Hi,
I have a problem with the usb-storage.o module for kernel 2.4.1 and 2.4.2.
The problem is that while it loads Ok, when I plug in the floppy drive
belonging to my notebook computer (a Sharp PC-AX20) the load goes up
above 2.0 and stays there. I also cannot access any floppy I insert.
I have tried this with a 2.2.18 kernel and instead of the load going
up above 2.0 it goes up above 1.0 and I can read/write/format floppies
normally.
Below is the output from "top", /var/log/messages and "dmesg" after
booting the 2.4.2 kernel in single-user mode, starting syslogd, and then
loading the USB core and usb-storage modules by hand using modprobe.
BTW, other USB devices, such as the mouse and keyboard, work fine.
Any help appreciated.
Thanks muchly,
Peter Linich
Senior Network Administrator/Team Leader
School of Computer Science and Engineering
University of New South Wales
Kensington NSW 2052
Australia
Email: [EMAIL PROTECTED]
Phone: +61-2-9385-5526
Fax: +61-2-9385-5995
--------------------------------------------------------------------------------
2:33am up 5 min, 0 users, load average: 2.01, 1.01, 0.39
15 processes: 14 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: 0.1% user, 2.0% system, 0.0% nice, 97.7% idle
Mem: 191372K av, 10428K used, 180944K free, 0K shrd, 1172K buff
Swap: 136544K av, 0K used, 136544K free 5868K cached
PID USER PRI NI SIZE RSS SHARE STAT LIB %CPU %MEM TIME COMMAND
1 root 8 0 440 440 400 S 0 0.0 0.2 0:04 init
2 root 9 0 0 0 0 SW 0 0.0 0.0 0:00 keventd
3 root 9 0 0 0 0 SW 0 0.0 0.0 0:00 kapm-idled
4 root 9 0 0 0 0 SW 0 0.0 0.0 0:00 kswapd
5 root 9 0 0 0 0 SW 0 0.0 0.0 0:00 kreclaimd
6 root 9 0 0 0 0 SW 0 0.0 0.0 0:00 bdflush
7 root 9 0 0 0 0 SW 0 0.0 0.0 0:00 kupdate
166 root 9 0 440 440 400 S 0 0.0 0.2 0:00 init
167 root 12 0 924 924 732 S 0 0.0 0.4 0:00 sh
178 root 9 0 524 524 428 S 0 0.0 0.2 0:00 syslogd
187 root 9 0 976 976 388 S 0 0.0 0.5 0:00 klogd
193 root 9 0 0 0 0 DW 0 0.0 0.0 0:00 khubd
201 root 9 0 0 0 0 SW 0 0.0 0.0 0:00 usb-storage-
202 root 9 0 0 0 0 DW 0 0.0 0.0 0:00 scsi_eh_0
225 root 12 0 848 848 668 R 0 0.0 0.4 0:00 top
--------------------------------------------------------------------------------
Linux version 2.4.2 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #8 Mon Mar 5 02:14:24 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 000000000bef0000 @ 0000000000100000 (usable)
BIOS-e820: 000000000000ffc0 @ 000000000bff0000 (ACPI data)
BIOS-e820: 0000000000000040 @ 000000000bffffc0 (ACPI NVS)
BIOS-e820: 0000000000040000 @ 00000000fffc0000 (reserved)
On node 0 totalpages: 49136
zone(0): 4096 pages.
zone(1): 45040 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux-2.4.2 ro root=304 single
Initializing CPU#0
Detected 600.024 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1196.03 BogoMIPS
Memory: 191192k/196544k available (927k kernel code, 4964k reserved, 371k data, 180k
init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeb180, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7198] at 00:07.0
PCI: BIOS reporting unknown device 00:01
PCI: BIOS reporting unknown device 00:02
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 126920kB/42306kB, 384 slots per queue
loop: enabling 8 loop devices
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 0
PIIX4: not 100% native mode: will probe irqs later
hda: TOSHIBA MK1214GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 23579136 sectors (12073 MB), CHS=1467/255/63
Partition check:
hda: hda1 hda2 hda3 hda4
floppy0: no floppy controllers found
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
8139too Fast Ethernet driver 0.9.13 loaded
PCI: Found IRQ 11 for device 00:0a.0
PCI: The same IRQ used for device 00:07.2
eth0: RealTek RTL8139 Fast Ethernet at 0xcc800000, 00:40:d0:12:fc:1c, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139B'
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ip_conntrack (1535 buckets, 12280 max)
ip_tables: (c)2000 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 180k freed
Adding Swap: 136544k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:07.2
PCI: The same IRQ used for device 00:0a.0
uhci.c: USB UHCI at I/O 0x1200, IRQ 11
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: root-hub INT complete: port1: 93 port2: 93 data: 6
hub.c: USB new device connect on bus1/1, assigned device number 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: USB new device connect on bus1/2, assigned device number 3
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: USB new device connect on bus1/1/1, assigned device number 4
usb.c: USB device 4 (vend/prod 0x5ac/0x204) is not claimed by any active driver.
