ChangeSet 1.1315.8.13, 2003/09/17 12:20:18-07:00, [EMAIL PROTECTED]
[PATCH] USB: Remove modules.txt: usb serial & storage
drivers/usb/Kconfig | 12 +---
drivers/usb/serial/Kconfig | 121 ++++++++++++++------------------------------
drivers/usb/storage/Kconfig | 6 --
3 files changed, 46 insertions(+), 93 deletions(-)
diff -Nru a/drivers/usb/Kconfig b/drivers/usb/Kconfig
--- a/drivers/usb/Kconfig Fri Sep 19 17:12:53 2003
+++ b/drivers/usb/Kconfig Fri Sep 19 17:12:53 2003
@@ -33,10 +33,8 @@
It doesn't normally hurt to select them all if you are not certain.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called usbcore. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called usbcore.
source "drivers/usb/core/Kconfig"
@@ -82,10 +80,8 @@
Say Y here if you own an USS-720 USB->Parport cable and intend to
connect anything other than a printer to it.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called uss720. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called uss720.
source "drivers/usb/serial/Kconfig"
diff -Nru a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
--- a/drivers/usb/serial/Kconfig Fri Sep 19 17:12:53 2003
+++ b/drivers/usb/serial/Kconfig Fri Sep 19 17:12:53 2003
@@ -17,10 +17,8 @@
information on the specifics of the different devices that are
supported, and on how to use them.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called usbserial. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called usbserial.
config USB_SERIAL_DEBUG
bool "USB Serial Converter verbose debug"
@@ -70,10 +68,8 @@
adaptor (F5U103 is one of the model numbers) or the Peracom single
port USB to serial adapter.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called belkin_sa. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called belkin_sa.
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
@@ -82,10 +78,8 @@
Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
USB to serial converter device.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called whiteheat. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called whiteheat.
config USB_SERIAL_DIGI_ACCELEPORT
tristate "USB Digi International AccelePort USB Serial Driver"
@@ -99,11 +93,8 @@
This driver works under SMP with the usb-uhci driver. It does not
work under SMP with the uhci driver.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called digi_acceleport. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called digi_acceleport.
config USB_SERIAL_EMPEG
tristate "USB Empeg empeg-car Mark I/II Driver"
@@ -114,10 +105,8 @@
device node. See <file:Documentation/usb/usb-serial.txt> for more
tidbits of information.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called empeg. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called empeg.
config USB_SERIAL_FTDI_SIO
tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
@@ -130,10 +119,8 @@
See <http://ftdi-usb-sio.sourceforge.net/> for more
information on this driver and the device.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ftdi_sio. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called ftdi_sio.
config USB_SERIAL_VISOR
tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
@@ -144,10 +131,8 @@
<http://usbvisor.sourceforge.net/> for more information on using this
driver.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called visor. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called visor.
config USB_SERIAL_IPAQ
tristate "USB PocketPC PDA Driver"
@@ -158,10 +143,8 @@
using a USB cradle/cable. For information on using the driver,
read <file:Documentation/usb/usb-serial.txt>.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ipaq. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called ipaq.
config USB_SERIAL_IR
tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
@@ -171,10 +154,8 @@
devices. This is useful if you do not want to use the full IrDA
stack.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ir-usb. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called ir-usb.
config USB_SERIAL_EDGEPORT
tristate "USB Inside Out Edgeport Serial Driver"
@@ -199,10 +180,8 @@
Edgeport/4 DIN
Edgeport/16 Dual
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called io_edgeport. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called io_edgeport.
config USB_SERIAL_EDGEPORT_TI
tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
@@ -212,10 +191,8 @@
Networks (Digi) that are not supported by the io_edgeport driver.
This includes the Edgeport/1 device.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called io_ti. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called io_ti.
config USB_SERIAL_KEYSPAN_PDA
tristate "USB Keyspan PDA Single Port Serial Driver"
@@ -225,10 +202,8 @@
serial converter device. This driver makes use of firmware
developed from scratch by Brian Warner.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called keyspan_pda. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called keyspan_pda.
config USB_SERIAL_KEYSPAN
tristate "USB Keyspan USA-xxx Serial Driver"
@@ -241,10 +216,8 @@
See <http://misc.nu/hugh/keyspan.html> for more information.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called keyspan. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called keyspan.
config USB_SERIAL_KEYSPAN_MPR
bool "USB Keyspan MPR Firmware"
@@ -337,10 +310,8 @@
Please read <file:Documentation/usb/usb-serial.txt> for more
information.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called kl5kusb105. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called kl5kusb105.
config USB_SERIAL_KOBIL_SCT
tristate "USB KOBIL chipcard reader (EXPERIMENTAL)"
@@ -357,10 +328,8 @@
- KAAN Professional
Note that you need a current CT-API.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called kobil_sct. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called kobil_sct.
config USB_SERIAL_MCT_U232
tristate "USB MCT Single Port Serial Driver"
@@ -372,10 +341,8 @@
This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
BAY devices.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called mct_u232. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called mct_u232.
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
@@ -384,10 +351,8 @@
Say Y here if you want to use the PL2303 USB Serial single port
adapter from Prolific.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called pl2303. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called pl2303.
config USB_SERIAL_SAFE
tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
@@ -405,10 +370,8 @@
reader. This is an interface to ISO 7816 compatible contactbased
chipcards, e.g. GSM SIMs.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called cyberjack. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called cyberjack.
If unsure, say N.
@@ -420,10 +383,8 @@
serial converter device. This driver makes use of firmware
developed from scratch by Brian Warner.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called keyspan_pda. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called keyspan_pda.
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
@@ -431,10 +392,8 @@
help
Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called omninet. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called omninet.
config USB_EZUSB
bool
diff -Nru a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
--- a/drivers/usb/storage/Kconfig Fri Sep 19 17:12:53 2003
+++ b/drivers/usb/storage/Kconfig Fri Sep 19 17:12:53 2003
@@ -15,10 +15,8 @@
similar devices. This driver may also be used for some cameras and
card readers.
- This code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called usb-storage. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the
+ module will be called usb-storage.
config USB_STORAGE_DEBUG
bool "USB Mass Storage verbose debug"
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
