On 10/15/2013 09:27 AM, Thierry Reding wrote:
> Add a device node for the MIPI calibration block on Tegra114. There is
> no need to disable it by default because it only enables the clock while
> performing calibration and therefore shouldn't be consuming any power
> when unused.
> diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
> + mipi: mipi {
> + compatible = "nvidia,tegra114-mipi";
> + reg = <0x700e3000 0x100>;
> + clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
> + #calibrate-cells = <1>;
> + };
Do you have a link to the binding documentation for this? I'm still in
the dark re: why there's a need for #calibrate-cells at all. It seems
like this should be some internal implementation detail of the Tegra
DC/..., or implicit based on the compatible value (if cell count
changes, just rev the compatible value; it's not like this is a generic
service for loosely coupled drivers).
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
