On 03/01/2021 10:00, Jernej Skrabec wrote:
> This commit adds support for Tanix TX6 TV box, based on H6. It's low end
> H6 board, with 3 GiB of RAM, eMMC, fast ethernet, USB, IR and other
> peripherals.
>
> DT file is taken from Linux 5.11-rc1 release.
>
> Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net>
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/sun50i-h6-tanix-tx6.dts | 124 +++++++++++++++++++++++++++
> board/sunxi/MAINTAINERS | 6 ++
> configs/tanix_tx6_defconfig | 11 +++
> 4 files changed, 143 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/sun50i-h6-tanix-tx6.dts
> create mode 100644 configs/tanix_tx6_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index fd47e408f826..e00aed1ec207 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -607,7 +607,8 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
> sun50i-h6-beelink-gs1.dtb \
> sun50i-h6-orangepi-lite2.dtb \
> sun50i-h6-orangepi-one-plus.dtb \
> - sun50i-h6-pine-h64.dtb
> + sun50i-h6-pine-h64.dtb \
> + sun50i-h6-tanix-tx6.dtb
> dtb-$(CONFIG_MACH_SUN50I) += \
> sun50i-a64-amarula-relic.dtb \
> sun50i-a64-bananapi-m64.dtb \
> diff --git a/arch/arm/dts/sun50i-h6-tanix-tx6.dts
> b/arch/arm/dts/sun50i-h6-tanix-tx6.dts
> new file mode 100644
> index 000000000000..be81330db14f
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h6-tanix-tx6.dts
> @@ -0,0 +1,124 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2019 Jernej Skrabec <jernej.skra...@siol.net>
> +
> +/dts-v1/;
> +
> +#include "sun50i-h6.dtsi"
> +#include "sun50i-h6-cpu-opp.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Tanix TX6";
> + compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + connector {
> + compatible = "hdmi-connector";
> + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + reg_vdd_cpu_gpu: vdd-cpu-gpu {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd-cpu-gpu";
> + regulator-min-microvolt = <1135000>;
> + regulator-max-microvolt = <1135000>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <®_vdd_cpu_gpu>;
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&dwc3 {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci3 {
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <®_vdd_cpu_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&mmc0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci3 {
> + status = "okay";
> +};
> +
> +&r_ir {
> + linux,rc-map-name = "rc-tanix-tx5max";
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_ph_pins>;
> + status = "okay";
> +};
> +
> +&usb2otg {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb2phy {
> + status = "okay";
> +};
> +
> +&usb3phy {
> + status = "okay";
> +};
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index d3755ae41a9d..1b37a9899edd 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -489,6 +489,12 @@ S: Maintained
> F: configs/Sunchip_CX-A99_defconfig
> W: https://linux-sunxi.org/Sunchip_CX-A99
>
> +TANIX TX6 BOARD
> +M: Jernej Skrabec <jernej.skra...@siol.net>
> +S: Maintained
> +F: configs/tanix_tx6_defconfig
> +W: https://linux-sunxi.org/Tanix_TX6
> +
> TBS A711 BOARD
> M: Maxime Ripard <mrip...@kernel.org>
> S: Maintained
> diff --git a/configs/tanix_tx6_defconfig b/configs/tanix_tx6_defconfig
> new file mode 100644
> index 000000000000..5b93d1c956fe
> --- /dev/null
> +++ b/configs/tanix_tx6_defconfig
> @@ -0,0 +1,11 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN50I_H6=y
> +CONFIG_SUNXI_DRAM_H6_DDR3_1333=y
> +CONFIG_DRAM_CLK=648
> +CONFIG_MMC0_CD_PIN="PF6"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +# CONFIG_PSCI_RESET is not set
This line is not needed. I know it's in every other H6 defconfig, but it
should go there as well (will try to send patches).
The rest looks alright.
Cheers,
Andre
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-tanix-tx6"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/25cd4d82-7163-6c73-7ef4-709ad35521eb%40arm.com.
