Hello, currently i am working on GT911, 7 inch touchscreen for OrangePi Plus2E, i can successfully work with I2C bus with no problem and successfully assigned INT and RST pins and touches are being detected but it is reporting wrong X/Y values. I am using this driver from GOODIX https://github.com/goodix/gt9xx_driver_android I am using this configuration array which is 800*480 and i want this resolution, max X value is reaching 360 and Y is 600, I tried to manipulate the second to fifth Byte values which are responsible for X/Y axis resolutions but with no luck. here is my array, i would be glad if i got some help, many thanks.
#define CTP_CFG_GROUP0 {\ 0x43,0x20,0x03,0xE0,0x01,0x0A,0x0D,0x00,0x01,0x2F,\ 0x14,0x0F,0x37,0x28,0x03,0x05,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x00,0x18,0x1A,0x1E,0x14,0x8C,0x2E,0x0E,\ 0x3F,0x3D,0x48,0x09,0x00,0x00,0x00,0xBA,0x02,0x1D,\ 0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\ 0x00,0x1E,0x5A,0x94,0xC5,0x02,0x08,0x00,0x00,0x04,\ 0xEE,0x21,0x00,0xC6,0x29,0x00,0xA1,0x34,0x00,0x7C,\ 0x41,0x00,0x6E,0x51,0x00,0x64,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x02,0x04,0x06,0x08,0x0A,0x0C,0x0E,0x10,\ 0x12,0x14,0x16,0x18,0x1A,0x1C,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x00,0x02,0x04,0x06,0x08,0x0A,0x0C,0x0F,\ 0x10,0x12,0x13,0x14,0x16,0x18,0x1C,0x1D,0x1E,0x1F,\ 0x20,0x21,0x22,0x24,0x26,0x28,0x29,0x2A,0x00,0x00,\ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\ 0x00,0x00,0x00,0x00,0x63,0x01} -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/6892bc99-8434-47ea-b200-12753828415an%40googlegroups.com.