Hi Sakari and thanks for the review!
On Thu 05 Nov 20, 10:45, Sakari Ailus wrote:
> On Fri, Oct 23, 2020 at 07:45:40PM +0200, Paul Kocialkowski wrote:
> > The A31 MIPI CSI-2 controller is a dedicated MIPI CSI-2 controller
> > found on Allwinner SoCs such as the A31 and V3/V3s.
> >
> > It is a standalone block, connected to the CSI controller on one side
> > and to the MIPI D-PHY block on the other. It has a dedicated address
> > space, interrupt line and clock.
> >
> > Currently, the MIPI CSI-2 controller is hard-tied to a specific CSI
> > controller (CSI0) but newer SoCs (such as the V5) may allow switching
> > MIPI CSI-2 controllers between CSI controllers.
> >
> > It is represented as a V4L2 subdev to the CSI controller and takes a
> > MIPI CSI-2 sensor as its own subdev, all using the fwnode graph and
> > media controller API.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkow...@bootlin.com>
> > ---
> > drivers/media/platform/sunxi/Kconfig | 1 +
> > drivers/media/platform/sunxi/Makefile | 1 +
> > .../platform/sunxi/sun6i-mipi-csi2/Kconfig | 11 +
> > .../platform/sunxi/sun6i-mipi-csi2/Makefile | 4 +
> > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 635 ++++++++++++++++++
> > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h | 116 ++++
> > 6 files changed, 768 insertions(+)
> > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
> > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
> > create mode 100644
> > drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
> > create mode 100644
> > drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
> >
> > diff --git a/drivers/media/platform/sunxi/Kconfig
> > b/drivers/media/platform/sunxi/Kconfig
> > index 7151cc249afa..9684e07454ad 100644
> > --- a/drivers/media/platform/sunxi/Kconfig
> > +++ b/drivers/media/platform/sunxi/Kconfig
> > @@ -2,3 +2,4 @@
> >
> > source "drivers/media/platform/sunxi/sun4i-csi/Kconfig"
> > source "drivers/media/platform/sunxi/sun6i-csi/Kconfig"
> > +source "drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig"
> > diff --git a/drivers/media/platform/sunxi/Makefile
> > b/drivers/media/platform/sunxi/Makefile
> > index fc537c9f5ca9..887a7cae8fca 100644
> > --- a/drivers/media/platform/sunxi/Makefile
> > +++ b/drivers/media/platform/sunxi/Makefile
> > @@ -2,5 +2,6 @@
> >
> > obj-y += sun4i-csi/
> > obj-y += sun6i-csi/
> > +obj-y += sun6i-mipi-csi2/
> > obj-y += sun8i-di/
> > obj-y += sun8i-rotate/
> > diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
> > b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
> > new file mode 100644
> > index 000000000000..7033bda483b4
> > --- /dev/null
> > +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
> > @@ -0,0 +1,11 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +config VIDEO_SUN6I_MIPI_CSI2
> > + tristate "Allwinner A31 MIPI CSI-2 Controller Driver"
> > + depends on VIDEO_V4L2 && COMMON_CLK
> > + depends on ARCH_SUNXI || COMPILE_TEST
> > + select MEDIA_CONTROLLER
> > + select VIDEO_V4L2_SUBDEV_API
> > + select REGMAP_MMIO
> > + select V4L2_FWNODE
> > + help
> > + Support for the Allwinner A31 MIPI CSI-2 Controller.
> > diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
> > b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
> > new file mode 100644
> > index 000000000000..14e4e03818b5
> > --- /dev/null
> > +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +sun6i-mipi-csi2-y += sun6i_mipi_csi2.o
> > +
> > +obj-$(CONFIG_VIDEO_SUN6I_MIPI_CSI2) += sun6i-mipi-csi2.o
> > diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
> > b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
> > new file mode 100644
> > index 000000000000..ce89c35f5b86
> > --- /dev/null
> > +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
> > @@ -0,0 +1,635 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2020 Bootlin
> > + * Author: Paul Kocialkowski <paul.kocialkow...@bootlin.com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/reset.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +
> > +#include "sun6i_mipi_csi2.h"
> > +
> > +#define MODULE_NAME "sun6i-mipi-csi2"
> > +
> > +/* Core */
> > +
> > +static irqreturn_t sun6i_mipi_csi2_isr(int irq, void *dev_id)
> > +{
> > + struct sun6i_mipi_csi2_dev *cdev = (struct sun6i_mipi_csi2_dev *)dev_id;
>
> Unnecessary casting from void *.
