch 7) >> - Removed the irqchip example (no longer relevant to the fw design) >> - Added a demo/example client that uses the driver and a toy firmware >> >> Changes from v2: >> - Merge patches 1-3 >> - Add a comment in the code explaining the CLK_IS_CRITICAL usage >> - Add a patch to mark the AR100 clocks as critical >> - Use YAML for the device tree binding >> - Include a not-for-merge example usage of the mailbox >> >> Changes from v1: >> - Marked message box clocks as critical instead of hacks in the driver >> - 8 unidirectional channels instead of 4 bidirectional pairs >> - Use per-SoC compatible strings and an A31 fallback compatible >> - Dropped the mailbox framework patch >> - Include DT patches for SoCs that document the message box >> >> Samuel Holland (10): >> clk: sunxi-ng: Mark msgbox clocks as critical >> clk: sunxi-ng: Mark AR100 clocks as critical >> dt-bindings: mailbox: Add a sunxi message box binding >> mailbox: sunxi-msgbox: Add a new mailbox driver >> ARM: dts: sunxi: a80: Add msgbox node >> ARM: dts: sunxi: a83t: Add msgbox node >> ARM: dts: sunxi: h3/h5: Add msgbox node >> arm64: dts: allwinner: a64: Add msgbox node >> arm64: dts: allwinner: h6: Add msgbox node >> [DO NOT MERGE] drivers: firmware: msgbox demo >> >> .../mailbox/allwinner,sunxi-msgbox.yaml | 79 +++++ >> arch/arm/boot/dts/sun8i-a83t.dtsi | 10 + >> arch/arm/boot/dts/sun9i-a80.dtsi | 10 + >> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 + >> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 34 ++ >> arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 24 ++ >> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 + >> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 3 +- >> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 2 +- >> drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 3 +- >> drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 3 +- >> drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 3 +- >> drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 3 +- >> drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 3 +- >> drivers/clk/sunxi-ng/ccu-sun8i-r.c | 2 +- >> drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 3 +- >> drivers/firmware/Kconfig | 6 + >> drivers/firmware/Makefile | 1 + >> drivers/firmware/sunxi_msgbox_demo.c | 307 +++++++++++++++++ >> drivers/mailbox/Kconfig | 10 + >> drivers/mailbox/Makefile | 2 + >> drivers/mailbox/sunxi-msgbox.c | 323 ++++++++++++++++++ >> 22 files changed, 842 insertions(+), 9 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/mailbox/allwinner,sunxi-msgbox.yaml >> create mode 100644 drivers/firmware/sunxi_msgbox_demo.c >> create mode 100644 drivers/mailbox/sunxi-msgbox.c >> >> -- >> 2.21.0 >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-ker...@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/bb6eab9a-f9cc-81ca-5e8c-9fb867c61ec2%40sholland.org.