Hello,
I just acquired usb-storage enabled digital camera and I get below message on
the console when I tryed to attatch it to my computer:
==============================================================================
hub 2-2:1.0 new USB device on port 2, assigned address 3
Initializing USB device (0a17, 0006, 1000 S 05 P 01) has an unneeded SubClass
entry in unusual_devs.h
Please send a copy of this message to
<linux-usb-devel-at-lists.sourceforge-dot-net>
scsi0: SCSI emulation for USB Mass Storage devices
Vendor: Pentax Model: Optio S Rev: 1000
Type Direct-Access ANSI SCSI revision: 02
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
==============================================================================
Other usefull information:
=========================
KERNEL VERSION: 2.6.0
CAMERA SPECIFICATIONS:
---------------------
Manufacturer: Pentax
Model: Optio S4 (not exactly "Optio S" as says the message)
/proc/bus/usb/devices:
---------------------
T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a17 ProdID=0006 Rev=10.00
S: Manufacturer=PENTAX
S: Product=PENTAX OPTIO S4
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=05 Prot=01 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
COMMENTS:
========
I tryed to compile 2.6.0 to test usb storage with this camera because it
doesen't work on my PPC laptop (2.4.21-ben1 kernel) which is known to work
because I have tested it many times with others mass storage devices such as
usb pens and cameras.
Then, at first, I found patch to solve this problem on Optio S model, but I
saw that is present on later kernels and then I tryed my desktop PC whith its
already compiled 2-6.0-test5 and then (did'nt work) whith 2.6.0 final
version.
I also tryed to remove the mentioned entry in unusual_devs.h (or almost it is
that I think that I did) and recompile the modules but i get no result. The
information which I post here has got after recompilated again the modules
(which original unusual_devs.h) and rebooted the system to avoid any side
effect.
Thanks all.
On the attatchment you can see the output of the 'dmesg' command and below I
paste a portion of my /var/log/syslog. If you need any other information,
please feel free to ask me. Thanks again.
/var/log/syslog:
================
Dec 21 20:44:56 sid syslogd 1.4.1#11: restart.
Dec 21 20:44:56 sid kernel: klogd 1.4.1#11, log source = /proc/kmsg started.
Dec 21 20:44:56 sid kernel: Inspecting /boot/System.map
Dec 21 20:44:56 sid kernel: Cannot find map file.
Dec 21 20:44:56 sid kernel: No module symbols loaded - kernel modules not
enabled.
Dec 21 20:44:56 sid kernel: Linux version 2.6.0 ([EMAIL PROTECTED]) (gcc version 3.3.2
20030
908 (Debian prerelease)) #2 Sun Dec 21 17:06:42 CET 2003
Dec 21 20:44:56 sid kernel: BIOS-provided physical RAM map:
Dec 21 20:44:56 sid kernel: BIOS-e820: 0000000000000000 - 000000000009e800
(usable
)
Dec 21 20:44:56 sid kernel: BIOS-e820: 000000000009e800 - 00000000000a0000
(reserv
ed)
Dec 21 20:44:56 sid kernel: BIOS-e820: 00000000000f0000 - 0000000000100000
(reserv
ed)
Dec 21 20:44:56 sid kernel: BIOS-e820: 0000000000100000 - 000000000ffec000
(usable
)
Dec 21 20:44:56 sid kernel: BIOS-e820: 000000000ffec000 - 000000000ffef000
(ACPI d
ata)
Dec 21 20:44:56 sid kernel: BIOS-e820: 000000000ffef000 - 000000000ffff000
(reserv
ed)
Dec 21 20:44:56 sid kernel: BIOS-e820: 000000000ffff000 - 0000000010000000
(ACPI N
VS)
Dec 21 20:44:56 sid kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserv
ed)
Dec 21 20:44:56 sid kernel: 255MB LOWMEM available.