>
> > + struct regmap *regmap = cdev->regmap;
> > + u32 pending;
> > +
> > + WARN_ONCE(1, MODULE_NAME
> > + ": Unsolicited interrupt, an error likely occurred!\n");
> > +
> > + regmap_read(regmap, SUN6I_MIPI_CSI2_CH_INT_PD_REG, &pending);
> > + regmap_write(regmap, SUN6I_MIPI_CSI2_CH_INT_PD_REG, pending);
> > +
> > + /*
> > + * The interrupt can be used to catch transmission errors.
> > + * However, we currently lack plumbing for reporting that to the
> > + * A31 CSI controller driver.
> > + */
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int sun6i_mipi_csi2_s_power(struct v4l2_subdev *subdev, int on)
>
> Please use runtime PM instead.
>
> > +{
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > + struct sun6i_mipi_csi2_dev *cdev = sun6i_mipi_csi2_video_dev(video);
> > + int ret;
> > +
> > + if (!on) {
> > + clk_disable_unprepare(cdev->clk_mod);
> > + reset_control_assert(cdev->reset);
> > +
> > + return 0;
> > + }
> > +
> > + ret = clk_prepare_enable(cdev->clk_mod);
> > + if (ret) {
> > + dev_err(cdev->dev, "failed to enable module clock\n");
> > + return ret;
> > + }
> > +
> > + ret = reset_control_deassert(cdev->reset);
> > + if (ret) {
> > + dev_err(cdev->dev, "failed to deassert reset\n");
> > + goto error_clk;
> > + }
> > +
> > + return 0;
> > +
> > +error_clk:
> > + clk_disable_unprepare(cdev->clk_mod);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_subdev_core_ops sun6i_mipi_csi2_subdev_core_ops =
> > {
> > + .s_power = sun6i_mipi_csi2_s_power,
> > +};
> > +
> > +/* Video */
> > +
> > +static int sun6i_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
> > +{
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > + struct sun6i_mipi_csi2_dev *cdev = sun6i_mipi_csi2_video_dev(video);
> > + struct v4l2_subdev *remote_subdev = video->remote_subdev;
> > + struct v4l2_fwnode_bus_mipi_csi2 *bus_mipi_csi2 =
> > + &video->endpoint.bus.mipi_csi2;
> > + union phy_configure_opts dphy_opts = { 0 };
> > + struct phy_configure_opts_mipi_dphy *dphy_cfg = &dphy_opts.mipi_dphy;
> > + struct regmap *regmap = cdev->regmap;
> > + struct v4l2_ctrl *ctrl;
> > + unsigned int lanes_count;
> > + unsigned int bpp;
> > + unsigned long pixel_rate;
> > + u8 data_type = 0;
> > + u32 version = 0;
> > + /* Initialize to 0 to use both in disable label (ret != 0) and off. */
> > + int ret = 0;
> > +
> > + if (!remote_subdev)
> > + return -ENODEV;
> > +
> > + if (!on) {
> > + v4l2_subdev_call(remote_subdev, video, s_stream, 0);
> > +
> > +disable:
>
> I think this label would be nicer at the end of the function (so you'd have
> a goto here).
