On Mon, 10 Jun 2002 18:25, navinb wrote: > can I connect a host to slave by a usb cable(high speed) both side > terminted by series A (flat one) connector, It will physically work as long as you really have a host and a device (there is nothing special about the connectors), but is an illegal configuration according to the USB spec.
> since i an running through a special case two identical > boards(mpc823) one running host and another slave image > both have USB port series A receptable where as , > normally a slave (usb devices) have series B connector. You should make sure that you either implement the B connector before you ship the product. Brad -- http://conf.linux.org.au. 22-25Jan2003. Perth, Australia. Birds in Black. _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas - http://devcon.sprintpcs.com/adp/index.cfm?source=osdntextlink _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
