Hi,
Greg suggested to post this problem at this mailing list. Following my
problem in REPORTING-BUGS format (as well as i can).
[2.] I have a problem with my usb PCI add in card. Everytime i connect a
USB-Device (Fritz!X USB from AVM with changed Device-Adress in
Sourcecode (changed from 0x2000 to 0x2800), because this device is
delivered by an provider - 1&1 - www.einsundeins.de) i get the error
"device not accepting new address". Looking at
your FAQ i found help, but this help depends that the interrupt doesn�t
increase for each connection. But in my case the interrupt counts are
increased.
[3.] modules, usb, capi, avm,
[4.] Linux version 2.4.18-4GB ([EMAIL PROTECTED]) (gcc version 2.95.3
20010315 (SuSE)) #1 Wed Mar 27 13:56:33 UTC 2002
[5.] Sorry, Oops-Message not available, but here the output of
/var/log/messages:
Dec 3 19:15:08 linuxNeu kernel: hub.c: USB new device connect on
bus1/2,
assigned device number 8
Dec 3 19:15:08 linuxNeu kernel: usb.c: USB device not accepting new
address=8 (error=-110)
Dec 3 19:15:08 linuxNeu kernel: hub.c: USB new device connect on
bus1/2,
assigned device number 9
Dec 3 19:15:08 linuxNeu kernel: usb.c: USB device not accepting new
address=9 (error=-110)
Dec 3 19:15:14 linuxNeu kernel: hub.c: USB new device connect on
bus1/1,
assigned device number 10
Dec 3 19:15:14 linuxNeu kernel: usb.c: USB device not accepting new
address=10 (error=-110)
Dec 3 19:15:14 linuxNeu kernel: hub.c: USB new device connect on
bus1/1,
assigned device number 11
Dec 3 19:15:14 linuxNeu kernel: usb.c: USB device not accepting new
address=11 (error=-110)
[6.] not possible
[7.1.] ver_linux:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux linux 2.4.18-4GB #1 Wed Mar 27 13:56:33 UTC 2002 i586 unknown
Gnu C 2.95.3
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.12
e2fsprogs 1.26
PPP 2.4.1
isdn4k-utils 3.1pre4
Linux C Library x 1 root root 1394238 Mar 23 2002
/lib/libc.so.6
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0
Modules Loaded fxusb hid acm snd-mixer-oss snd-pcm-oss nfsd
parport_pc lp parport snd-sb16 snd-sb16-dsp snd-pcm snd-sb16-csp
snd-sb-common snd-opl3-lib snd-hwdep snd-timer snd-mpu401-uart
snd-rawmidi
snd-seq-device snd ipv6 soundcore isa-pnp joydev evdev input usb-ohci
usbcore 8139too mii ipt_REJECT ipt_LOG iptable_nat ip_conntrack
iptable_filter ip_tables capi capifs kernelcapi capiutil reiserfs
[7.2.] processor : 0
vendor_id : CyrixInstead
cpu family : 5
model : 2
model name : 6x86 2x Core/Bus Clock
stepping : 7
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu cyrix_arr
bogomips : 133.12
[7.3.] Module information:
fxusb 560856 0
hid 18976 0 (unused)
acm 5056 0 (unused)
snd-mixer-oss 11584 0 (autoclean)
snd-pcm-oss 45792 0 (autoclean)
nfsd 65344 4 (autoclean)
parport_pc 25224 1 (autoclean)
lp 6400 0 (autoclean)
parport 21664 1 (autoclean) [parport_pc lp]
snd-sb16 4520 0
snd-sb16-dsp 6816 0 [snd-sb16]
snd-pcm 59680 0 [snd-pcm-oss snd-sb16-dsp]
snd-sb16-csp 17504 0 [snd-sb16]
snd-sb-common 7208 0 [snd-sb16 snd-sb16-dsp snd-sb16-csp]
snd-opl3-lib 6784 0 [snd-sb16]
snd-hwdep 4896 0 [snd-sb16-csp snd-opl3-lib]
snd-timer 12320 0 [snd-pcm snd-opl3-lib]
snd-mpu401-uart 3472 0 [snd-sb16 snd-sb16-dsp]
snd-rawmidi 14080 0 [snd-mpu401-uart]
snd-seq-device 4336 0 [snd-opl3-lib snd-rawmidi]
snd 32776 0 [snd-mixer-oss snd-pcm-oss snd-sb16
snd-sb16-dsp snd-pcm snd-sb16-csp snd-sb-common snd-opl3-lib snd-hwdep
snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
ipv6 123680 -1 (autoclean)
soundcore 3236 6 [snd]
isa-pnp 27432 0 [snd-sb16]
joydev 7232 0 (unused)
evdev 4544 0 (unused)
input 3072 0 [hid joydev evdev]
usb-ohci 18528 0 (unused)
usbcore 55456 1 [fxusb hid acm usb-ohci]
8139too 14400 1
mii 1008 0 [8139too]
ipt_REJECT 2752 1 (autoclean)
ipt_LOG 3136 1 (autoclean)
iptable_nat 12660 0 (autoclean) (unused)
ip_conntrack 12716 1 (autoclean) [iptable_nat]