It looks like everyone hates the backwards goto, even when there are no bad
side-effects attached to it. I'll go for moving it to the end then :)
> > + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG,
> > + SUN6I_MIPI_CSI2_CTL_EN, 0);
> > +
> > + phy_power_off(cdev->dphy);
> > +
> > + return ret;
> > + }
> > +
> > + switch (video->mbus_code) {
> > + case MEDIA_BUS_FMT_SBGGR8_1X8:
> > + case MEDIA_BUS_FMT_SGBRG8_1X8:
> > + case MEDIA_BUS_FMT_SGRBG8_1X8:
> > + case MEDIA_BUS_FMT_SRGGB8_1X8:
> > + data_type = MIPI_CSI2_DATA_TYPE_RAW8;
> > + bpp = 8;
> > + break;
> > + case MEDIA_BUS_FMT_SBGGR10_1X10:
> > + case MEDIA_BUS_FMT_SGBRG10_1X10:
> > + case MEDIA_BUS_FMT_SGRBG10_1X10:
> > + case MEDIA_BUS_FMT_SRGGB10_1X10:
> > + data_type = MIPI_CSI2_DATA_TYPE_RAW10;
> > + bpp = 10;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + /* Sensor pixel rate */
> > +
> > + ctrl = v4l2_ctrl_find(remote_subdev->ctrl_handler, V4L2_CID_PIXEL_RATE);
> > + if (!ctrl) {
> > + dev_err(cdev->dev,
> > + "%s: no MIPI CSI-2 pixel rate from the sensor\n",
> > + __func__);
> > + return -ENODEV;
> > + }
> > +
> > + pixel_rate = (unsigned long)v4l2_ctrl_g_ctrl_int64(ctrl);
> > + if (!pixel_rate) {
> > + dev_err(cdev->dev,
> > + "%s: zero MIPI CSI-2 pixel rate from the sensor\n",
> > + __func__);
> > + return -ENODEV;
> > + }
> > +
> > + /* D-PHY configuration */
> > +
> > + lanes_count = bus_mipi_csi2->num_data_lanes;
> > + phy_mipi_dphy_get_default_config(pixel_rate, bpp, lanes_count,
> > + dphy_cfg);
> > +
> > +
> > + /*
> > + * Note that our hardware is using DDR, which is not taken in account by
> > + * phy_mipi_dphy_get_default_config when calculating hs_clk_rate from
> > + * the pixel rate, lanes count and bpp.
> > + *
> > + * The resulting clock rate is basically the symbol rate over the whole
> > + * link. The actual clock rate is calculated with division by two since
> > + * DDR samples both on rising and falling edges.
> > + */
> > +
> > + dev_dbg(cdev->dev, "A31 MIPI CSI-2 config:\n");
> > + dev_dbg(cdev->dev, "%ld pixels/s, %u bits/pixel, %lu Hz clock\n",
> > + pixel_rate, bpp, dphy_cfg->hs_clk_rate / 2);
> > +
> > + ret = 0;
> > + ret |= phy_reset(cdev->dphy);
> > + ret |= phy_set_mode_ext(cdev->dphy, PHY_MODE_MIPI_DPHY,
> > + PHY_MIPI_DPHY_SUBMODE_RX);
> > + ret |= phy_configure(cdev->dphy, &dphy_opts);
>
> Huh. Please don't do bitwise or operations on error codes.
>
> > +
> > + if (ret) {
> > + dev_err(cdev->dev, "failed to setup MIPI D-PHY\n");
> > + return ret;
> > + }
> > +
> > + ret = phy_power_on(cdev->dphy);
> > + if (ret) {
> > + dev_err(cdev->dev, "failed to power on MIPI D-PHY\n");
> > + return ret;
> > + }
> > +
> > + /* MIPI CSI-2 controller setup */
> > +
> > + /*
> > + * The enable flow in the Allwinner BSP is a bit different: the enable
> > + * and reset bits are set together before starting the CSI controller.
> > + *
> > + * In mainline we enable the CSI controller first (due to subdev logic).
> > + * One reliable way to make this work is to deassert reset, configure
> > + * registers and enable the controller when everything's ready.
> > + *
> > + * However, reading the version appears necessary for it to work
> > + * reliably. Replacing it with a delay doesn't do the trick.