Dec 21 20:44:56 sid kernel: On node 0 totalpages: 65516
Dec 21 20:44:56 sid kernel: DMA zone: 4096 pages, LIFO batch:1
Dec 21 20:44:56 sid kernel: Normal zone: 61420 pages, LIFO batch:14
Dec 21 20:44:56 sid kernel: HighMem zone: 0 pages, LIFO batch:1
Dec 21 20:44:56 sid kernel: DMI 2.3 present.
Dec 21 20:44:56 sid kernel: ACPI disabled because your bios is from 2000 and
too ol
d
Dec 21 20:44:56 sid kernel: You can enable it with acpi=force
Dec 21 20:44:56 sid kernel: ACPI: RSDP (v000 ASUS
) @ 0x000f6750
Dec 21 20:44:56 sid kernel: ACPI: RSDT (v001 ASUS A7V 0x30303031 MSFT
0x3131
3031) @ 0x0ffec000
Dec 21 20:44:56 sid kernel: ACPI: FADT (v001 ASUS A7V 0x30303031 MSFT
0x3131
3031) @ 0x0ffec080
Dec 21 20:44:56 sid kernel: ACPI: BOOT (v001 ASUS A7V 0x30303031 MSFT
0x3131
3031) @ 0x0ffec040
Dec 21 20:44:56 sid kernel: ACPI: DSDT (v001 ASUS A7V 0x00001000 MSFT
0x0100
000b) @ 0x00000000
Dec 21 20:44:56 sid kernel: Building zonelist for node : 0
Dec 21 20:44:56 sid kernel: Kernel command line: root=/dev/hde2
Dec 21 20:44:56 sid kernel: Local APIC disabled by BIOS -- reenabling.
Dec 21 20:44:56 sid kernel: Found and enabled local APIC!
Dec 21 20:44:56 sid kernel: Initializing CPU#0
Dec 21 20:44:56 sid kernel: PID hash table entries: 1024 (order 10: 8192
bytes)
Dec 21 20:44:56 sid kernel: Detected 908.606 MHz processor.
Dec 21 20:44:56 sid kernel: Console: colour VGA+ 80x25
Dec 21 20:44:56 sid kernel: Memory: 256044k/262064k available (1645k kernel
code, 5
304k reserved, 707k data, 136k init, 0k highmem)
Dec 21 20:44:56 sid kernel: Calibrating delay loop... 1785.85 BogoMIPS
Dec 21 20:44:56 sid kernel: Dentry cache hash table entries: 32768 (order: 5,
13107
2 bytes)
Dec 21 20:44:56 sid kernel: Inode-cache hash table entries: 16384 (order: 4,
65536
bytes)
Dec 21 20:44:56 sid kernel: Mount-cache hash table entries: 512 (order: 0,
4096 byt
es)
Dec 21 20:44:56 sid kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
(64 b
ytes/line)
Dec 21 20:44:56 sid kernel: CPU: L2 Cache: 256K (64 bytes/line)
Dec 21 20:44:56 sid kernel: Intel machine check architecture supported.
Dec 21 20:44:56 sid kernel: Intel machine check reporting enabled on CPU#0.
Dec 21 20:44:56 sid kernel: CPU: AMD Athlon(tm) Processor stepping 02
Dec 21 20:44:56 sid kernel: Enabling fast FPU save and restore... done.
Dec 21 20:44:56 sid kernel: Checking 'hlt' instruction... OK.
Dec 21 20:44:56 sid kernel: POSIX conformance testing by UNIFIX
Dec 21 20:44:56 sid kernel: enabled ExtINT on CPU#0
Dec 21 20:44:56 sid kernel: ESR value before enabling vector: 00000000
Dec 21 20:44:56 sid kernel: ESR value after enabling vector: 00000000
Dec 21 20:44:56 sid kernel: Using local APIC timer interrupts.
Dec 21 20:44:56 sid kernel: calibrating APIC timer ...
Dec 21 20:44:56 sid kernel: ..... CPU clock speed is 907.0964 MHz.
