On Mon, May 01, 2000 at 06:58:11PM -0400, Robert L. Waite wrote:
> OK, i think i have the module installed, and when i do this...
>
> ftmt -f /dev/qft0 status
>
> i get this...
>
> ftmt: /dev/qft0: Device not configured
i figured i would include an lsmod and dmesg
remote@lothlorien /usr/home/remote $ lsmod
2c-isa 1148 0 (unused)
i2c-dev 3256 0 (unused)
bpck-fdc 30892 0
trakker 15360 0
ftape-internal 10580 0
zft-compressor 16508 -1
zftape 85676 -1 [zft-compressor]
ftape 146872 0 [bpck-fdc trakker ftape-internal zft-compressor
zftape]
lockd 30632 1 (autoclean) [nfs]
sunrpc 51588 1 (autoclean) [nfs lockd]
parport_pc 7236 0
parport 7048 0 [parport_pc]
sensors 5628 0 [w83781d]
i2c-core 10268 0 [w83781d i2c-isa i2c-dev sensors]
nbd 13096 0 (unused)
loop 7616 0 (unused)
[041] 0 fdc-internal.c (fdc_int_detect) - called with count 0.
[042] 0 fdc-internal.c (fdc_int_detect) - fdc[0] base: 0x0210, irq: 6, dma: 0.
[043] 0 ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c5ef9e60, dma area @
c0030000.
[044] 0 ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c5ef95a0, dma area @
c0b68000.
[045] 0 ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c5ef9140, dma area @
c09a8000.
[046] 0 ftape-calibr.c (ftape_calibrate) - calibr_count: 7281, calibr_time: 9998
us.
[047] 0 ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 1373 nsec (at
7281 counts).
[048] 0 fdc-io.c (fdc_reset) - no drive polling interrupt!.
[049] 0 fdc-io.c (__fdc_command) - fdc not ready.
[050] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[051] 0 fdc-io.c (__fdc_command) - fdc not ready.
[052] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[053] 0 fdc-io.c (fdc_probe) - No FDC found.
[054] 0 fdc-io.c (fdc_reset) - no drive polling interrupt!.
[055] 0 fdc-io.c (__fdc_command) - fdc not ready.
[056] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[057] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #3 @ c5ef9140, dma
area @ c09a8000.
[058] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #2 @ c5ef95a0, dma
area @ c0b68000.
[059] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #1 @ c5ef9e60, dma
area @ c0030000.
[060] 0 fdc-io.c (fdc_init) - fdc_init_one(fdc) failed: -6.
[061] 0 ftape-ctl.c (ftape_enable) - fdc_init(ftape) failed: -6.
[062] 0 zftape-ctl.c (_zft_open) - ftape_enable(sel) failed: -6.
[063] 0 zftape-init.c (zft_open) - _zft_open failed.
[064] 0 fdc-internal.c (fdc_int_detect) - called with count 0.
[065] 0 fdc-internal.c (fdc_int_detect) - fdc[0] base: 0x0210, irq: 6, dma: 0.
[066] 0 ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c5ef9320, dma area @
c0030000.
[067] 0 ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c5ef9c80, dma area @
c0b68000.
[068] 0 ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c5ef9140, dma area @
c09a8000.
[069] 0 ftape-calibr.c (ftape_calibrate) - calibr_count: 7280, calibr_time: 9998
us.
[070] 0 ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 1373 nsec (at
7280 counts).
[071] 0 fdc-io.c (fdc_reset) - no drive polling interrupt!.
[072] 0 fdc-io.c (__fdc_command) - fdc not ready.
[073] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[074] 0 fdc-io.c (__fdc_command) - fdc not ready.
[075] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[076] 0 fdc-io.c (fdc_probe) - No FDC found.
[077] 0 fdc-io.c (fdc_reset) - no drive polling interrupt!.
[078] 0 fdc-io.c (__fdc_command) - fdc not ready.
[079] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[080] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #3 @ c5ef9140, dma
area @ c09a8000.
[081] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #2 @ c5ef9c80, dma
area @ c0b68000.
[082] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #1 @ c5ef9320, dma
area @ c0030000.
[083] 0 fdc-io.c (fdc_init) - fdc_init_one(fdc) failed: -6.
[084] 0 ftape-ctl.c (ftape_enable) - fdc_init(ftape) failed: -6.
[085] 0 zftape-ctl.c (_zft_open) - ftape_enable(sel) failed: -6.
[086] 0 zftape-init.c (zft_open) - _zft_open failed.
[087] 0 fdc-internal.c (fdc_int_detect) - called with count 0.
[088] 0 fdc-internal.c (fdc_int_detect) - fdc[0] base: 0x0210, irq: 6, dma: 0.
[089] 0 ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c78422a0, dma area @
c0030000.
[090] 0 ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c5ef95a0, dma area @
c0b68000.
[091] 0 ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c5ef9140, dma area @
c09a8000.
[092] 0 ftape-calibr.c (ftape_calibrate) - calibr_count: 7280, calibr_time: 9998
us.
[093] 0 ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 1373 nsec (at
7280 counts).
[094] 0 fdc-io.c (fdc_reset) - no drive polling interrupt!.
[095] 0 fdc-io.c (__fdc_command) - fdc not ready.
[096] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[097] 0 fdc-io.c (__fdc_command) - fdc not ready.
[098] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[099] 0 fdc-io.c (fdc_probe) - No FDC found.
[100] 0 fdc-io.c (fdc_reset) - no drive polling interrupt!.
[101] 0 fdc-io.c (__fdc_command) - fdc not ready.
[102] 0 fdc-io.c (__fdc_issue_command) - __fdc_command(fdc, out_data, out_count)
failed: -16.
[103] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #3 @ c5ef9140, dma
area @ c09a8000.
[104] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #2 @ c5ef95a0, dma
area @ c0b68000.
[105] 0 ftape-buffer.c (del_one_buffer) - releasing buffer nr #1 @ c78422a0, dma
area @ c0030000.
[106] 0 fdc-io.c (fdc_init) - fdc_init_one(fdc) failed: -6.
[107] 0 ftape-ctl.c (ftape_enable) - fdc_init(ftape) failed: -6.
[108] 0 zftape-ctl.c (_zft_open) - ftape_enable(sel) failed: -6.
[109] 0 zftape-init.c (zft_open) - _zft_open failed.
