It turns out that there are at least 2 other SoCs which have basically the same memory map, similar clocks and other features as H6. It's very likely that we'll see more such SoCs in the future. In order to ease porting to new SoCs and lower ifdef clutter, introduce common symbol for them.
Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net> --- arch/arm/include/asm/arch-sunxi/boot0.h | 2 +- arch/arm/include/asm/arch-sunxi/clock.h | 2 +- arch/arm/include/asm/arch-sunxi/cpu.h | 2 +- arch/arm/include/asm/arch-sunxi/timer.h | 2 +- arch/arm/mach-sunxi/Kconfig | 21 +++++++++++++-------- arch/arm/mach-sunxi/Makefile | 2 +- arch/arm/mach-sunxi/board.c | 4 ++-- arch/arm/mach-sunxi/rmr_switch.S | 2 +- common/spl/Kconfig | 4 ++-- include/configs/sun50i.h | 2 +- 10 files changed, 24 insertions(+), 19 deletions(-) diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h b/arch/arm/include/asm/arch-sunxi/boot0.h index 46d0f0666c2b..e8e8e38f0556 100644 --- a/arch/arm/include/asm/arch-sunxi/boot0.h +++ b/arch/arm/include/asm/arch-sunxi/boot0.h @@ -39,7 +39,7 @@ .word 0xf57ff06f // isb sy .word 0xe320f003 // wfi .word 0xeafffffd // b @wfi -#ifndef CONFIG_MACH_SUN50I_H6 +#ifndef CONFIG_SUN50I_GEN_H6 .word 0x017000a0 // writeable RVBAR mapping address #else .word 0x09010040 // writeable RVBAR mapping address diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 5994130e6b54..cbbe5c7a1e68 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -16,7 +16,7 @@ /* clock control module regs definition */ #if defined(CONFIG_MACH_SUN8I_A83T) #include <asm/arch/clock_sun8i_a83t.h> -#elif defined(CONFIG_MACH_SUN50I_H6) +#elif defined(CONFIG_SUN50I_GEN_H6) #include <asm/arch/clock_sun50i_h6.h> #elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \ defined(CONFIG_MACH_SUN50I) diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index 8b57d24e2f0c..b08f2023748c 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -8,7 +8,7 @@ #if defined(CONFIG_MACH_SUN9I) #include <asm/arch/cpu_sun9i.h> -#elif defined(CONFIG_MACH_SUN50I_H6) +#elif defined(CONFIG_SUN50I_GEN_H6) #include <asm/arch/cpu_sun50i_h6.h> #else #include <asm/arch/cpu_sun4i.h> diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h index 6f138d04b806..bb5626d893bb 100644 --- a/arch/arm/include/asm/arch-sunxi/timer.h +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -76,7 +76,7 @@ struct sunxi_timer_reg { struct sunxi_tgp tgp[4]; u8 res5[8]; u32 cpu_cfg; -#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) +#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) u8 res3[16]; struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */ #endif diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 49ef217f08c0..1cf79bad7cf6 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -82,7 +82,7 @@ config SUN8I_RSB config SUNXI_SRAM_ADDRESS hex default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5 - default 0x20000 if MACH_SUN50I_H6 + default 0x20000 if SUN50I_GEN_H6 default 0x0 ---help--- Older Allwinner SoCs have their mask boot ROM mapped just below 4GB, @@ -108,6 +108,15 @@ config SUNXI_GEN_SUN6I separate ahb reset control registers, custom pmic bus, new style watchdog, etc. +config SUN50I_GEN_H6 + bool + select FIT + select SPL_LOAD_FIT + select SUPPORT_SPL + ---help--- + Select this for sunxi SoCs which have H6 like peripherals, clocks + and memory map. + config SUNXI_DRAM_DW bool ---help--- @@ -302,10 +311,7 @@ config MACH_SUN50I_H5 config MACH_SUN50I_H6 bool "sun50i (Allwinner H6)" select ARM64 - select SUPPORT_SPL - select FIT select PHY_SUN4I_USB - select SPL_LOAD_FIT select DRAM_SUN50I_H6 endchoice @@ -540,7 +546,6 @@ config SYS_CLK_FREQ default 816000000 if