Dec 21 20:44:56 sid kernel: ..... host bus clock speed is 201.0769 MHz.
Dec 21 20:44:56 sid kernel: NET: Registered protocol family 16
Dec 21 20:44:56 sid kernel: PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last
bus=
1
Dec 21 20:44:56 sid kernel: PCI: Using configuration type 1
Dec 21 20:44:56 sid kernel: mtrr: v2.0 (20020519)
Dec 21 20:44:56 sid kernel: ACPI: Subsystem revision 20031002
Dec 21 20:44:56 sid kernel: ACPI: Interpreter disabled.
Dec 21 20:44:56 sid kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Dec 21 20:44:56 sid kernel: ACPI: ACPI tables contain no PCI IRQ routing
entries
Dec 21 20:44:56 sid kernel: PCI: Invalid ACPI-PCI IRQ routing table
Dec 21 20:44:56 sid kernel: PCI: Probing PCI hardware
Dec 21 20:44:56 sid kernel: PCI: Probing PCI hardware (bus 00)
Dec 21 20:44:56 sid kernel: Disabling VIA memory write queue (PCI ID 0305, rev
02):
[55] 81 & 1f -> 01
Dec 21 20:44:56 sid kernel: PCI: Using IRQ router VIA [1106/0686] at
0000:00:04.0
Dec 21 20:44:56 sid kernel: spurious 8259A interrupt: IRQ7.
Dec 21 20:44:56 sid kernel: SBF: Simple Boot Flag extension found and enabled.
Dec 21 20:44:56 sid kernel: SBF: Setting boot flags 0x80
Dec 21 20:44:56 sid kernel: Machine check exception polling timer started.
Dec 21 20:44:56 sid kernel: ikconfig 0.7 with /proc/config*
Dec 21 20:44:56 sid kernel: VFS: Disk quotas dquot_6.5.1
Dec 21 20:44:56 sid kernel: Initializing Cryptographic API
Dec 21 20:44:56 sid kernel: PCI: Disabling Via external APIC routing
Dec 21 20:44:56 sid kernel: pty: 256 Unix98 ptys configured
Dec 21 20:44:56 sid kernel: Real Time Clock Driver v1.12
Dec 21 20:44:56 sid kernel: Linux agpgart interface v0.100 (c) Dave Jones
Dec 21 20:44:56 sid kernel: Using anticipatory io scheduler
Dec 21 20:44:56 sid kernel: Floppy drive(s): fd0 is 1.44M
Dec 21 20:44:56 sid kernel: FDC 0 is a post-1991 82077
Dec 21 20:44:56 sid kernel: pcnet32.c:v1.27b 01.10.2002
[EMAIL PROTECTED]
Dec 21 20:44:56 sid kernel: 8139too Fast Ethernet driver 0.9.26
Dec 21 20:44:56 sid kernel: PCI: Found IRQ 10 for device 0000:00:0b.0
Dec 21 20:44:56 sid kernel: PCI: Sharing IRQ 10 with 0000:00:11.0
Dec 21 20:44:56 sid kernel: eth0: RealTek RTL8139 at 0xd080d000,
00:40:95:30:39:3f,
IRQ 10
Dec 21 20:44:56 sid kernel: Uniform Multi-Platform E-IDE driver Revision:
7.00alpha
2
Dec 21 20:44:56 sid kernel: ide: Assuming 33MHz system bus speed for PIO
modes; ove
rride with idebus=xx
Dec 21 20:44:56 sid kernel: VP_IDE: IDE controller at PCI slot 0000:00:04.1
Dec 21 20:44:56 sid kernel: VP_IDE: chipset revision 16
Dec 21 20:44:56 sid kernel: VP_IDE: not 100%% native mode: will probe irqs
later
Dec 21 20:44:56 sid kernel: ide: Assuming 33MHz system bus speed for PIO
modes; ove
rride with idebus=xx
Dec 21 20:44:56 sid kernel: VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66
controller on
pci0000:00:04.1
Dec 21 20:44:56 sid kernel: ide0: BM-DMA at 0xd800-0xd807, BIOS settings:
hda:D
MA, hdb:DMA
Dec 21 20:44:56 sid kernel: ide1: BM-DMA at 0xd808-0xd80f, BIOS settings:
hdc:p
io, hdd:pio
Dec 21 20:44:56 sid kernel: hda: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM
drive
Dec 21 20:44:56 sid kernel: hdb: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive
Dec 21 20:44:56 sid kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 21 20:44:56 sid kernel: PDC20265: IDE controller at PCI slot 0000:00:11.0
Dec 21 20:44:56 sid kernel: PCI: Found IRQ 10 for device 0000:00:11.0
Dec 21 20:44:56 sid kernel: PCI: Sharing IRQ 10 with 0000:00:0b.0
Dec 21 20:44:56 sid kernel: PDC20265: chipset revision 2
Dec 21 20:44:56 sid kernel: PDC20265: 100%% native mode on irq 10
Dec 21 20:44:56 sid kernel: PDC20265: (U)DMA Burst Bit ENABLED Primary PCI
Mode Sec
ondary PCI Mode.
