Hi, This patch prints the vendor + product ids of the scanner after it has been successfully detected.
Also the annoying error message about "Scanner device is already open" was downgraded to a dbg. Scanning for devices while one scanner device was open produced several 100 error messages in syslog. Bye, Henning --- linux-2.4.21-pre3.maintainer2/drivers/usb/scanner.c 2003-01-17 13:48:16.000000000 +0100 +++ linux-2.4.21-pre3.syslog/drivers/usb/scanner.c 2003-01-17 22:54:50.000000000 ++0100 @@ -343,6 +343,8 @@ * - Move the scanner ioctls to usb_scanner_ioctl.h to allow access by archs * that need it (by Greg KH). * - New maintainer: Henning Meier-Geinitz. + * - Print ids and device number when a device was detected. + * - Don't print errors when the device is busy. * * TODO * - Performance @@ -456,7 +458,7 @@ } if (scn->isopen) { - err("open_scanner(%d): Scanner device is already open", scn_minor); + dbg("open_scanner(%d): Scanner device is already open", scn_minor); err = -EBUSY; goto out_error; } @@ -1047,6 +1049,8 @@ if (scn->devfs == NULL) dbg("scanner%d: device node registration failed", scn_minor); + info ("USB scanner device (0x%04x/0x%04x) now attached to %s", + dev->descriptor.idVendor, dev->descriptor.idProduct, name); p_scn_table[scn_minor] = scn; up(&scn_mutex); ------------------------------------------------------- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel