On Wed, May 29, 2002 at 12:53:33PM -0700, David Brownell wrote: > Tom Rini wrote: > >Hello. I'm having a problem with 2.5.18, OHCI-HCD and the ACM driver on > >PPC. > >Right now my Elsa Microlink 56k modem isn't recognized again after it's > >unplugged and replugged. Here's the log from dmesg (with > >CONFIG_USB_DEBUG=y), with comments: > > I'll have a look at it. Two things struck me as a bit odd about your > dmesg output (edited here), neither of which is supposed to happen: > > >usb.c: USB disconnect on device 2 > ># Disconnect mouse > >hcd.c: (no bus?): hcd_unlink_urb fail -22 > > happened the first time, not the second time.
Keep in mind the mouse was only unplugged once. > >usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0 > >ohci-q.c: urb c393acc0 TD 2 of 3, patch ED > >ohci-q.c: urb c393acc0 TD 1 CC 5, len=0 > >hcd.c: giveback urb c393acc0 status -110 len 0 > >usb.c: error getting string descriptor 0 (error=-110) > > Happened the second time, not the first time. > > Could you forward me (not necessarily on-list) the dmesg > bits relating to the "ohci-hcd" driver starting up? Sent along privately. -- Tom Rini (TR1265) http://gate.crashing.org/~trini/ _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