Dec 21 20:44:56 sid kernel: ide2: BM-DMA at 0x8000-0x8007, BIOS settings:
hde:D
MA, hdf:DMA
Dec 21 20:44:56 sid kernel: ide3: BM-DMA at 0x8008-0x800f, BIOS settings:
hdg:p
io, hdh:pio
Dec 21 20:44:56 sid kernel: hde: ST3120023A, ATA DISK drive
Dec 21 20:44:56 sid kernel: hdf: ST313021A, ATA DISK drive
Dec 21 20:44:56 sid kernel: ide2 at 0x9400-0x9407,0x9002 on irq 10
Dec 21 20:44:56 sid kernel: hde: max request size: 128KiB
Dec 21 20:44:56 sid kernel: hde: 234441648 sectors (120034 MB) w/2048KiB
Cache, CHS
=65535/16/63, UDMA(100)
Dec 21 20:44:56 sid kernel: hde: hde1 < hde5 hde6 hde7 > hde2 hde3 hde4
Dec 21 20:44:56 sid kernel: hdf: max request size: 128KiB
Dec 21 20:44:56 sid kernel: hdf: 25434228 sectors (13022 MB) w/512KiB Cache,
CHS=25
232/16/63, UDMA(66)
Dec 21 20:44:56 sid kernel: hdf: hdf1
Dec 21 20:44:56 sid kernel: mice: PS/2 mouse device common for all mice
Dec 21 20:44:56 sid kernel: input: ImExPS/2 Logitech Explorer Mouse on
isa0060/seri
o1
Dec 21 20:44:56 sid kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 21 20:44:56 sid kernel: input: AT Translated Set 2 keyboard on isa0060/
serio0
Dec 21 20:44:56 sid kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 21 20:44:56 sid kernel: I2O Core - (C) Copyright 1999 Red Hat Software
Dec 21 20:44:56 sid kernel: I2O: Event thread created as pid 10
Dec 21 20:44:56 sid kernel: i2o: Checking for PCI I2O controllers...
Dec 21 20:44:56 sid kernel: I2O configuration manager v 0.04.
Dec 21 20:44:56 sid kernel: (C) Copyright 1999 Red Hat Software
Dec 21 20:44:56 sid kernel: NET: Registered protocol family 2
Dec 21 20:44:56 sid kernel: IP: routing cache hash table of 2048 buckets,
16Kbytes
Dec 21 20:44:56 sid kernel: TCP: Hash tables configured (established 16384
bind 327
68)
Dec 21 20:44:56 sid kernel: NET: Registered protocol family 1
Dec 21 20:44:56 sid kernel: NET: Registered protocol family 17
Dec 21 20:44:56 sid kernel: EXT3-fs: INFO: recovery required on readonly
filesystem
.
