What we do within the Windows demo, after the device descriptors are
changed, is:
"GetDescriptor" (we see the new one). "UnconfigureDevice" (This sends a
request "SetConfiguration = 0", but we don't know if it tells the host
controller anything else). Then "SetConfiguration = 1" and "SetInterface =
0 / AlternateSetting = 1".
So, only standard USB protocol on-the-wire.


We are stuck into this point where the demo driver sends
"UnconfigureDevice". ..

IMHO "UnconfigureDevice", which I believe we discussed, but Linux does
not implement, means that a device must expose no interface, only EP0.

The "SET_CONFIGURATION 0" is part of the USB spec ... just implement
it correctly in your USB "gadget" firmware, by disabling all endpoints.

Calling it "UnconfigureDevice" is just confusing. :)







-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to