> > Hi Oliver
> >
> > It's much better, now I can transmit some hello's, but after cat'ing the
> > LVM_HOWTO to /dev/ttyUSB0 it crashed again, about after transmitting 3 or
> > 4 kBytes.
> > Because I was in X i didn't see the oops. Shall i crash it again and send
> > the oops ?
>
> Hi,
>
> could you please make a diff of the change and send it to [EMAIL PROTECTED]
> and [EMAIL PROTECTED]
Hello,
Here is the patch (the line that Oliver told me to add):
--- linux-2.4.20/drivers/usb/serial/ftdi_sio.c Fri Nov 29 00:53:14 2002
+++ linux-2.4.20-w4l/drivers/usb/serial/ftdi_sio.c Wed Feb 12 21:10:31 2003
@@ -482,6 +482,7 @@
priv->custom_divisor = 0;
priv->write_offset = 1;
priv->prev_status = priv->diff_status = 0;
+ init_waitqueue_head( &priv->delta_msr_wait );
/* This will push the characters through immediately rather
than queue a task to deliver them */
priv->flags = ASYNC_LOW_LATENCY;
> Then yes please crash the box again and send the oops to [EMAIL PROTECTED],
> [EMAIL PROTECTED], the list and me.
And the oops after applying the patch.
Again i entered the following commands
(with nullmodem cable ttyS0 <-> ttyUSB0):
> cat /dev/ttyS0 &
> cat /usr/src/linux/Documentation/LVM-HOWTO > /dev/ttyUSB0
(this time with readonly filesystems ;-)
Thanks for your help.
Tinu
ksymoops 2.4.6 on i686 2.4.20-w4l. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.20-w4l/ (default)
-m /boot/System.map-2.4.20-w4l (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Warning (compare_ksyms_lsmod): module Mvnetint is in lsmod but not in ksyms, probably
no symbols exported
Warning (map_ksym_to_module): cannot match loaded module Mvnetd to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mvnet to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mvw to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mvmouse to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mvkbd to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mvgic to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mvdsp to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mserial to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mmpip to a unique module
object. Trace may not be reliable.
Warning (map_ksym_to_module): cannot match loaded module Mmerge to a unique module
object. Trace may not be reliable.
Warning (compare_maps): mismatch on symbol __nvsym03120 , NVdriver says e09762e0,
/lib/modules/2.4.20-w4l/kernel/drivers/video/NVdriver says e089c000. Ignoring
/lib/modules/2.4.20-w4l/kernel/drivers/video/NVdriver entry
kernel BUG at sched.c:567!
invalid operand: 0000
CPU: 0
EIP: 1010:[<c01154f9>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000018 ebx: dd715478 ecx: c0268000 edx: 00000000
esi: c0269da4 edi: c0268000 ebp: c0269d90 esp: c0269d6c
ds: 1018 es: 1018 ss: 1018
Process swapper (pid: 0, stackpage=c0269000)
Stack: c0200fde dd715478 c0269da4 c0268000 dd71541c dd637a88 00000000 c0268000
dd715478 00000001 c0106add dd71541c dd715400 ffffffea 00000001 c0268000
dd715484 dd715484 c0106c28 dd715478 dd715400 00000000 e089422d 0000000d
Call Trace: [<c0106add>] [<c0106c28>] [<e089422d>] [<c0180fba>] [<c01821f3>]
[<c0182975>] [<c01b9746>] [<c0180d3f>] [<c0180dd4>] [<e0899025>] [<e088daaa>]
[<e088db5a>] [<e088dcb0>] [<c0108fad>] [<c0109116>] [<c01062a0>] [<c01062a0>]
[<c010b258>] [<c01062a0>] [<c01062a0>] [<c01062c3>] [<c0106329>] [<c01060a7>]
Code: 0f 0b 37 02 d6 0f 20 c0 83 c4 04 8b 4d f4 c1 e1 07 81 c1 80
>>EIP; c01154f9 <schedule+4d/324> <=====
>>ebx; dd715478 <_end+1d465ecc/20568a54>
>>ecx; c0268000 <init_task_union+0/2000>
>>esi; c0269da4 <init_task_union+1da4/2000>
>>edi; c0268000 <init_task_union+0/2000>
>>ebp; c0269d90 <init_task_union+1d90/2000>
>>esp; c0269d6c <init_task_union+1d6c/2000>
Trace; c0106add <__down+55/9c>
Trace; c0106c28 <__down_failed+8/c>
Trace; e089422d <[usbserial].text.lock.usbserial+2d/df>
Trace; c0180fba <tty_default_put_char+1e/24>
Trace; c01821f3 <n_tty_receive_buf+71f/edc>
Trace; c0182975 <n_tty_receive_buf+ea1/edc>
Trace; c01b9746 <pci_pool_free+16/e0>
Trace; c0180d3f <flush_to_ldisc+db/e4>
Trace; c0180dd4 <tty_flip_buffer_push+14/5c>
Trace; e0899025 <[ftdi_sio]ftdi_read_bulk_callback+2a9/324>
Trace; e088daaa <[uhci]uhci_call_completion+132/1b0>
Trace; e088db5a <[uhci]uhci_finish_completion+32/4c>
Trace; e088dcb0 <[uhci]uhci_interrupt+b0/c4>
Trace; c0108fad <handle_IRQ_event+31/5c>
Trace; c0109116 <do_IRQ+6a/a8>
Trace; c01062a0 <default_idle+0/28>
Trace; c01062a0 <default_idle+0/28>
Trace; c010b258 <call_do_IRQ+5/d>
Trace; c01062a0 <default_idle+0/28>
Trace; c01062a0 <default_idle+0/28>
Trace; c01062c3 <default_idle+23/28>
Trace; c0106329 <cpu_idle+41/54>
Trace; c01060a7 <rest_init+27/28>
Code; c01154f9 <schedule+4d/324>
00000000 <_EIP>:
Code; c01154f9 <schedule+4d/324> <=====
0: 0f 0b ud2a <=====
Code; c01154fb <schedule+4f/324>
2: 37 aaa
Code; c01154fc <schedule+50/324>
3: 02 d6 add %dh,%dl
Code; c01154fe <schedule+52/324>
5: 0f 20 c0 mov %cr0,%eax
Code; c0115501 <schedule+55/324>
8: 83 c4 04 add $0x4,%esp
Code; c0115504 <schedule+58/324>
b: 8b 4d f4 mov 0xfffffff4(%ebp),%ecx
Code; c0115507 <schedule+5b/324>
e: c1 e1 07 shl $0x7,%ecx
Code; c011550a <schedule+5e/324>
11: 81 c1 80 00 00 00 add $0x80,%ecx
<0>Kernel panic: Aiee, killing interrupt handler!
13 warnings issued. Results may not be reliable.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel