Hello, I recently purchased a PS to PC USB converter in hopes that I could
get it working under linux and use my playstation controllers with games and
such. I have submitted the vendor/product ids to be added to the list and
now want to start hacking however I need some guidance. (Of course if there
is a document that I should read that will answer my questions please feel
free to tell me to RTFM but please include which one.)
The device reports its self as a HID device in usbview and other wise does
not have much info. Here is the section from /proc/bus/usb/devices:
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=6666 ProdID=0667 Rev= 2.88
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl= 10ms
So my first question is how do I get it so that it is recognized as a
joystick so if by some dumb luck it just works I will be set. If that fails
then I will send a second email asking what should I read to get me started
on a driver for the device.
I am not on the list so please include me in the reply.
Thanks.
--Bill
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
