Re-compiled the kernel with gcc296, the kernel bug is gone. Sorry to take your time with that.
Still have the same problem with the camera (as my last message), but I noticed one new twist. When I have the memory-stick pro, mount says:
~/temp :)mount /dev/sda /mnt/camera/ -t vfat
mount: wrong fs type, bad option, bad superblock on /dev/sda,
or too many mounted file systems
When I swithc to a memory stick, I get a new line in the error:
~/temp :)mount /dev/sda /mnt/camera/ -t vfat
mount: block device /dev/sda is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sda,
or too many mounted file systemsThanks again for help/tips,
glenn
SCSI device, disk, generic compiled in kernel USB-mass-storage compiled in kernel
Here is dmesg
~/temp :)dmesg exit command received usb-storage: -- usb_stor_release_resources finished hub 2-0:1.0: new USB device on port 1, assigned address 3 usb-storage: USB Mass Storage device detected usb-storage: act_altsetting is 0, id_index is 28 usb-storage: -- associate_dev usb-storage: Vendor: Sony usb-storage: Product: DSC-S30/S70/S75/505V/F505/F707/F717/P8 usb-storage: Transport: Control/Bulk usb-storage: Protocol: Transparent SCSI usb-storage: Endpoints: In: 0xf62e3914 Out: 0xf62e3900 Int: 0xf62e3928 (Period 255) usb-storage: *** thread sleeping. scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 24 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes usb-storage: Status code 0; transferred 36/36 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. Vendor: Sony Model: Sony DSC Rev: 4.50 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10 usb-storage: Status code 0; transferred 10/10 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes usb-storage: Status code 0; transferred 8/8 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. SCSI device sda: 63424 512-byte hdwr sectors (32 MB) usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE_10 (10 bytes) usb-storage: 5a 00 3f 00 00 00 00 00 08 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10 usb-storage: Status code 0; transferred 10/10 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes usb-storage: Status code 0; transferred 8/8 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is on sda: Mode Sense: 00 00 00 80 sda: assuming drive cache: write through usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code -32; transferred 6/6 usb-storage: -- stall on control pipe usb-storage: Call to usb_stor_ctrl_transfer() returned 2 usb-storage: -- CB transport device requiring auto-sense usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x5, ASC: 0x20, ASCQ: 0x0 usb-storage: Illegal Request: Invalid command operation code usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. sda:<7>usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10 usb-storage: Status code 0; transferred 10/10 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries usb-storage: Status code 0; transferred 4096/4096 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda1 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (1:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (2:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (3:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (4:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (5:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (6:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (7:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 3 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10 usb-storage: Status code 0; transferred 10/10 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sda. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6 usb-storage: Status code 0; transferred 6/6 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. ~/temp :)
--
I want to go farther, farther!
A. E. L.
------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
