On 16 June 2015 at 22:32, Stephen Warren <swar...@wwwdotorg.org> wrote: > On 06/16/2015 02:42 AM, Tomeu Vizoso wrote: >> >> On 2 June 2015 at 17:40, Stephen Warren <swar...@wwwdotorg.org> wrote: >>> >>> On 06/02/2015 05:28 AM, Linus Walleij wrote: >>>> >>>> >>>> On Tue, May 26, 2015 at 9:41 PM, Stephen Warren <swar...@wwwdotorg.org> >>>> wrote: >>>>> >>>>> >>>>> On 05/25/2015 08:53 AM, Tomeu Vizoso wrote: >>>>>> >>>>>> >>>>>> >>>>>> Specify how the GPIOs map to the pins in T124, so the dependency is >>>>>> explicit. >>>>>> >>>>>> Signed-off-by: Tomeu Vizoso <tomeu.viz...@collabora.com> >>>>>> --- >>>>>> arch/arm/boot/dts/tegra124.dtsi | 1 + >>>>>> 1 file changed, 1 insertion(+) >>>>>> >>>>>> diff --git a/arch/arm/boot/dts/tegra124.dtsi >>>>>> b/arch/arm/boot/dts/tegra124.dtsi >>>>>> index 13cc7ca..5d1d35f 100644 >>>>>> --- a/arch/arm/boot/dts/tegra124.dtsi >>>>>> +++ b/arch/arm/boot/dts/tegra124.dtsi >>>>>> @@ -254,6 +254,7 @@ >>>>>> gpio-controller; >>>>>> #interrupt-cells = <2>; >>>>>> interrupt-controller; >>>>>> + gpio-ranges = <&pinmux 0 0 250>; >>>>> >>>>> >>>>> >>>>> >>>>> We should be consistent between SoCs. Why not make the same change for >>>>> all >>>>> Tegra SoCs? >>>> >>>> >>>> >>>> Agreed. >>>> >>>>> I think this change will cause the GPIO subsystem to call into the >>>>> pinctrl >>>>> subsystem and create/add/register a new GPIO<->pinctrl range structure. >>>>> The >>>>> pinctrl driver already does this, so I think we'll end up with two >>>>> duplicate >>>>> entries in the pinctrl device's gpio_ranges list. This probably won't >>>>> cause >>>>> a problem, but I wanted to make sure you'd thought about it to make >>>>> sure. >>>> >>>> >>>> >>>> That sounds like duplication indeed, I would expect that first a patch >>>> adds the ranges to the dts[i] files and then a second patch delete the >>>> same ranges from the pinctrl driver then, if these shall come in from >>>> the device tree. >>> >>> >>> >>> We can't delete the gpio-range-registration code from the Tegra pinmux >>> driver, or old DTs won't work correctly. We could make it conditional >>> based >>> upon whether the DT contains the property or not. >> >> >> I've been looking at this and haven't found a good solution. From what >> I see, the pinctrl driver doesn't have a reference to the gpio device >> node so cannot tell if it needs to add the range or not. > > > Well, we know what the node must be called, so the pinctrl driver could > search for it by name.
Ok, will write something in this direction. >> The gpio driver can tell whether it should add the range or not, but >> if it has to because the gpio-ranges property isn't there, then it >> doesn't have the reference to the pinctrl device to set the range to. >> >> So, given that pinctrl_add_gpio_range is deprecated already, wonder if >> the lesser evil isn't leaving the duplicated entries for now. On newer >> SoC revisions such as T210 we can stop calling pinctrl_add_gpio_range >> at all. >> >> Or, we can accept that nobody is going to boot a newer kernel with an >> older DT on the affected boards and just rely on the presence of the >> gpio-ranges property :) > > > Isn't the simplest solution to just leave it as it is? Nothing's broken is > it? Well, without an explicit dependency from the gpio node to the pinctrl node I cannot avoid a deferred probe (which will cause other deferred probes in turn). > For any new SoCs we add, we can certainly switch to a new scheme if we want, > but we need to catch/implement that early before the base .dtsi file is > included in its first kernel release. Definitely. Regards, Tomeu > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