Dec 21 20:44:56 sid kernel: EXT3-fs: write access will be enabled during
recovery.
Dec 21 20:44:56 sid kernel: kjournald starting. Commit interval 5 seconds
Dec 21 20:44:56 sid kernel: EXT3-fs: hde2: orphan cleanup on readonly fs
Dec 21 20:44:56 sid kernel: EXT3-fs: hde2: 2 orphan inodes deleted
Dec 21 20:44:56 sid kernel: EXT3-fs: recovery complete.
Dec 21 20:44:56 sid kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Dec 21 20:44:56 sid kernel: VFS: Mounted root (ext3 filesystem) readonly.
Dec 21 20:44:56 sid kernel: Freeing unused kernel memory: 136k freed
Dec 21 20:44:56 sid kernel: Adding 499960k swap on /dev/hde3. Priority:-1
extents:
1
Dec 21 20:44:56 sid kernel: EXT3 FS on hde2, internal journal
Dec 21 20:44:56 sid kernel: drivers/usb/core/usb.c: registered new driver
usbfs
Dec 21 20:44:56 sid kernel: drivers/usb/core/usb.c: registered new driver hub
Dec 21 20:44:56 sid kernel: drivers/usb/core/usb.c: registered new driver
usbkbd
Dec 21 20:44:56 sid kernel: drivers/usb/input/usbkbd.c: :USB HID Boot Protocol
keyb
oard driver
Dec 21 20:44:56 sid kernel: Creative EMU10K1 PCI Audio Driver, version 0.20a,
17:26
:51 Dec 21 2003
Dec 21 20:44:56 sid kernel: PCI: Found IRQ 5 for device 0000:00:0a.0
Dec 21 20:44:56 sid kernel: emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at
0xa400
-0xa41f, IRQ 5
Dec 21 20:44:56 sid kernel: ac97_codec: AC97 Audio codec, id: 0x8384:0x7609
(SigmaT
el STAC9721/23)
Dec 21 20:44:56 sid kernel: device-mapper: 1.0.6-ioctl (2002-10-15)
initialised: dm
@uk.sistina.com
Dec 21 20:44:56 sid kernel: kjournald starting. Commit interval 5 seconds
Dec 21 20:44:56 sid kernel: EXT3 FS on hde5, internal journal
Dec 21 20:44:56 sid kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Dec 21 20:44:56 sid kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host
Control
ler Interface driver v2.1
Dec 21 20:44:56 sid kernel: PCI: Found IRQ 9 for device 0000:00:04.2
Dec 21 20:44:56 sid kernel: PCI: Sharing IRQ 9 with 0000:00:04.3
Dec 21 20:44:56 sid kernel: uhci_hcd 0000:00:04.2: UHCI Host Controller
Dec 21 20:44:56 sid kernel: uhci_hcd 0000:00:04.2: irq 9, io base 0000d400
Dec 21 20:44:56 sid kernel: uhci_hcd 0000:00:04.2: new USB bus registered,
assigned
bus number 1
Dec 21 20:44:56 sid kernel: hub 1-0:1.0: USB hub found
Dec 21 20:44:56 sid kernel: hub 1-0:1.0: 2 ports detected
Dec 21 20:44:56 sid kernel: PCI: Found IRQ 9 for device 0000:00:04.3
Dec 21 20:44:56 sid kernel: PCI: Sharing IRQ 9 with 0000:00:04.2
Dec 21 20:44:56 sid kernel: uhci_hcd 0000:00:04.3: UHCI Host Controller
Dec 21 20:44:56 sid kernel: uhci_hcd 0000:00:04.3: irq 9, io base 0000d000
Dec 21 20:44:56 sid kernel: uhci_hcd 0000:00:04.3: new USB bus registered,
assigned
bus number 2
Dec 21 20:44:56 sid kernel: hub 2-0:1.0: USB hub found
Dec 21 20:44:56 sid kernel: hub 2-0:1.0: 2 ports detected
Dec 21 20:44:56 sid kernel: hub 1-0:1.0: new USB device on port 2, assigned
address
2
Dec 21 20:44:56 sid kernel: hub 2-0:1.0: new USB device on port 2, assigned
address
2
Dec 21 20:44:56 sid kernel: hub 2-2:1.0: USB hub found
Dec 21 20:44:56 sid kernel: hub 2-2:1.0: 4 ports detected
