Hello!
I have a noname enclosure for 2.5" HD with USB 1.1 interface. There is a chip
ScanLogic SL11R-IDE inside. It doesn't work under Linux, it works in windows.
Orginal usb id was: 0x04ce/0x0002/0x0260
I found a recomandation to update firmware. I did it, device is now:
0x04ce/0x0002/0x026c
It is a little better now, Linux is more friendly to the device, but it is
still not OK.
There is only one big FAT partition on my disk, about20GB. But under Linux,
fdisk show me this:
#fdisk -l /dev/sda:
Disk /dev/sda: 64 heads, 32 sectors, 19077 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ? 937477 1203315 272218546+ 20 Unknown
Partition 1 does not end on cylinder boundary:
phys=(357, 116, 40) should be (357, 63, 32)
/dev/sda2 ? 649505 912677 269488144 6b Unknown
Partition 2 does not end on cylinder boundary:
phys=(269, 101, 57) should be (269, 63, 32)
/dev/sda3 ? 263179 945973 699181456 53 OnTrack DM6 Aux3
Partition 3 does not end on cylinder boundary:
phys=(324, 77, 19) should be (324, 63, 32)
/dev/sda4 * 680971 680981 10668+ 49 Unknown
Partition 4 does not end on cylinder boundary:
phys=(335, 78, 2) should be (335, 63, 32)
Partition table entries are not in disk order
lsusb output is here:
Bus 001 Device 006: ID 04ce:0002 ScanLogic Corp. SL11R-IDE IDE Bridge
cannot get string descriptor 1, error = Invalid or incomplete multibyte or
wide
character(84)
cannot get string descriptor 1, error = Invalid or incomplete multibyte or
wide
character(84)
cannot get string descriptor 2, error = Invalid or incomplete multibyte or
wide
character(84)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04ce ScanLogic Corp.
idProduct 0x0002 SL11R-IDE IDE Bridge
bcdDevice 2.6c
iManufacturer 1
iProduct 1
iSerial 2
bNumConfigurations 1
cannot get config descriptor 0, Invalid or incomplete multibyte or wide
character (84)
Language IDs: none (cannot get min. string descriptor; got len=-1,
error=84:Invalid or incomplete multibyte or wide character)
Can anyone help me to solve this problem??
Thanks for your help!
Petr
---------------------------------
Petr Slansky, [EMAIL PROTECTED]
---------------------------------
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=osdntextlink
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
