The ChipOne ICN8318 Touchscreen Controller is supported by Linux thanks to its device tree binding.
Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: Dmitry Torokhov <dmitry.torok...@gmail.com> Cc: Hans de Goede <hdego...@redhat.com> Cc: linux-in...@vger.kernel.org Signed-off-by: Maxime Ripard <max...@cerno.tech> --- .../input/touchscreen/chipone,icn8318.yaml | 62 +++++++++++++++++++ .../input/touchscreen/chipone_icn8318.txt | 44 ------------- 2 files changed, 62 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml new file mode 100644 index 000000000000..9df685bdc5db --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings + +maintainers: + - Dmitry Torokhov <dmitry.torok...@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: chipone,icn8318 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wake-gpios: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - wake-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt deleted file mode 100644 index 38b0603f65f3..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt +++ /dev/null @@ -1,44 +0,0 @@ -* ChipOne icn8318 I2C touchscreen controller - -Required properties: - - compatible : "chipone,icn8318" - - reg : I2C slave address of the chip (0x40) - - interrupts : interrupt specification for the icn8318 interrupt - - wake-gpios : GPIO specification for the WAKE input - - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) - - touchscreen-size-y : vertical resolution of touchscreen (in pixels) - -Optional properties: - - pinctrl-names : should be "default" - - pinctrl-0: : a phandle pointing to the pin settings for the - control gpios - - touchscreen-fuzz-x : horizontal noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input - device (in pixels) - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - Swapping is done after inverting the axis - -Example: - -i2c@00000000 { - /* ... */ - - chipone_icn8318@40 { - compatible = "chipone,icn8318"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_wake_pin_p66>; - wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; - - /* ... */ -}; -- 2.31.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210721140424.725744-17-maxime%40cerno.tech.
