So far all GBit users of the sun8i-emac driver were using the "rgmii"
PHY mode, even though this turns out to be mostly wrong. It just worked
because the PHY driver doesn't do the proper setup (yet).
In fact for most boards the "rgmii-id" or "rgmii-txid" PHY modes are the
correct ones.
To allow the DTs to describe the phy-mode correctly, and to stay
compatible with Linux, at least allow those other RGMII modes in the
driver.
This avoids breakage if mainline DTs will be synced with U-Boot.
An almost identical patch (f1239d8aa84d) was merged into the Linux driver
and has been backported to stable kernels.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
drivers/net/sun8i_emac.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 4524604126c..5db33f5c135 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -353,6 +353,9 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata
*pdata,
/* default */
break;
case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
reg |= SC_EPIT | SC_ETCS_INT_GMII;
break;
case PHY_INTERFACE_MODE_RMII:
--
2.17.5
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20201116094638.15500-1-andre.przywara%40arm.com.
