From: Stephen Warren <[email protected]> Move Tegra's debug-macro.S over to the common debug macro directory.
Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <[email protected]> --- arch/arm/Kconfig.debug | 39 +++++ arch/arm/include/debug/tegra.S | 209 +++++++++++++++++++++++ arch/arm/mach-tegra/Kconfig | 30 ---- arch/arm/mach-tegra/include/mach/debug-macro.S | 211 ------------------------ 4 files changed, 248 insertions(+), 241 deletions(-) create mode 100644 arch/arm/include/debug/tegra.S delete mode 100644 arch/arm/mach-tegra/include/mach/debug-macro.S diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b0f3857..18f9e57 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -345,6 +345,13 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_TEGRA_UART + depends on ARCH_TEGRA + bool "Use Tegra UART for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -409,6 +416,37 @@ choice endchoice +choice + prompt "Low-level debug console UART" + depends on DEBUG_LL && DEBUG_TEGRA_UART + default TEGRA_DEBUG_UART_AUTO_ODMDATA + + config TEGRA_DEBUG_UART_AUTO_ODMDATA + bool "Via ODMDATA" + help + Automatically determines which UART to use for low-level debug based + on the ODMDATA value. This value is part of the BCT, and is written + to the boot memory device using nvflash, or other flashing tool. + When bits 19:18 are 3, then bits 17:15 indicate which UART to use; + 0/1/2/3/4 are UART A/B/C/D/E. + + config TEGRA_DEBUG_UARTA + bool "UART A" + + config TEGRA_DEBUG_UARTB + bool "UART B" + + config TEGRA_DEBUG_UARTC + bool "UART C" + + config TEGRA_DEBUG_UARTD + bool "UART D" + + config TEGRA_DEBUG_UARTE + bool "UART E" + +endchoice + config DEBUG_LL_INCLUDE string default "debug/icedcc.S" if DEBUG_ICEDCC @@ -418,6 +456,7 @@ config DEBUG_LL_INCLUDE default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 + default "debug/tegra.S" if DEBUG_TEGRA_UART default "mach/debug-macro.S" config EARLY_PRINTK diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S new file mode 100644 index 0000000..e6aa4bc --- /dev/null +++ b/arch/arm/include/debug/tegra.S @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2010,2011 Google, Inc. + * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. + * + * Author: + * Colin Cross <[email protected]> + * Erik Gilling <[email protected]> + * Doug Anderson <[email protected]> + * Stephen Warren <[email protected]> + * + * Portions based on mach-omap2's debug-macro.S + * Copyright (C) 1994-1999 Russell King + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/serial_reg.h> + +#include <mach/iomap.h> + +#define UART_SHIFT 2 + +#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04) +#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08) +#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c) +#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10) +#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14) +#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18) +#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0) +#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804) + +#define checkuart(rp, rv, lhu, bit, uart) \ + /* Load address of CLK_RST register */ \ + movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \ + movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \ + /* Load value from CLK_RST register */ \ + ldr rp, [rp, #0] ; \ + /* Test UART's reset bit */ \ + tst rp, #(1 << bit) ; \ + /* If set, can't use UART; jump to save no UART */ \ + bne 90f ; \ + /* Load address of CLK_OUT_ENB register */ \ + movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \ + movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \ + /* Load value from CLK_OUT_ENB register */ \ + ldr rp, [rp, #0] ; \ + /* Test UART's clock enable bit */ \ + tst rp, #(1 << bit) ; \ + /* If clear, can't use UART; jump to save no UART */ \ + beq 90f ; \ + /* Passed all tests, load address of UART registers */ \ + movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \ + movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \ + /* Jump to save UART address */ \ + b 91f + + .macro addruart, rp, rv, tmp + adr \rp, 99f @ actual addr of 99f + ldr \rv, [\rp] @ linked addr is stored there + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ linked tegra_uart_config + sub \tmp, \rp, \rv @ actual tegra_uart_config + ldr \rp, [\tmp] @ Load tegra_uart_config + cmp \rp, #1 @ needs initialization? + bne 100f @ no; go load the addresses + mov \rv, #0 @ yes; record init is done + str \rv, [\tmp] + +#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA + /* Check ODMDATA */ +10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff + movt \rp, #TEGRA_PMC_SCRATCH20 >> 16 + ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 + ubfx \rv, \rp, #18, #2 @ 19:18 are console type + cmp \rv, #2 @ 2 and 3 mean DCC, UART + beq 11f @ some boards swap the meaning + cmp \rv, #3 @ so accept either + bne 90f +11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID + cmp \rv, #0 @ UART 0? + beq 20f + cmp \rv, #1 @ UART 1? + beq 21f + cmp \rv, #2 @ UART 2? + beq 22f + cmp \rv, #3 @ UART 3? + beq 23f + cmp \rv, #4 @ UART 4? + beq 24f + b 90f @ invalid +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART A validity */ +20: checkuart(\rp, \rv, L, 6, A) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART B validity */ +21: checkuart(\rp, \rv, L, 7, B) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART C validity */ +22: checkuart(\rp, \rv, H, 23, C) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART D validity */ +23: checkuart(\rp, \rv, U, 1, D) +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \ + defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + /* Check UART E validity */ +24: + checkuart(\rp, \rv, U, 2, E) +#endif + + /* No valid UART found */ +90: mov \rp, #0 + /* fall through */ + + /* Record whichever UART we chose */ +91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys + cmp \rp, #0 @ Valid UART address? + bne 92f @ Yes, go process it + str \rp, [\tmp, #8] @ Store 0 in tegra_uart_phys + b 100f @ Done +92: sub \rv, \rp, #IO_APB_PHYS @ Calculate virt address + add \rv, \rv, #IO_APB_VIRT + str \rv, [\tmp, #8] @ Store in tegra_uart_virt + movw \rv, #TEGRA_APB_MISC_GP_HIDREV & 0xffff + movt \rv, #TEGRA_APB_MISC_GP_HIDREV >> 16 + ldr \rv, [\rv, #0] @ Load HIDREV + ubfx \rv, \rv, #8, #8 @ 15:8 are SoC version + cmp \rv, #0x20 @ Tegra20? + moveq \rv, #0x75 @ Tegra20 divisor + movne \rv, #0xdd @ Tegra30 divisor + str \rv, [\tmp, #12] @ Save divisor to scratch + /* uart[UART_LCR] = UART_LCR_WLEN8 | UART_LCR_DLAB; */ + mov \rv, #UART_LCR_WLEN8 | UART_LCR_DLAB + str \rv, [\rp, #UART_LCR << UART_SHIFT] + /* uart[UART_DLL] = div & 0xff; */ + ldr \rv, [\tmp, #12] + and \rv, \rv, #0xff + str \rv, [\rp, #UART_DLL << UART_SHIFT] + /* uart[UART_DLM] = div >> 8; */ + ldr \rv, [\tmp, #12] + lsr \rv, \rv, #8 + str \rv, [\rp, #UART_DLM << UART_SHIFT] + /* uart[UART_LCR] = UART_LCR_WLEN8; */ + mov \rv, #UART_LCR_WLEN8 + str \rv, [\rp, #UART_LCR << UART_SHIFT] + b 100f + + .align +99: .word . + .word tegra_uart_config + .ltorg + + /* Load previously selected UART address */ +100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys + ldr \rv, [\tmp, #8] @ Load tegra_uart_virt + .endm + +/* + * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra + * check to make sure that the UART address is actually valid. + */ + + .macro senduart, rd, rx + cmp \rx, #0 + strneb \rd, [\rx, #UART_TX << UART_SHIFT] +1001: + .endm + + .macro busyuart, rd, rx + cmp \rx, #0 + beq 1002f +1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1001b +1002: + .endm + + .macro waituart, rd, rx +#ifdef FLOW_CONTROL + cmp \rx, #0 + beq 1002f +1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +1002: +#endif + .endm diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 87f0e2d..6b23f23 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -57,36 +57,6 @@ config TEGRA_AHB which controls AHB bus master arbitration and some perfomance parameters(priority, prefech size). -choice - prompt "Low-level debug console UART" - default TEGRA_DEBUG_UART_AUTO_ODMDATA - -config TEGRA_DEBUG_UART_AUTO_ODMDATA - bool "Via ODMDATA" - help - Automatically determines which UART to use for low-level debug based - on the ODMDATA value. This value is part of the BCT, and is written - to the boot memory device using nvflash, or other flashing tool. - When bits 19:18 are 3, then bits 17:15 indicate which UART to use; - 0/1/2/3/4 are UART A/B/C/D/E. - -config TEGRA_DEBUG_UARTA - bool "UART-A" - -config TEGRA_DEBUG_UARTB - bool "UART-B" - -config TEGRA_DEBUG_UARTC - bool "UART-C" - -config TEGRA_DEBUG_UARTD - bool "UART-D" - -config TEGRA_DEBUG_UARTE - bool "UART-E" - -endchoice - config TEGRA_EMC_SCALING_ENABLE bool "Enable scaling the memory frequency" diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S deleted file mode 100644 index 6ba3502..0000000 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ /dev/null @@ -1,211 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/debug-macro.S - * - * Copyright (C) 2010,2011 Google, Inc. - * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. - * - * Author: - * Colin Cross <[email protected]> - * Erik Gilling <[email protected]> - * Doug Anderson <[email protected]> - * Stephen Warren <[email protected]> - * - * Portions based on mach-omap2's debug-macro.S - * Copyright (C) 1994-1999 Russell King - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/serial_reg.h> - -#include <mach/iomap.h> - -#define UART_SHIFT 2 - -#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04) -#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08) -#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c) -#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10) -#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14) -#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18) -#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0) -#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804) - -#define checkuart(rp, rv, lhu, bit, uart) \ - /* Load address of CLK_RST register */ \ - movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \ - movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \ - /* Load value from CLK_RST register */ \ - ldr rp, [rp, #0] ; \ - /* Test UART's reset bit */ \ - tst rp, #(1 << bit) ; \ - /* If set, can't use UART; jump to save no UART */ \ - bne 90f ; \ - /* Load address of CLK_OUT_ENB register */ \ - movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \ - movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \ - /* Load value from CLK_OUT_ENB register */ \ - ldr rp, [rp, #0] ; \ - /* Test UART's clock enable bit */ \ - tst rp, #(1 << bit) ; \ - /* If clear, can't use UART; jump to save no UART */ \ - beq 90f ; \ - /* Passed all tests, load address of UART registers */ \ - movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \ - movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \ - /* Jump to save UART address */ \ - b 91f - - .macro addruart, rp, rv, tmp - adr \rp, 99f @ actual addr of 99f - ldr \rv, [\rp] @ linked addr is stored there - sub \rv, \rv, \rp @ offset between the two - ldr \rp, [\rp, #4] @ linked tegra_uart_config - sub \tmp, \rp, \rv @ actual tegra_uart_config - ldr \rp, [\tmp] @ Load tegra_uart_config - cmp \rp, #1 @ needs initialization? - bne 100f @ no; go load the addresses - mov \rv, #0 @ yes; record init is done - str \rv, [\tmp] - -#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA - /* Check ODMDATA */ -10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff - movt \rp, #TEGRA_PMC_SCRATCH20 >> 16 - ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 - ubfx \rv, \rp, #18, #2 @ 19:18 are console type - cmp \rv, #2 @ 2 and 3 mean DCC, UART - beq 11f @ some boards swap the meaning - cmp \rv, #3 @ so accept either - bne 90f -11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID - cmp \rv, #0 @ UART 0? - beq 20f - cmp \rv, #1 @ UART 1? - beq 21f - cmp \rv, #2 @ UART 2? - beq 22f - cmp \rv, #3 @ UART 3? - beq 23f - cmp \rv, #4 @ UART 4? - beq 24f - b 90f @ invalid -#endif - -#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \ - defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - /* Check UART A validity */ -20: checkuart(\rp, \rv, L, 6, A) -#endif - -#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \ - defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - /* Check UART B validity */ -21: checkuart(\rp, \rv, L, 7, B) -#endif - -#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \ - defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - /* Check UART C validity */ -22: checkuart(\rp, \rv, H, 23, C) -#endif - -#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \ - defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - /* Check UART D validity */ -23: checkuart(\rp, \rv, U, 1, D) -#endif - -#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \ - defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - /* Check UART E validity */ -24: - checkuart(\rp, \rv, U, 2, E) -#endif - - /* No valid UART found */ -90: mov \rp, #0 - /* fall through */ - - /* Record whichever UART we chose */ -91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys - cmp \rp, #0 @ Valid UART address? - bne 92f @ Yes, go process it - str \rp, [\tmp, #8] @ Store 0 in tegra_uart_phys - b 100f @ Done -92: sub \rv, \rp, #IO_APB_PHYS @ Calculate virt address - add \rv, \rv, #IO_APB_VIRT - str \rv, [\tmp, #8] @ Store in tegra_uart_virt - movw \rv, #TEGRA_APB_MISC_GP_HIDREV & 0xffff - movt \rv, #TEGRA_APB_MISC_GP_HIDREV >> 16 - ldr \rv, [\rv, #0] @ Load HIDREV - ubfx \rv, \rv, #8, #8 @ 15:8 are SoC version - cmp \rv, #0x20 @ Tegra20? - moveq \rv, #0x75 @ Tegra20 divisor - movne \rv, #0xdd @ Tegra30 divisor - str \rv, [\tmp, #12] @ Save divisor to scratch - /* uart[UART_LCR] = UART_LCR_WLEN8 | UART_LCR_DLAB; */ - mov \rv, #UART_LCR_WLEN8 | UART_LCR_DLAB - str \rv, [\rp, #UART_LCR << UART_SHIFT] - /* uart[UART_DLL] = div & 0xff; */ - ldr \rv, [\tmp, #12] - and \rv, \rv, #0xff - str \rv, [\rp, #UART_DLL << UART_SHIFT] - /* uart[UART_DLM] = div >> 8; */ - ldr \rv, [\tmp, #12] - lsr \rv, \rv, #8 - str \rv, [\rp, #UART_DLM << UART_SHIFT] - /* uart[UART_LCR] = UART_LCR_WLEN8; */ - mov \rv, #UART_LCR_WLEN8 - str \rv, [\rp, #UART_LCR << UART_SHIFT] - b 100f - - .align -99: .word . - .word tegra_uart_config - .ltorg - - /* Load previously selected UART address */ -100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys - ldr \rv, [\tmp, #8] @ Load tegra_uart_virt - .endm - -/* - * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra - * check to make sure that the UART address is actually valid. - */ - - .macro senduart, rd, rx - cmp \rx, #0 - strneb \rd, [\rx, #UART_TX << UART_SHIFT] -1001: - .endm - - .macro busyuart, rd, rx - cmp \rx, #0 - beq 1002f -1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1001b -1002: - .endm - - .macro waituart, rd, rx -#ifdef FLOW_CONTROL - cmp \rx, #0 - beq 1002f -1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -1002: -#endif - .endm -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
