As long as I'm being a nusance today, I might as well put my whole problem out
on the board, and see if anyone recognize anything in the problem.


I am working with a Filter Wheel (FW) developed in house(fli-cam.com) based on
the Cypress FX UB chip.  It displays some strange behavior. If I plug the
filterwheel in, and boot into RedHat (Psyche, k. 2.4.18), proc/bus/usb/devices
lists the following for the FW:


Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=0f18 ProdID=0005 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=10ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=88(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=08(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=89(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=09(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=8a(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=0a(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
I:  If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=10ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0msIf at anypoint, I hotplug the device,
proc/bus/usb/devices lists the following for the FW:
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms
E:  Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms
E:  Ad=89(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=09(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=8a(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=0a(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms


Which is wrong, makes no sence to me, and breaks our drivers. It does the same
thing if I unplug the device at any point, and plug it back in.




If I boot into windows, then reboot into RedHat, proc/bus/usb/devices lists the
following for the FW:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=0f18 ProdID=0007 Rev= 1.00
S:  Manufacturer=Finger Lakes Instrumentation, L.L.C.
S:  Product=FLI USB Filter Wheel
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms


Which is what is expected, and works fine.

Why are the two different?  I don't see how booting into another OS would change
anything, but it does.  Our other devices using the Cypress FX chip do not have
this issue.

Does anyone have any cluse on where to start looking for a problem, or where I
should start looking to find the problem?

Thanks for all of the help.

-Jonathan McKamey


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to