Dec 21 20:44:56 sid kernel: eth0: link up, 10Mbps, half-duplex, lpa 0x0000
Dec 21 20:44:58 sid usb.agent[122]: missing kernel or user mode driver usbcore
Dec 21 20:44:58 sid usb.agent[183]: missing kernel or user mode driver usbcore
Dec 21 20:44:58 sid usb.agent[146]: missing kernel or user mode driver usbcore
Dec 21 20:44:58 sid kernel: drivers/usb/class/usblp.c: usblp0: USB
Bidirectional pr
inter dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x001A
Dec 21 20:44:58 sid kernel: drivers/usb/core/usb.c: registered new driver
usblp
Dec 21 20:44:58 sid kernel: drivers/usb/class/usblp.c: v0.13: USB Printer
Device Cl
ass driver
Dec 21 20:44:59 sid kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE]
Dec 21 20:44:59 sid kernel: parport_pc: Via 686A parallel port: io=0x378
Dec 21 20:44:59 sid kernel: lp0: using parport0 (polling).
Dec 21 20:45:01 sid xfs: ignoring font path element /usr/lib/X11/fonts/CID/
(unread
able)
Dec 21 20:45:01 sid xfs: ignoring font path element /usr/lib/X11/fonts/
cyrillic/ (u
nreadable)
Dec 21 20:45:06 sid kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version
1.16ac
)
Dec 21 20:45:39 sid kernel: hub 2-2:1.0: new USB device on port 2, assigned
address
3
Dec 21 20:45:40 sid kernel: SCSI subsystem initialized
Dec 21 20:45:40 sid kernel: Initializing USB Mass Storage driver...
Dec 21 20:45:40 sid kernel: usb-storage: This device (0a17,0006,1000 S 05 P
01) has
an unneeded SubClass entry in unusual_devs.h
Dec 21 20:45:40 sid kernel: Please send a copy of this message to
<linux-usb-dev
[EMAIL PROTECTED]>
Dec 21 20:45:40 sid kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Dec 21 20:45:40 sid kernel: Vendor: Pentax Model: Optio S Rev:
1000
Dec 21 20:45:40 sid kernel: Type: Direct-Access ANSI
SCSI
revision: 02
Dec 21 20:45:40 sid scsi.agent[696]: bogus sysfs DEVPATH=/devices/
pci0000:00/0000:0
0:04.3/usb2/2-2/2-2.2/2-2.2:1.0/host0/0:0:0:0
Dec 21 20:45:40 sid kernel: drivers/usb/core/usb.c: registered new driver
usb-stora
ge
Dec 21 20:45:40 sid kernel: USB Mass Storage support registered.
Dec 21 21:04:56 sid -- MARK --
--
www.mallorcaweb.net/joanmiquel *
_ www.bulmalug.net _ * Plataforma # # ## # #
_ | | ___ __ _ _ _ _ __ (_) * NO AL 2on CINTUR� ## # # # # #
| || |/ _ \/ _` | ' \| ' \| | * http://noalcinturo.org # ## # # # #
\__/ \___/\__,_|_||_|_|_|_|_| * # # ##
Linux Registered User #164872 * PROU d'especulaci� urban�stica. # #
Linux version 2.6.0 ([EMAIL PROTECTED]) (gcc version 3.3.2 20030908 (Debian
prerelease)) #2 Sun Dec 21 17:06:42 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65516
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61420 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
ACPI: RSDP (v000 ASUS ) @ 0x000f6750
ACPI: RSDT (v001 ASUS A7V 0x30303031 MSFT 0x31313031) @ 0x0ffec000
ACPI: FADT (v001 ASUS A7V 0x30303031 MSFT 0x31313031) @ 0x0ffec080
ACPI: BOOT (v001 ASUS A7V 0x30303031 MSFT 0x31313031) @ 0x0ffec040
ACPI: DSDT (v001 ASUS A7V 0x00001000 MSFT 0x0100000b) @ 0x00000000
Building zonelist for node : 0
Kernel command line: root=/dev/hde2
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 908.606 MHz processor.
