Hi I want to use EHCI-HCD driver for my NEC USB 2.0 PCI card. I chose to use 2.5.12 kernel( I was using 2.4.2) but when I boots 2.5.12 gets stuck at Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled Jun 29 17:17:38 shino_korah kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Jun 29 17:17:38 shino_korah kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
After this nothing happens. My keyboard is frozen too. Am I using a wrong kernel? I have ps/2 mouse.Nothing is connected to my USB 1.1 or my USB 2.0 ports. Any suggestions on which kernel to use or..how I can fix this. Thanks in advance Shino --- "Kristofer T. Karas" <[EMAIL PROTECTED]> wrote: > On Fri, 2002-06-28 at 17:37, shino korah wrote: > > I have a PCI card with USB 2.0 controller from > NEC. > > it has only windows driver. I'm trying to write a > > driver for this. > > Just to reiterate what Stephen Gowdy mentioned, the > NEC controller chip > is supported by the EHCI-HCD driver, enabled by the > CONFIG_USB_EHCI_HCD > define in your ".config" file. If you've tried that > driver, and it > fails to bind to the NEC hardware, it could be > because the PCI > vendor:device numbers are not listed, in which case > updating those may > let the driver identify your board as one it > handles. > > HTH, > Kris > > __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek No, I will not fix your computer. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