hub.c: USB new device connect on bus1/1/2, assigned device number 5
usb.c: USB device 5 (vend/prod 0x46d/0xc00b) is not claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: USB new device connect on bus1/2/3, assigned device number 6
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 34
usb-storage: Array length appears to be: 44
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xcbfeeb60 Out: 0xcbfeeb74 Int: 0xcbfeeb88 (Period 255)
usb-storage: New GUID 03ee69010000000000000000
usb-storage: Transport: Control/Bulk/Interrupt
usb-storage: Protocol: Uniform Floppy Interface (UFI)
usb-storage: Allocating IRQ for CBI transport
usb-storage: usb_submit_urb() returns 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 fe cb 07 00 00 00
usb-storage: Call to usb_stor_control_msg() returned 12
usb-storage: usb_stor_transfer_partial(): xfer 36 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/36
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: CBI data stage result is 0x0
usb-storage: Current value of ip_waitq is: 0
usb-storage: USB IRQ recieved for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: -- Current value of ip_waitq is: -1
usb-storage: Got interrupt data (0x0, 0x0)
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: MITSUMI Model: USB FDD Rev: 1033
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 20 00 00 ff 00 fe cb 07 00 00 00
usb-storage: Call to usb_stor_control_msg() returned -32
usb-storage: -- Stall on control pipe. Clearing
usb-storage: -- clear_halt() returns 0
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Call to usb_stor_control_msg() returned -32
usb-storage: -- Stall on control pipe. Clearing
usb-storage: -- clear_halt() returns 0
usb-storage: -- auto-sense failure
usb-storage: CB_reset() called
usb-storage: USB IRQ recieved for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: ERROR: Unwanted interrupt received!
usb-storage: command_abort() called
usb-storage: -- nothing to abort
usb-storage: device_reset() called
usb-storage: CB_reset() called
usb-storage: CB_reset: clearing endpoint halt
usb-storage: CB_reset done
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: USB IRQ recieved for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: ERROR: Unwanted interrupt received!
usb-storage: CB_reset: clearing endpoint halt
usb-storage: CB_reset done
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 20 00 00 00 00 fe cb 07 00 00 00
usb-storage: Call to usb_stor_control_msg() returned -32
usb-storage: -- Stall on control pipe. Clearing
usb-storage: -- clear_halt() returns 0
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Call to usb_stor_control_msg() returned -32
usb-storage: -- Stall on control pipe. Clearing
usb-storage: -- clear_halt() returns 0
usb-storage: -- auto-sense failure
usb-storage: CB_reset() called
usb-storage: USB IRQ recieved for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: ERROR: Unwanted interrupt received!
usb-storage: CB_reset: clearing endpoint halt
usb-storage: CB_reset done
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: bus_reset() called
usb-storage: -- releasing irq URB
usb-storage: USB IRQ recieved for device on host 0
usb-storage: -- IRQ data length is 0
usb-storage: -- IRQ state is -2
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: -- IRQ too short
usb-storage: -- usb_unlink_urb() returned 0
--------------------------------------------------------------------------------
Mar 5 02:28:14 notebook syslogd 1.3-3: restart.
Mar 5 02:28:14 notebook syslog: syslogd startup succeeded
Mar 5 02:28:14 notebook kernel: klogd 1.3-3, log source = /proc/kmsg started.
Mar 5 02:28:14 notebook kernel: Inspecting /boot/System.map-2.4.2
Mar 5 02:28:14 notebook syslog: klogd startup succeeded
Mar 5 02:28:14 notebook kernel: Loaded 13354 symbols from /boot/System.map-2.4.2.