MACH_SUN50I || MACH_SUN50I_H5 default 1008000000 if MACH_SUN8I default 1008000000 if MACH_SUN9I - default 888000000 if MACH_SUN50I_H6 config SYS_CONFIG_NAME default "sun4i" if MACH_SUN4I @@ -756,7 +761,7 @@ config VIDEO_SUNXI depends on !MACH_SUN8I_V3S depends on !MACH_SUN9I depends on !MACH_SUN50I - depends on !MACH_SUN50I_H6 + depends on !SUN50I_GEN_H6 select VIDEO imply VIDEO_DT_SIMPLEFB default y @@ -989,11 +994,11 @@ config SPL_STACK_R_ADDR default 0x4fe00000 if MACH_SUN8I default 0x2fe00000 if MACH_SUN9I default 0x4fe00000 if MACH_SUN50I - default 0x4fe00000 if MACH_SUN50I_H6 + default 0x4fe00000 if SUN50I_GEN_H6 config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6 + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6 help Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so does diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index d129f334798b..b8aca43d6630 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -26,7 +26,7 @@ else obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o -obj-$(CONFIG_MACH_SUN50I_H6) += clock_sun50i_h6.o +obj-$(CONFIG_SUN50I_GEN_H6) += clock_sun50i_h6.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index f40fccd8f8b9..7a8b303f233c 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -144,7 +144,7 @@ static int gpio_init(void) #error Unsupported console port number. Please fix pin mux settings in board.c #endif -#ifdef CONFIG_MACH_SUN50I_H6 +#ifdef CONFIG_SUN50I_GEN_H6 /* Update PIO power bias configuration by copy hardware detected value */ val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL); writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL); @@ -329,7 +329,7 @@ void reset_cpu(ulong addr) /* sun5i sometimes gets stuck without this */ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); } -#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) +#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) #if defined(CONFIG_MACH_SUN50I_H6) /* WDOG is broken for some H6 rev. use the R_WDOG instead */ static const struct sunxi_wdog *wdog = diff --git a/arch/arm/mach-sunxi/rmr_switch.S b/arch/arm/mach-sunxi/rmr_switch.S index fafd306f95b1..33e55d496865 100644 --- a/arch/arm/mach-sunxi/rmr_switch.S +++ b/arch/arm/mach-sunxi/rmr_switch.S @@ -30,7 +30,7 @@ .text -#ifndef CONFIG_MACH_SUN50I_H6 +#ifndef CONFIG_SUN50I_GEN_H6 ldr r1, =0x017000a0 @ MMIO mapped RVBAR[0] register #else ldr r1, =0x09010040 @ MMIO mapped RVBAR[0] register diff --git a/common/spl/Kconfig b/common/spl/Kconfig index d8086bd9e874..bed715774d81 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -150,7 +150,7 @@ config SPL_TEXT_BASE hex "SPL Text Base" default ISW_ENTRY_ADDR if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I - default 0x20060 if MACH_SUN50I_H6 + default 0x20060 if SUN50I_GEN_H6 default 0x00060 if ARCH_SUNXI default 0xfffc0000 if ARCH_ZYNQMP default 0x0 @@ -459,7 +459,7 @@ config SPL_SHA512_SUPPORT config SPL_FIT_IMAGE_TINY bool "Remove functionality from SPL FIT loading to reduce size" depends on SPL_FIT - default y if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6 + default y if MACH_SUN50I || MACH_SUN50I_H5 || SUN50I_GEN_H6 default y if ARCH_IMX8M help Enable this to reduce the size of the FIT image loading code diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h index e050a5299f3b..bc2e3a3d0088 100644 --- a/include/configs/sun50i.h +++ b/include/configs/sun50i.h @@ -10,7 +10,7 @@ * A64 specific configuration */ -#ifndef CONFIG_MACH_SUN50I_H6 +#ifndef CONFIG_SUN50I_GEN_H6 #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 #else -- 2.30.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210103092633.36226-3-jernej.skrabec%40siol.net.