On Thu, Dec 11, 2003 at 07:12:08AM -0500, Gene Heskett wrote: > Can anyone tell me the state of this device vis-a-vis full duplex > operation with hardware flow control? With software xon/xoff?
Yes, it should work. What kernel version are you using? > I have one, and it seems I can type in minicom and it shows up on the > other end, or I can type from the other end and it shows up on the > minicom screen, but if I start a zmodem transfer from minicom using a > known good config on the other end, it sends the first block and > hangs, eventually exiting sz with a 'timeout on filename'. Thats > telling me that I have a duplexing problem, right? I don't know. Can you enable debugging in the driver (load with 'debug=1') and see if the line settings are getting read properly? thanks, greg k-h ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