Mar 5 02:28:14 notebook kernel: Symbols match kernel version 2.4.2.
Mar 5 02:28:14 notebook kernel: No module symbols loaded.
Mar 5 02:28:14 notebook kernel: Linux version 2.4.2 ([EMAIL PROTECTED]) (gcc
version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #8 Mon Mar 5 02:14:24 EST
2001
Mar 5 02:28:14 notebook kernel: BIOS-provided physical RAM map:
Mar 5 02:28:14 notebook kernel: BIOS-e820: 000000000009fc00 @ 0000000000000000
(usable)
Mar 5 02:28:14 notebook kernel: BIOS-e820: 0000000000000400 @ 000000000009fc00
(reserved)
Mar 5 02:28:14 notebook kernel: BIOS-e820: 0000000000010000 @ 00000000000f0000
(reserved)
Mar 5 02:28:14 notebook kernel: BIOS-e820: 000000000bef0000 @ 0000000000100000
(usable)
Mar 5 02:28:14 notebook kernel: BIOS-e820: 000000000000ffc0 @ 000000000bff0000 (ACPI
data)
Mar 5 02:28:14 notebook kernel: BIOS-e820: 0000000000000040 @ 000000000bffffc0 (ACPI
NVS)
Mar 5 02:28:14 notebook kernel: BIOS-e820: 0000000000040000 @ 00000000fffc0000
(reserved)
Mar 5 02:28:14 notebook kernel: On node 0 totalpages: 49136
Mar 5 02:28:14 notebook kernel: zone(0): 4096 pages.
Mar 5 02:28:14 notebook kernel: zone(1): 45040 pages.
Mar 5 02:28:14 notebook kernel: zone(2): 0 pages.
Mar 5 02:28:14 notebook kernel: Kernel command line: BOOT_IMAGE=linux-2.4.2 ro
root=304 single
Mar 5 02:28:14 notebook kernel: Initializing CPU#0
Mar 5 02:28:14 notebook kernel: Detected 600.024 MHz processor.
Mar 5 02:28:14 notebook kernel: Console: colour VGA+ 80x25
Mar 5 02:28:14 notebook kernel: Calibrating delay loop... 1196.03 BogoMIPS
Mar 5 02:28:14 notebook kernel: Memory: 191192k/196544k available (927k kernel code,
4964k reserved, 371k data, 180k init, 0k highmem)
Mar 5 02:28:14 notebook kernel: Dentry-cache hash table entries: 32768 (order: 6,
262144 bytes)
Mar 5 02:28:14 notebook kernel: Buffer-cache hash table entries: 8192 (order: 3,
32768 bytes)
Mar 5 02:28:14 notebook kernel: Page-cache hash table entries: 65536 (order: 6,
262144 bytes)
Mar 5 02:28:14 notebook kernel: Inode-cache hash table entries: 16384 (order: 5,
131072 bytes)
Mar 5 02:28:14 notebook kernel: CPU: Before vendor init, caps: 0383f9ff 00000000
00000000, vendor = 0
Mar 5 02:28:14 notebook kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 5 02:28:14 notebook kernel: CPU: L2 cache: 256K
Mar 5 02:28:14 notebook kernel: Intel machine check architecture supported.
Mar 5 02:28:14 notebook kernel: Intel machine check reporting enabled on CPU#0.
Mar 5 02:28:14 notebook kernel: CPU: After vendor init, caps: 0383f9ff 00000000
00000000 00000000
Mar 5 02:28:14 notebook kernel: CPU: After generic, caps: 0383f9ff 00000000 00000000
00000000
Mar 5 02:28:14 notebook kernel: CPU: Common caps: 0383f9ff 00000000 00000000 00000000
Mar 5 02:28:14 notebook kernel: CPU: Intel Pentium III (Coppermine) stepping 03
Mar 5 02:28:14 notebook kernel: Enabling fast FPU save and restore... done.
Mar 5 02:28:14 notebook kernel: Enabling unmasked SIMD FPU exception support... done.
Mar 5 02:28:14 notebook kernel: Checking 'hlt' instruction... OK.