> > + */
> > + regmap_write(regmap, SUN6I_MIPI_CSI2_CTL_REG,
> > + SUN6I_MIPI_CSI2_CTL_RESET_N |
> > + SUN6I_MIPI_CSI2_CTL_VERSION_EN |
> > + SUN6I_MIPI_CSI2_CTL_UNPK_EN);
> > +
> > + regmap_read(regmap, SUN6I_MIPI_CSI2_VERSION_REG, &version);
> > +
> > + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG,
> > + SUN6I_MIPI_CSI2_CTL_VERSION_EN, 0);
> > +
> > + dev_dbg(cdev->dev, "A31 MIPI CSI-2 version: %04x\n", version);
> > +
> > + regmap_write(regmap, SUN6I_MIPI_CSI2_CFG_REG,
> > + SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(1) |
> > + SUN6I_MIPI_CSI2_CFG_LANE_COUNT(lanes_count));
> > +
> > + regmap_write(regmap, SUN6I_MIPI_CSI2_VCDT_RX_REG,
> > + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(3, 3) |
> > + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(2, 2) |
> > + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(1, 1) |
> > + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(0, 0) |
> > + SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(0, data_type));
> > +
> > + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG,
> > + SUN6I_MIPI_CSI2_CTL_EN, SUN6I_MIPI_CSI2_CTL_EN);
> > +
> > + ret = v4l2_subdev_call(remote_subdev, video, s_stream, 1);
> > + if (ret)
> > + goto disable;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops sun6i_mipi_csi2_subdev_video_ops
> > = {
> > + .s_stream = sun6i_mipi_csi2_s_stream,
> > +};
> > +
> > +/* Pad */
> > +
> > +static int sun6i_mipi_csi2_enum_mbus_code(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config *config,
> > + struct v4l2_subdev_mbus_code_enum
> > *code_enum)
>
> You can easily get under 80 characters per line if you wrap after the
> function's return type.
>
> > +{
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > +
> > + if (!video->remote_subdev)
> > + return -ENODEV;
> > +
> > + /* Forward to the sensor. */
> > + code_enum->pad = video->remote_pad_index;
> > +
> > + return v4l2_subdev_call(video->remote_subdev, pad, enum_mbus_code,
> > + config, code_enum);
> > +}
> > +
> > +static int sun6i_mipi_csi2_get_fmt(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config *config,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > +
> > + if (!video->remote_subdev)
> > + return -ENODEV;
> > +
> > + /* Forward to the sensor. */
> > + format->pad = video->remote_pad_index;
> > +
> > + return v4l2_subdev_call(video->remote_subdev, pad, get_fmt, config,
> > + format);
>
> The entity this driver controls is independent of the upstream device in
> its configuratione, you should not try to propagate the configuration
> upstream in the pipeline.
>
> The same applies to other similar functions in the driver.
>
> > +}
> > +
> > +static int sun6i_mipi_csi2_set_fmt(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config *config,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > +
> > + if (!video->remote_subdev)
> > + return -ENODEV;
> > +
> > + /* Forward to the sensor. */
> > + format->pad = video->remote_pad_index;
> > +
> > + return v4l2_subdev_call(video->remote_subdev, pad, set_fmt, config,
> > + format);
> > +}
> > +
> > +static int sun6i_mipi_csi2_enum_frame_size(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config
> > *config,
> > + struct v4l2_subdev_frame_size_enum
> > *size_enum)
> > +{
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > +
> > + if (!video->remote_subdev)
> > + return -ENODEV;
> > +
> > + /* Forward to the sensor. */
> > + size_enum->pad = video->remote_pad_index;
> > +
> > + return v4l2_subdev_call(video->remote_subdev, pad, enum_frame_size,
> > + config, size_enum);
> > +}
> > +
> > +static int sun6i_mipi_csi2_enum_frame_interval(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config
> > *config,
> > + struct
> > v4l2_subdev_frame_interval_enum *interval_enum)
> > +{
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > +
> > + if (!video->remote_subdev)
> > + return -ENODEV;
> > +
> > + /* Forward to the sensor. */