iptable_filter 1728 1 (autoclean)
ip_tables 10432 6 [ipt_REJECT ipt_LOG iptable_nat
iptable_filter]
capi 16768 0
capifs 3520 1 [capi]
kernelcapi 29440 2 [fxusb capi]
capiutil 22400 0 [kernelcapi]
reiserfs 155712 2
[7.4.] ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0220-022f : SoundBlaster
02f8-02ff : serial(auto)
0330-0331 : MPU401 UART
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
0388-0389 : OPL2/3 (left)
038a-038b : OPL2/3 (right)
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
3000-300f : PCI device 8086:7010
3000-3007 : ide0
3008-300f : ide1
6100-61ff : PCI device 10ec:8139
6100-61ff : 8139too
6200-62ff : PCI device 1002:4754
iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-05ffffff : System RAM
00100000-0025c637 : Kernel code
0025c638-002c28eb : Kernel data
e0000000-e0ffffff : PCI device 1002:4754
e0000000-e01fffff : vesafb
e1000000-e10000ff : PCI device 10ec:8139
e1000000-e10000ff : 8139too
e1001000-e1001fff : PCI device 1045:c861
e1001000-e1001fff : usb-ohci
ffff0000-ffffffff : reserved
[7.5.] PCI:
00:00.0 Host bridge: Intel Corp. 430VX - 82437VX TVX [Triton VX] (rev
01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32
00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II]
(rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at 3000 [size=16]
00:0b.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
Subsystem: OPTi Inc. 82C861
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e1001000 (32-bit, non-prefetchable) [size=4K]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev
10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 6100 [size=256]
Region 1: Memory at e1000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II
215GT
[Mach64 GT] (rev 48) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 6200 [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
[7.6.] not available
[7.7.] other information
I�m using a 2 port usb PCI card from Trust (www.trust.com)
here the output of lsmod:
Module Size Used by Tainted: P
fxusb 560856 0
hid 18976 0 (unused)
acm 5056 0 (unused)
snd-mixer-oss 11584 0 (autoclean)
snd-pcm-oss 45792 0 (autoclean)
nfsd 65344 4 (autoclean)
parport_pc 25224 1 (autoclean)
lp 6400 0 (autoclean)
parport 21664 1 (autoclean) [parport_pc lp]
snd-sb16 4520 0
snd-sb16-dsp 6816 0 [snd-sb16]
snd-pcm 59680 0 [snd-pcm-oss snd-sb16-dsp]
snd-sb16-csp 17504 0 [snd-sb16]
snd-sb-common 7208 0 [snd-sb16 snd-sb16-dsp snd-sb16-csp]
snd-opl3-lib 6784 0 [snd-sb16]
snd-hwdep 4896 0 [snd-sb16-csp snd-opl3-lib]
snd-timer 12320 0 [snd-pcm snd-opl3-lib]
snd-mpu401-uart 3472 0 [snd-sb16 snd-sb16-dsp]
snd-rawmidi 14080 0 [snd-mpu401-uart]
snd-seq-device 4336 0 [snd-opl3-lib snd-rawmidi]
snd 32776 0 [snd-mixer-oss snd-pcm-oss snd-sb16
snd-sb16-dsp snd-pcm snd-sb16-csp snd-sb-common snd-opl3-lib snd-hwdep
snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
ipv6 123680 -1 (autoclean)
soundcore 3236 6 [snd]
isa-pnp 27432 0 [snd-sb16]
joydev 7232 0 (unused)
evdev 4544 0 (unused)
input 3072 0 [hid joydev evdev]
usb-ohci 18528 0 (unused)
usbcore 55456 1 [fxusb hid acm usb-ohci]
8139too 14400 1
mii 1008 0 [8139too]
ipt_REJECT 2752 1 (autoclean)
ipt_LOG 3136 1 (autoclean)
iptable_nat 12660 0 (autoclean) (unused)
ip_conntrack 12716 1 (autoclean) [iptable_nat]
iptable_filter 1728 1 (autoclean)
ip_tables 10432 6 [ipt_REJECT ipt_LOG iptable_nat
iptable_filter]
capi 16768 0
capifs 3520 1 [capi]
kernelcapi 29440 2 [fxusb capi]
capiutil 22400 0 [kernelcapi]
reiserfs 155712 2
here the output of interrupts:
CPU0
0: 742033 XT-PIC timer
1: 3429 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 790 XT-PIC SoundBlaster
8: 2 XT-PIC rtc
10: 167 XT-PIC usb-ohci
11: 8031 XT-PIC eth0
13: 0 XT-PIC fpu
14: 51100 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
ERR: 0
THANKS a lot for your help
Holger Seibold
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