Console: colour VGA+ 80x25
Memory: 256044k/262064k available (1645k kernel code, 5304k reserved, 707k data, 136k
init, 0k highmem)
Calibrating delay loop... 1785.85 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 907.0964 MHz.
..... host bus clock speed is 201.0769 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 81 & 1f -> 01
PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0
spurious 8259A interrupt: IRQ7.
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x80
Machine check exception polling timer started.
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pcnet32.c:v1.27b 01.10.2002 [EMAIL PROTECTED]
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 10 for device 0000:00:0b.0
PCI: Sharing IRQ 10 with 0000:00:11.0
eth0: RealTek RTL8139 at 0xd080d000, 00:40:95:30:39:3f, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
hdb: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PDC20265: IDE controller at PCI slot 0000:00:11.0
PCI: Found IRQ 10 for device 0000:00:11.0
PCI: Sharing IRQ 10 with 0000:00:0b.0
PDC20265: chipset revision 2
PDC20265: 100% native mode on irq 10
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:DMA
ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio
hde: ST3120023A, ATA DISK drive
hdf: ST313021A, ATA DISK drive
ide2 at 0x9400-0x9407,0x9002 on irq 10
hde: max request size: 128KiB
hde: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hde: hde1 < hde5 hde6 hde7 > hde2 hde3 hde4
hdf: max request size: 128KiB
hdf: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=25232/16/63, UDMA(66)
hdf: hdf1
mice: PS/2 mouse device common for all mice
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 10
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hde2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 130374
ext3_orphan_cleanup: deleting unreferenced inode 130373
EXT3-fs: hde2: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 136k freed
Adding 499960k swap on /dev/hde3. Priority:-1 extents:1
EXT3 FS on hde2, internal journal
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/core/usb.c: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
Creative EMU10K1 PCI Audio Driver, version 0.20a, 17:26:51 Dec 21 2003
PCI: Found IRQ 5 for device 0000:00:0a.0
emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at 0xa400-0xa41f, IRQ 5
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
device-mapper: 1.0.6-ioctl (2002-10-15) initialised: [EMAIL PROTECTED]
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 9 for device 0000:00:04.2
PCI: Sharing IRQ 9 with 0000:00:04.3
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: irq 9, io base 0000d400
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:04.3
PCI: Sharing IRQ 9 with 0000:00:04.2
uhci_hcd 0000:00:04.3: UHCI Host Controller
uhci_hcd 0000:00:04.3: irq 9, io base 0000d000
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 1-0:1.0: new USB device on port 2, assigned address 2
hub 2-0:1.0: new USB device on port 2, assigned address 2
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2
vid 0x04F9 pid 0x001A
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
hub 2-2:1.0: new USB device on port 2, assigned address 3
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb-storage: USB Mass Storage device detected
usb-storage: act_altsetting is 0, id_index is 63
usb-storage: -- associate_dev
usb-storage: Vendor: Pentax
usb-storage: Product: Optio S
usb-storage: This device (0a17,0006,1000 S 05 P 01) has an unneeded SubClass entry in
unusual_devs.h
Please send a copy of this message to <[EMAIL PROTECTED]>
usb-storage: Transport: Control/Bulk/Interrupt
usb-storage: Protocol: 8070i
usb-storage: Endpoints: In: 0xcdfdd300 Out: 0xcdfdd314 Int: 0xcdfdd328 (Period 1)
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Faking INQUIRY command
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: Pentax Model: Optio S Rev: 1000
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.