Thank you to all of you for your helpful replies. We managed to get the device enumerating yesterday. It turns out that we were compiling the Verilog for the USB1.1 core with an option that was optimizing away the internal state machine. As such, it was getting stuck in the initial "idle" state and was very confused. A recompile with the default option occupies much more space on the FPGA, but now enumerates successfully.

To clarify, I was incorrect about my notes: The trace that we saw the GET_DESCRIPTOR request was when the device was connected to a Windows machine.

Thanks again, and keep on hacking.

Evan Jones

--
Evan Jones: http://www.eng.uwaterloo.ca/~ejones/
"Computers are useless. They can only give answers" - Pablo Picasso



-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to