Mar 5 02:28:15 notebook kernel: POSIX conformance testing by UNIFIX
Mar 5 02:28:15 notebook kernel: PCI: PCI BIOS revision 2.10 entry at 0xeb180, last
bus=0
Mar 5 02:28:15 notebook kernel: PCI: Using configuration type 1
Mar 5 02:28:15 notebook kernel: PCI: Probing PCI hardware
Mar 5 02:28:15 notebook kernel: PCI: Using IRQ router PIIX [8086/7198] at 00:07.0
Mar 5 02:28:15 notebook kernel: PCI: BIOS reporting unknown device 00:01
Mar 5 02:28:15 notebook kernel: PCI: BIOS reporting unknown device 00:02
Mar 5 02:28:15 notebook kernel: Linux NET4.0 for Linux 2.4
Mar 5 02:28:15 notebook kernel: Based upon Swansea University Computer Society
NET3.039
Mar 5 02:28:15 notebook kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version
1.14)
Mar 5 02:28:15 notebook kernel: Starting kswapd v1.8
Mar 5 02:28:15 notebook kernel: pty: 256 Unix98 ptys configured
Mar 5 02:28:15 notebook kernel: block: queued sectors max/low 126920kB/42306kB, 384
slots per queue
Mar 5 02:28:15 notebook kernel: loop: enabling 8 loop devices
Mar 5 02:28:15 notebook kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Mar 5 02:28:15 notebook kernel: ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
Mar 5 02:28:15 notebook kernel: PIIX4: IDE controller on PCI bus 00 dev 39
Mar 5 02:28:15 notebook kernel: PIIX4: chipset revision 0
Mar 5 02:28:15 notebook kernel: PIIX4: not 100%% native mode: will probe irqs later
Mar 5 02:28:15 notebook kernel: hda: TOSHIBA MK1214GAP, ATA DISK drive
Mar 5 02:28:15 notebook kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 5 02:28:15 notebook kernel: hda: 23579136 sectors (12073 MB), CHS=1467/255/63
Mar 5 02:28:15 notebook kernel: Partition check:
Mar 5 02:28:15 notebook kernel: hda: hda1 hda2 hda3 hda4
Mar 5 02:28:15 notebook kernel: floppy0: no floppy controllers found
Mar 5 02:28:15 notebook kernel: Serial driver version 5.02 (2000-08-09) with
MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Mar 5 02:28:15 notebook kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Mar 5 02:28:15 notebook kernel: Real Time Clock Driver v1.10d
Mar 5 02:28:15 notebook kernel: 8139too Fast Ethernet driver 0.9.13 loaded
Mar 5 02:28:15 notebook kernel: PCI: Found IRQ 11 for device 00:0a.0
Mar 5 02:28:15 notebook kernel: PCI: The same IRQ used for device 00:07.2
Mar 5 02:28:15 notebook kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xcc800000,
00:40:d0:12:fc:1c, IRQ 11
Mar 5 02:28:15 notebook kernel: SCSI subsystem driver Revision: 1.00
Mar 5 02:28:15 notebook kernel: request_module[scsi_hostadapter]: Root fs not mounted
Mar 5 02:28:15 notebook kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 5 02:28:15 notebook kernel: IP Protocols: ICMP, UDP, TCP
Mar 5 02:28:15 notebook kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Mar 5 02:28:15 notebook kernel: TCP: Hash tables configured (established 16384 bind
16384)
Mar 5 02:28:15 notebook kernel: ip_conntrack (1535 buckets, 12280 max)
Mar 5 02:28:15 notebook kernel: ip_tables: (c)2000 Netfilter core team
Mar 5 02:28:15 notebook kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 5 02:28:15 notebook kernel: VFS: Mounted root (ext2 filesystem) readonly.
