The enable GPIO is active low, but is flagged as active high in the gpio property. As the gpio property flags are currently unused by the driver this doesn't cause any issue for now, but will break later if the driver starts making use of the flags. Fix it.
Signed-off-by: Laurent Pinchart <[email protected]> --- arch/arm/boot/dts/tegra20-iris-512.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Cc: [email protected] Cc: Stephen Warren <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Alexandre Courbot <[email protected]> diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 1dd7d7bfdfcc..9b04a367575c 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -85,7 +85,7 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; regulator-always-on; - gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; }; vcc_sd_reg: regulator@1 { -- 2.4.9 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