> > + interval_enum->pad = video->remote_pad_index;
> > +
> > + return v4l2_subdev_call(video->remote_subdev, pad, enum_frame_interval,
> > + config, interval_enum);
> > +}
> > +
> > +static const struct v4l2_subdev_pad_ops sun6i_mipi_csi2_subdev_pad_ops = {
> > + .enum_mbus_code = sun6i_mipi_csi2_enum_mbus_code,
> > + .get_fmt = sun6i_mipi_csi2_get_fmt,
> > + .set_fmt = sun6i_mipi_csi2_set_fmt,
> > + .enum_frame_size = sun6i_mipi_csi2_enum_frame_size,
> > + .enum_frame_interval = sun6i_mipi_csi2_enum_frame_interval,
> > +};
> > +
> > +/* Subdev */
> > +
> > +static const struct v4l2_subdev_ops sun6i_mipi_csi2_subdev_ops = {
> > + .core = &sun6i_mipi_csi2_subdev_core_ops,
> > + .video = &sun6i_mipi_csi2_subdev_video_ops,
> > + .pad = &sun6i_mipi_csi2_subdev_pad_ops,
> > +};
> > +
> > +/* Notifier */
> > +
> > +static int sun6i_mipi_csi2_notifier_bound(struct v4l2_async_notifier
> > *notifier,
> > + struct v4l2_subdev *remote_subdev,
> > + struct v4l2_async_subdev
> > *remote_subdev_async)
> > +{
> > + struct v4l2_subdev *subdev = notifier->sd;
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > + struct sun6i_mipi_csi2_dev *cdev = sun6i_mipi_csi2_video_dev(video);
> > + int source_pad;
> > + int ret;
> > +
> > + source_pad = media_entity_get_fwnode_pad(&remote_subdev->entity,
> > + remote_subdev->fwnode,
> > + MEDIA_PAD_FL_SOURCE);
> > + if (source_pad < 0)
> > + return source_pad;
> > +
> > + ret = media_create_pad_link(&remote_subdev->entity, source_pad,
> > + &subdev->entity, 0,
> > + MEDIA_LNK_FL_ENABLED |
> > + MEDIA_LNK_FL_IMMUTABLE);
> > + if (ret) {
> > + dev_err(cdev->dev, "failed to create %s:%u -> %s:%u link\n",
> > + remote_subdev->entity.name, source_pad,
> > + subdev->entity.name, 0);
> > + return ret;
> > + }
> > +
> > + video->remote_subdev = remote_subdev;
> > + video->remote_pad_index = source_pad;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations
> > sun6i_mipi_csi2_notifier_ops = {
> > + .bound = sun6i_mipi_csi2_notifier_bound,
> > +};
> > +
> > +/* Media Entity */
> > +
> > +static int sun6i_mipi_csi2_link_validate(struct media_link *link)
> > +{
> > + struct v4l2_subdev *subdev =
> > + container_of(link->sink->entity, struct v4l2_subdev, entity);
> > + struct sun6i_mipi_csi2_video *video =
> > + sun6i_mipi_csi2_subdev_video(subdev);
> > + struct v4l2_subdev *remote_subdev;
> > + struct v4l2_subdev_format format = { 0 };
> > + int ret;
> > +
> > + if (!is_media_entity_v4l2_subdev(link->source->entity))
> > + return -EINVAL;
> > +
> > + remote_subdev = media_entity_to_v4l2_subdev(link->source->entity);
> > +
> > + format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + format.pad = link->source->index;
> > +
> > + ret = v4l2_subdev_call(remote_subdev, pad, get_fmt, NULL, &format);
> > + if (ret)
> > + return ret;
> > +
> > + video->mbus_code = format.format.code;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct media_entity_operations sun6i_mipi_csi2_entity_ops = {
> > + .link_validate = sun6i_mipi_csi2_link_validate,
> > +};
> > +
> > +/* Base Driver */
> > +
> > +static int sun6i_mipi_csi2_v4l2_setup(struct sun6i_mipi_csi2_dev *cdev)
> > +{
> > + struct sun6i_mipi_csi2_video *video = &cdev->video;
> > + struct v4l2_subdev *subdev = &video->subdev;
> > + struct v4l2_async_notifier *notifier = &video->notifier;
> > + struct fwnode_handle *handle;
> > + struct v4l2_fwnode_endpoint *endpoint;
> > + int ret;
> > +
> > + /* Subdev */
> > +
> > + v4l2_subdev_init(subdev, &sun6i_mipi_csi2_subdev_ops);
> > + subdev->dev = cdev->dev;
> > + strscpy(subdev->name, MODULE_NAME, sizeof(subdev->name));
> > + v4l2_set_subdevdata(subdev, cdev);
> > +
> > + /* Entity */
> > +
> > + subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> > + subdev->entity.ops = &sun6i_mipi_csi2_entity_ops;
>
> Why is there no device node? This driver appears to be MC-enabled.
Right, it looks like we need a subdev node here. I'll change that.
