On Fri, Mar 30, 2012 at 05:00:01PM -0600, Stephen Warren wrote:
> From: Stephen Warren <[email protected]>
> 
> * Rename old pinmux and new pinctrl platform driver and DT match table
>   entries, so the new driver gets instantiated.
> * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the
>   pinmux.
> * Re-write board-*-pinmux.c so that the pinmux configuration tables are
>   in pinctrl format.
> 
> Ventana's pin mux table needed some edits on top of the basic format
> conversion, since some mux options that were previously marked as
> reserved are now valid in the new pinctrl driver. Attempting to use the
> old reserved names will result in a failure. Specifically, groups lpw0,
> lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya,
> and group pta was changed from function rsvd2 to hdmi.
> 
> All boards' pin mux tables needed some edits on top of the based format
> conversion, since function i2c was split into i2c1 (first general I2C
> controller) and i2cp (power I2C controller) to better align function
> definitions with HW blocks.
> 
> Due to the split of mux tables into pure mux and pull/tristate tables,
> many entries in the separate Seaboard/Ventana tables could be merged
> into the common table, since the entries differed only in the portion
> in one of the tables, not both.
> 
> Most pin groups allow configuration of mux, tri-state, and pull. However,
> some don't allow pull configuration, which is instead configured by new
> groups that only allow pull configuration. This is a reflection of the
> true HW capabilities, which weren't fully represented by the old pinmux
> driver. This required adding new pull table entries for those new groups,
> and setting many other entries' pull configuration to
> TEGRA_PINCONFIG_DONT_SET.
> 
> Signed-off-by: Stephen Warren <[email protected]>

This is falling into place quite nicely!

Acked-by: Olof Johansson <[email protected]>


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to