[EMAIL PROTECTED] wrote:
>
> I have been trying for over a month to get my Ditto Max tape drive and
> "Iomega 4Mb/s Plug & Play Tape Drive Controller" to work with ftape on
> Redhat Linux 6.2. I works OK with Windows98. Windows reports I/O
> addresses 230-237, IR 11, and DMA 3. My BIOS is set to EPP mode. The
> first indication of an error occurs after running the script containing the
> INSMOD commands with the following messages in /var/log/messages:
Jim,
Linux is not a true PnP supporting OS. You must use the isapnp tools to
recognize and configure the DASH EZ/DX card. If you examine the top of
the insert script provided in the modules directory once the driver is
built, you'll see what I'm talking about. For more info, refer to the
docs in the isapnp package.
ftp://ftp.freesoftware.com/pub/linux/sunsite/system/hardware/isapnptools-1.23.tgz
--
Tim Jones [EMAIL PROTECTED]
Vice President http://www.estinc.com/
Enhanced Software Technologies, Inc. (602) 470-1115
"The BRU Guys"