Paul
> > +
> > + /* Pads */
> > +
> > + video->pads[0].flags = MEDIA_PAD_FL_SINK;
> > + video->pads[1].flags = MEDIA_PAD_FL_SOURCE;
> > +
> > + ret = media_entity_pads_init(&subdev->entity, 2, video->pads);
> > + if (ret)
> > + return ret;
> > +
> > + /* Endpoint */
> > +
> > + handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(cdev->dev), 0, 0,
> > + FWNODE_GRAPH_ENDPOINT_NEXT);
> > + if (!handle)
> > + goto error_media_entity;
> > +
> > + endpoint = &video->endpoint;
> > + endpoint->bus_type = V4L2_MBUS_CSI2_DPHY;
> > +
> > + ret = v4l2_fwnode_endpoint_parse(handle, endpoint);
> > + fwnode_handle_put(handle);
> > + if (ret)
> > + goto error_media_entity;
> > +
> > + /* Notifier */
> > +
> > + v4l2_async_notifier_init(notifier);
> > +
> > + ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle,
> > +
> > &video->subdev_async);
> > + if (ret)
> > + goto error_media_entity;
> > +
> > + video->notifier.ops = &sun6i_mipi_csi2_notifier_ops;
> > +
> > + ret = v4l2_async_subdev_notifier_register(subdev, notifier);
> > + if (ret < 0)
> > + goto error_notifier;
> > +
> > + /* Subdev */
> > +
> > + ret = v4l2_async_register_subdev(subdev);
> > + if (ret < 0)
> > + goto error_notifier_registered;
> > +
> > + return 0;
> > +
> > +error_notifier_registered:
> > + v4l2_async_notifier_unregister(notifier);
> > +error_notifier:
> > + v4l2_async_notifier_cleanup(notifier);
> > +error_media_entity:
> > + media_entity_cleanup(&subdev->entity);
> > +
> > + return ret;
> > +}
> > +
> > +static int sun6i_mipi_csi2_v4l2_teardown(struct sun6i_mipi_csi2_dev *cdev)
> > +{
> > + struct sun6i_mipi_csi2_video *video = &cdev->video;
> > + struct v4l2_subdev *subdev = &video->subdev;
> > + struct v4l2_async_notifier *notifier = &video->notifier;
> > +
> > + v4l2_async_unregister_subdev(subdev);
> > + v4l2_async_notifier_unregister(notifier);
> > + v4l2_async_notifier_cleanup(notifier);
> > + media_entity_cleanup(&subdev->entity);
> > + v4l2_device_unregister_subdev(subdev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct regmap_config sun6i_mipi_csi2_regmap_config = {
> > + .reg_bits = 32,
> > + .reg_stride = 4,
> > + .val_bits = 32,
> > + .max_register = 0x400,
> > +};
> > +
> > +static int sun6i_mipi_csi2_resource_request(struct sun6i_mipi_csi2_dev
> > *cdev,
> > + struct platform_device *pdev)
> > +{
> > + struct resource *res;
> > + void __iomem *io_base;
> > + int irq;
> > + int ret;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + io_base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(io_base))
> > + return PTR_ERR(io_base);
> > +
> > + cdev->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "bus", io_base,
> > +
> > &sun6i_mipi_csi2_regmap_config);
> > + if (IS_ERR(cdev->regmap)) {
> > + dev_err(&pdev->dev, "failed to init register map\n");
> > + return PTR_ERR(cdev->regmap);
> > + }
> > +
> > + cdev->clk_mod = devm_clk_get(&pdev->dev, "mod");
> > + if (IS_ERR(cdev->clk_mod)) {
> > + dev_err(&pdev->dev, "failed to acquire csi clock\n");
> > + return PTR_ERR(cdev->clk_mod);
> > + }
> > +
> > + cdev->reset = devm_reset_control_get_shared(&pdev->dev, NULL);
> > + if (IS_ERR(cdev->reset)) {
> > + dev_err(&pdev->dev, "failed to get reset controller\n");
> > + return PTR_ERR(cdev->reset);
> > + }
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0)
> > + return -ENXIO;
> > +
> > + ret = devm_request_irq(&pdev->dev, irq, sun6i_mipi_csi2_isr, 0,
> > + MODULE_NAME, cdev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to request MIPI CSI-2 IRQ\n");
> > + return ret;
> > + }
> > +
> > + cdev->dphy = devm_phy_get(&pdev->dev, "dphy");
