I implemented a Cypress SL811HS Host Controller into linux-2.4.18-rmk7 for a custom board based on SA1110.
I have enabled Keyboard and Mouse and iPaq USB support I have attached an USB keyboard I have the following messages from my linux box. My questions are: 1) -- At the end I see some errors, and I wonder what do they mean ??? 2) -- How can I verify if the keyboard is seen by the linux system ? usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=2 (error=-110) hub.c: USB new device connect on bus1/1, assigned device number 3 usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=3 (error=-110) Please help TIA ----------- Proper ARM zImage ID found. Booting... Uncompressing Linux......................................................... don e, booting the kernel. Linux version 2.4.18-rmk7 (gcc version 2.95.3 20010315 (relea se)) #15 sab nov 2 15:31:05 CET 2002 CPU: Intel StrongARM-1110 revision 8 Machine: arm-linux-kernel Warning: bad configuration page, trying to continue Security risk: creating user accessible mapping for 0x18000000 at 0xf0000000 On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttySA0 root=1f03 rw Console: colour dummy device 80x30 Calibrating delay loop... 88.26 BogoMIPS Memory: 16MB = 16MB total Memory: 14196KB available (1526K code, 296K data, 68K init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket CPU clock: 132.700 MHz (59.000-287.000 MHz) SA1100 USB Controller Core Initialized get_random_bytes called before random driver initialization usbctl: Opened for usb-eth usbctl: Started for usb-eth USB Function Character Driver Interface - 0.4, (C) 2001, Extenex Corp. Starting kswapd JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. ttySA0 at MEM 0x80050000 (irq = 17) is a SA1100 ttySA1 at MEM 0x80010000 (irq = 15) is a SA1100 Console: switching to colour frame buffer device 80x30 fb0: s1d13xxx frame buffer device Display 640 x 480 8Bpp pty: 256 Unix98 ptys configured SA1100 Real Time Clock driver v1.00 block: 64 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx loop: loaded (max 8 devices) SA1100 flash: probing 16-bit flash bus Using buffer write method Using static partition definition Creating 5 MTD partitions on "SA1100 flash": 0x00000000-0x00020000 : "firmware" 0x00020000-0x00040000 : "params" 0x00040000-0x00140000 : "kernel" 0x00140000-0x00fe0000 : "rootdisk" 0x00fe0000-0x01000000 : "homedisk" Linux Kernel Card Services 3.1.22 options: none SA-1100 PCMCIA (CS release 3.1.22) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: new USB bus registered, assigned bus number 1 hc_sl811.c: USB SL811 at f0000000, addr2 = f0010000, IRQ 41 Product: USB SL811HS Root Hub SerialNumber: 0 hub.c: USB hub found hub.c: 1 port detected usb.c: registered new driver usb_mouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver keyboard usbkbd.c: :USB HID Boot Protocol keyboard driver usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 usbserial.c: USB Serial support registered for Compaq iPAQ ipaq.c: USB Compaq iPAQ driver v0.1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com FAT: bogus logical sector size 381 UMSDOS: msdos_read_super failed, mount aborted. FAT: bogus logical sector size 381 FAT: bogus logical sector size 381 hub.c: USB new device connect on bus1/1, assigned device number 2 VFS: Mounted root (jffs2 filesystem). Freeing init memory: 68K INIT: version 2.78 booting Configuring dynamic linker... usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=2 (error=-110) hub.c: USB new device connect on bus1/1, assigned device number 3 usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=3 (error=-110) Done. INIT: Entering runlevel: 3 login: ----------- ------------------------------------------------------- This sf.net email is sponsored by: See the NEW Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0001en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel