On Sun, Sep 14, 2003 at 01:50:08PM -0500, John Wright wrote: > > Greg, I got this wrong earlier. This is a USB HID device that follows > the HID v 1.1 > specs. It plugs in and is recognized as an HID device (lsusb gives all of > the information > for the device). I am getting a couple of errors. The read fails when a > card is swiped. > When the device loads, I get the following errors. Scott Cambell who write > his own > device for this found this problem earlier and reported it to your group. > He said > that it was a "general bug" and that you confirmed it was a bug. He wrote > his > own driver because the hid wouldn't work. The problem with his device is > that you > need to remove hid support to get the device to work. I need to know at > this point > if there are any options that I need to be aware of. Any help would be > appreciated.
I really don't know much about the hid stuff, sorry. greg k-h ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