Mar 5 02:28:15 notebook kernel: Freeing unused kernel memory: 180k freed
Mar 5 02:28:15 notebook kernel: Adding Swap: 136544k swap-space (priority -1)
Mar 5 02:27:55 notebook rc.sysinit: Mounting proc filesystem succeeded
Mar 5 02:27:55 notebook sysctl: net.ipv4.ip_forward = 0
Mar 5 02:27:55 notebook sysctl: net.ipv4.conf.all.rp_filter = 1
Mar 5 02:27:55 notebook sysctl: error: 'net.ipv4.ip_always_defrag' is an unknown key
Mar 5 02:27:55 notebook sysctl: error: 'kernel.sysrq' is an unknown key
Mar 5 02:27:55 notebook rc.sysinit: Configuring kernel parameters succeeded
Mar 5 02:27:55 notebook date: Mon Mar 5 02:27:54 EST 2001
Mar 5 02:27:55 notebook rc.sysinit: Setting clock (utc): Mon Mar 5 02:27:54 EST
2001 succeeded
Mar 5 02:27:55 notebook rc.sysinit: Loading default keymap succeeded
Mar 5 02:27:55 notebook rc.sysinit: Activating swap partitions succeeded
Mar 5 02:27:55 notebook rc.sysinit: Setting hostname notebook.local succeeded
Mar 5 02:27:55 notebook fsck: /dev/hda4: clean, 88418/1146880 files, 1900434/2293278
blocks
Mar 5 02:27:55 notebook rc.sysinit: Checking root filesystem succeeded
Mar 5 02:27:55 notebook rc.sysinit: Remounting root filesystem in read-write mode
succeeded
Mar 5 02:27:55 notebook rc.sysinit: Finding module dependencies succeeded
Mar 5 02:27:56 notebook rc.sysinit: Checking filesystems succeeded
Mar 5 02:27:56 notebook modprobe: modprobe: Can't locate module nls_cp437
Mar 5 02:27:56 notebook modprobe: modprobe: Can't locate module nls_iso8859-1
Mar 5 02:27:56 notebook last message repeated 2 times
Mar 5 02:27:56 notebook rc.sysinit: Mounting local filesystems succeeded
Mar 5 02:27:56 notebook rc.sysinit: Turning on user and group quotas for local
filesystems succeeded
Mar 5 02:27:57 notebook rc.sysinit: Enabling swap space succeeded
Mar 5 02:28:54 notebook kernel: usb.c: registered new driver usbdevfs
Mar 5 02:28:54 notebook kernel: usb.c: registered new driver hub
Mar 5 02:28:54 notebook kernel: PCI: Found IRQ 11 for device 00:07.2
Mar 5 02:28:54 notebook kernel: PCI: The same IRQ used for device 00:0a.0
Mar 5 02:28:54 notebook kernel: uhci.c: USB UHCI at I/O 0x1200, IRQ 11
Mar 5 02:28:54 notebook kernel: uhci.c: detected 2 ports
Mar 5 02:28:54 notebook kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 5 02:28:54 notebook kernel: hub.c: USB hub found
Mar 5 02:28:54 notebook kernel: hub.c: 2 ports detected
Mar 5 02:28:54 notebook kernel: hub.c: USB new device connect on bus1/1, assigned
device number 2
Mar 5 02:28:54 notebook kernel: hub.c: USB hub found
Mar 5 02:28:54 notebook kernel: hub.c: 3 ports detected
Mar 5 02:28:54 notebook kernel: hub.c: USB new device connect on bus1/2, assigned
device number 3
Mar 5 02:28:54 notebook kernel: hub.c: USB hub found
Mar 5 02:28:55 notebook kernel: hub.c: 4 ports detected
Mar 5 02:28:55 notebook kernel: hub.c: USB new device connect on bus1/1/1, assigned
device number 4
Mar 5 02:28:55 notebook kernel: usb.c: USB device 4 (vend/prod 0x5ac/0x204) is not
claimed by any active driver.
Mar 5 02:28:55 notebook kernel: hub.c: USB new device connect on bus1/1/2, assigned
device number 5
Mar 5 02:28:55 notebook kernel: usb.c: USB device 5 (vend/prod 0x46d/0xc00b) is not
claimed by any active driver.
Mar 5 02:29:10 notebook kernel: Initializing USB Mass Storage driver...
Mar 5 02:29:10 notebook kernel: usb.c: registered new driver usb-storage
Mar 5 02:29:10 notebook kernel: USB Mass Storage support registered.
Mar 5 02:29:47 notebook kernel: hub.c: USB new device connect on bus1/2/3, assigned
device number 6
Mar 5 02:29:47 notebook kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Mar 5 02:29:47 notebook kernel: Vendor: MITSUMI Model: USB FDD Rev:
1033
Mar 5 02:29:47 notebook kernel: Type: Direct-Access ANSI
SCSI revision: 02
Mar 5 02:29:47 notebook kernel: Detected scsi removable disk sda at scsi0, channel 0,
id 0, lun 0
--------------------------------------------------------------------------------
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
