On Tue, Jan 24, 2012 at 02:35:19PM +0530, Laxman Dewangan wrote:
> + /*
> + * Rail can not be control from all external input EN1, EN2 and EN3
> + * together.
> + */
> + if ((ext_sleep_config & EXT_SLEEP_CONTROL) == EXT_SLEEP_CONTROL) {
> + dev_err(mfd->dev, "External sleep control flag is not "
> + " not proper\n");
> + return -EINVAL;
> + }
Don't split log messages over multiple lines, it makes grepping the logs
harder. Also, are combinations of two external enables valid?
> +static void tps65910_shutdown(struct platform_device *pdev)
> +{
> + struct tps65910_reg *pmic = platform_get_drvdata(pdev);
> + int i;
> + int err;
> + dev_err(&pdev->dev, "%s() is called\n", __func__);
> +
> + /* Remove all external control before shutting down the device */
> + for (i = 0; i < pmic->num_regulators; i++) {
> + if (!pmic->rdev[i])
> + continue;
> +
> + err = tps65910_set_ext_sleep_config(pmic, i, 0);
> + if (err < 0)
> + dev_err(&pdev->dev, "Error in clearing external "
> + "control\n");
> + }
Why?
> +/*
> + * Regulator mode when rail is in sleep state which controlled by external
> + * input. The regultor will be OFF if it is in sleep state by default but
> + * can be set in LOW power mode by ORing following macro with any of
> + * above exterenl input option.
> + */
> +#define TPS65910_SLEEP_CONTROL_REG_LOW_POWER 0x10
There's the suspend mode API for configuring suspend modes.
> +
> /**
> * struct tps65910_board
> * Board platform data may be used to initialize regulators.
> @@ -779,6 +792,7 @@ struct tps65910_board {
> int irq_base;
> int vmbch_threshold;
> int vmbch2_threshold;
> + unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
I can't see anything in this code which will manage the enable signals?
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
