H616 has mostly the same clocks as H6 with some small differences. Just
reuse H6 clocks for H616 and handle differences with macros.
Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net>
---
.../include/asm/arch-sunxi/clock_sun50i_h6.h | 18 +++++++++++++++++-
arch/arm/mach-sunxi/clock_sun50i_h6.c | 10 +++++++++-
2 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
index e83e84ab6cab..62abfc4ef6bd 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -230,6 +230,7 @@ struct sunxi_ccm_reg {
#define CCM_PLL1_CTRL_EN BIT(31)
#define CCM_PLL1_LOCK_EN BIT(29)
#define CCM_PLL1_LOCK BIT(28)
+#define CCM_PLL1_OUT_EN BIT(27)
#define CCM_PLL1_CLOCK_TIME_2 (2 << 24)
#define CCM_PLL1_CTRL_P(p) ((p) << 16)
#define CCM_PLL1_CTRL_N(n) ((n) << 8)
@@ -238,6 +239,7 @@ struct sunxi_ccm_reg {
#define CCM_PLL5_CTRL_EN BIT(31)
#define CCM_PLL5_LOCK_EN BIT(29)
#define CCM_PLL5_LOCK BIT(28)
+#define CCM_PLL5_OUT_EN BIT(27)
#define CCM_PLL5_CTRL_N(n) ((n) << 8)
#define CCM_PLL5_CTRL_DIV1(div1) ((div1) << 0)
#define CCM_PLL5_CTRL_DIV2(div0) ((div0) << 1)
@@ -252,7 +254,6 @@ struct sunxi_ccm_reg {
#define CCM_PLL6_CTRL_DIV1_MASK (0x1 <<
CCM_PLL6_CTRL_DIV1_SHIFT)
#define CCM_PLL6_CTRL_DIV2_SHIFT 1
#define CCM_PLL6_CTRL_DIV2_MASK (0x1 <<
CCM_PLL6_CTRL_DIV2_SHIFT)
-#define CCM_PLL6_DEFAULT 0xa0006300
/* cpu_axi bit field*/
#define CCM_CPU_AXI_MUX_MASK (0x3 << 24)
@@ -262,6 +263,9 @@ struct sunxi_ccm_reg {
#define CCM_CPU_AXI_AXI_MASK 0x3
#define CCM_CPU_AXI_DEFAULT_FACTORS 0x301
+#ifdef CONFIG_MACH_SUN50I_H6
+#define CCM_PLL6_DEFAULT 0xa0006300
+
/* psi_ahb1_ahb2 bit field */
#define CCM_PSI_AHB1_AHB2_DEFAULT 0x03000102
@@ -270,6 +274,18 @@ struct sunxi_ccm_reg {
/* apb1 bit field */
#define CCM_APB1_DEFAULT 0x03000102
+#elif CONFIG_MACH_SUN50I_H616
+#define CCM_PLL6_DEFAULT 0xa8003100
+
+/* psi_ahb1_ahb2 bit field */
+#define CCM_PSI_AHB1_AHB2_DEFAULT 0x03000002
+
+/* ahb3 bit field */
+#define CCM_AHB3_DEFAULT 0x03000002
+
+/* apb1 bit field */
+#define CCM_APB1_DEFAULT 0x03000102
+#endif
/* apb2 bit field */
#define APB2_CLK_SRC_OSC24M (0x0 << 24)
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c
b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index 6bd466915c11..a4cc1b53728b 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -68,6 +68,9 @@ void clock_set_pll1(unsigned int clk)
/* clk = 24*n/p, p is ignored if clock is >288MHz */
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2 |
+#ifdef CONFIG_MACH_SUN50I_H616
+ CCM_PLL1_OUT_EN |
+#endif
CCM_PLL1_CTRL_N(clk / 24000000), &ccm->pll1_cfg);
while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {}
@@ -83,6 +86,11 @@ unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+#ifdef CONFIG_MACH_SUN50I_H6
+ int m = 4;
+#else
+ int m = 2;
+#endif
uint32_t rval = readl(&ccm->pll6_cfg);
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
@@ -91,7 +99,7 @@ unsigned int clock_get_pll6(void)
int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
/* The register defines PLL6-4X, not plain PLL6 */
- return 24000000 / 4 * n / div1 / div2;
+ return 24000000 / m * n / div1 / div2;
}
int clock_twi_onoff(int port, int state)
--
2.30.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20210103092633.36226-9-jernej.skrabec%40siol.net.
