This series adds a fairly complete support for this e-book reader.
Missing parts are eink display driver and the touch panel driver.
Support for both is available out-of-tree for now at:
https://megous.com/git/linux/log/?h=pb-5.6
The rest of the board is supported by the mainline drivers.
Please take a look.
thank you and regards,
Ondrej Jirman
Ondrej Jirman (3):
dt-bindings: vendor-prefixes: Add prefix for PocketBook International
SA
dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3
ARM: dts: sun5i: Add PocketBook Touch Lux 3 support
.../devicetree/bindings/arm/sunxi.yaml | 5 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
.../dts/sun5i-a13-pocketbook-touch-lux-3.dts | 257 ++++++++++++++++++
4 files changed, 265 insertions(+)
create mode 100644 arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
--
2.25.1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20200223031614.515563-1-megous%40megous.com.