> > + if (IS_ERR(cdev->dphy)) {
> > + dev_err(&pdev->dev, "failed to get the MIPI D-PHY\n");
> > + return PTR_ERR(cdev->dphy);
> > + }
> > +
> > + ret = phy_init(cdev->dphy);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to initialize the MIPI D-PHY\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int sun6i_mipi_csi2_probe(struct platform_device *pdev)
> > +{
> > + struct sun6i_mipi_csi2_dev *cdev;
> > + int ret;
> > +
> > + cdev = devm_kzalloc(&pdev->dev, sizeof(*cdev), GFP_KERNEL);
> > + if (!cdev)
> > + return -ENOMEM;
> > +
> > + cdev->dev = &pdev->dev;
> > +
> > + ret = sun6i_mipi_csi2_resource_request(cdev, pdev);
> > + if (ret)
> > + return ret;
> > +
> > + platform_set_drvdata(pdev, cdev);
> > +
> > + ret = sun6i_mipi_csi2_v4l2_setup(cdev);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int sun6i_mipi_csi2_remove(struct platform_device *pdev)
> > +{
> > + struct sun6i_mipi_csi2_dev *cdev = platform_get_drvdata(pdev);
> > +
> > + phy_exit(cdev->dphy);
> > +
> > + return sun6i_mipi_csi2_v4l2_teardown(cdev);
> > +}
> > +
> > +static const struct of_device_id sun6i_mipi_csi2_of_match[] = {
> > + { .compatible = "allwinner,sun6i-a31-mipi-csi2" },
> > + { .compatible = "allwinner,sun8i-v3s-mipi-csi2", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, sun6i_mipi_csi2_of_match);
> > +
> > +static struct platform_driver sun6i_mipi_csi2_platform_driver = {
> > + .probe = sun6i_mipi_csi2_probe,
> > + .remove = sun6i_mipi_csi2_remove,
> > + .driver = {
> > + .name = MODULE_NAME,
> > + .of_match_table = of_match_ptr(sun6i_mipi_csi2_of_match),
> > + },
> > +};
> > +module_platform_driver(sun6i_mipi_csi2_platform_driver);
> > +
> > +MODULE_DESCRIPTION("Allwinner A31 MIPI CSI-2 Controller Driver");
> > +MODULE_AUTHOR("Paul Kocialkowski <paul.kocialkow...@bootlin.com>");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
> > b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
> > new file mode 100644
> > index 000000000000..f3cce99bfd44
> > --- /dev/null
> > +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
> > @@ -0,0 +1,116 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright 2020 Bootlin
> > + * Author: Paul Kocialkowski <paul.kocialkow...@bootlin.com>
> > + */
> > +
> > +#ifndef __SUN6I_MIPI_CSI2_H__
> > +#define __SUN6I_MIPI_CSI2_H__
> > +
> > +#include <linux/phy/phy.h>
> > +#include <linux/regmap.h>
> > +#include <linux/reset.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +
> > +#define SUN6I_MIPI_CSI2_CTL_REG 0x0
> > +#define SUN6I_MIPI_CSI2_CTL_RESET_N BIT(31)
> > +#define SUN6I_MIPI_CSI2_CTL_VERSION_EN BIT(30)
> > +#define SUN6I_MIPI_CSI2_CTL_UNPK_EN BIT(1)
> > +#define SUN6I_MIPI_CSI2_CTL_EN BIT(0)
> > +#define SUN6I_MIPI_CSI2_CFG_REG 0x4
> > +#define SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(v) ((((v) - 1) <<
> > 8) & \
> > + GENMASK(9, 8))
> > +#define SUN6I_MIPI_CSI2_CFG_LANE_COUNT(v) (((v) - 1) & GENMASK(1,
> > 0))
> > +#define SUN6I_MIPI_CSI2_VCDT_RX_REG 0x8
> > +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(ch, vc) (((vc) &
> > GENMASK(1, 0)) << \
> > + ((ch) * 8 + 6))
> > +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(ch, t) (((t) &
> > GENMASK(5, 0)) << \
> > + ((ch) * 8))
> > +#define SUN6I_MIPI_CSI2_RX_PKT_NUM_REG 0xc
> > +
> > +#define SUN6I_MIPI_CSI2_VERSION_REG 0x3c
> > +
> > +#define SUN6I_MIPI_CSI2_CH_BASE 0x1000
> > +#define SUN6I_MIPI_CSI2_CH_OFFSET 0x100
> > +
> > +#define SUN6I_MIPI_CSI2_CH_CFG_REG 0x40
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_REG 0x50
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_EOT_ERR BIT(29)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_CHKSUM_ERR BIT(28)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_WRN BIT(27)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_ERR BIT(26)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_SYNC_ERR BIT(25)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_SYNC_ERR BIT(24)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_EMB_DATA BIT(18)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_PF BIT(17)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_PH_UPDATE BIT(16)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_START_SYNC BIT(11)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_END_SYNC BIT(10)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_START_SYNC BIT(9)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_END_SYNC BIT(8)
> > +#define SUN6I_MIPI_CSI2_CH_INT_EN_FIFO_OVER BIT(0)
> > +
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_REG 0x58
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_EOT_ERR BIT(29)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_CHKSUM_ERR BIT(28)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_WRN BIT(27)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_ERR BIT(26)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_SYNC_ERR BIT(25)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_SYNC_ERR BIT(24)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_EMB_DATA BIT(18)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_PF BIT(17)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_PH_UPDATE BIT(16)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_START_SYNC BIT(11)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_END_SYNC BIT(10)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_START_SYNC BIT(9)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_END_SYNC BIT(8)
> > +#define SUN6I_MIPI_CSI2_CH_INT_PD_FIFO_OVER BIT(0)
> > +
> > +#define SUN6I_MIPI_CSI2_CH_DT_TRIGGER_REG 0x60
> > +#define SUN6I_MIPI_CSI2_CH_CUR_PH_REG 0x70
> > +#define SUN6I_MIPI_CSI2_CH_ECC_REG 0x74
> > +#define SUN6I_MIPI_CSI2_CH_CKS_REG 0x78
> > +#define SUN6I_MIPI_CSI2_CH_FRAME_NUM_REG 0x7c
> > +#define SUN6I_MIPI_CSI2_CH_LINE_NUM_REG 0x80
> > +
> > +#define SUN6I_MIPI_CSI2_CH_REG(reg, ch) \
> > + (SUN6I_MIPI_CSI2_CH_BASE + SUN6I_MIPI_CSI2_CH_OFFSET * (ch) + (reg))
> > +
> > +enum mipi_csi2_data_type {
> > + MIPI_CSI2_DATA_TYPE_RAW8 = 0x2a,
> > + MIPI_CSI2_DATA_TYPE_RAW10 = 0x2b,
> > + MIPI_CSI2_DATA_TYPE_RAW12 = 0x2c,
> > +};
> > +
> > +struct sun6i_mipi_csi2_video {
> > + struct v4l2_fwnode_endpoint endpoint;
> > + struct v4l2_subdev subdev;
> > + struct media_pad pads[2];
> > +
> > + struct v4l2_async_subdev subdev_async;
> > + struct v4l2_async_notifier notifier;
> > +
> > + struct v4l2_subdev *remote_subdev;
> > + u32 remote_pad_index;
> > + u32 mbus_code;
> > +};
> > +
> > +struct sun6i_mipi_csi2_dev {
> > + struct device *dev;
> > +
> > + struct regmap *regmap;
> > + struct clk *clk_mod;
> > + struct reset_control *reset;
> > + struct phy *dphy;
> > +
> > + struct sun6i_mipi_csi2_video video;
> > +};
> > +
> > +#define sun6i_mipi_csi2_subdev_video(subdev) \
> > + container_of(subdev, struct sun6i_mipi_csi2_video, subdev)
> > +
> > +#define sun6i_mipi_csi2_video_dev(video) \
> > + container_of(video, struct sun6i_mipi_csi2_dev, video)
> > +
> > +#endif /* __SUN6I_MIPI_CSI2_H__ */
>
> --
> Regards,
>
> Sakari Ailus
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20201105145513.GB615923%40aptenodytes.
signature.asc
Description: PGP signature
