Hello,
with kernel 2.6.x my usb-camera stopped working:
Feb 23 11:02:54 polymeraki vmunix: usb 3-2: new full speed USB device using address 2
Feb 23 11:02:54 polymeraki vmunix: Initializing USB Mass Storage driver...
Feb 23 11:02:54 polymeraki vmunix: scsi1 : SCSI emulation for USB Mass Storage devices
Feb 23 11:02:54 polymeraki scsi.agent[927]: how to add device type= at
/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/host1/1:0:0:0 ??
Feb 23 11:02:54 polymeraki kernel: Vendor: Fujifilm Model: FinePix 1400Zoom Rev:
1000
Feb 23 11:02:54 polymeraki kernel: Type: Direct-Access ANSI
SCSI revision: 02
Feb 23 11:03:00 polymeraki vmunix: sda : READ CAPACITY failed.
Feb 23 11:03:00 polymeraki vmunix: sda : status=0, message=00, host=7, driver=00
Feb 23 11:03:00 polymeraki vmunix: sda : sense not available.
Feb 23 11:03:00 polymeraki vmunix: sda: assuming Write Enabled
Feb 23 11:03:00 polymeraki vmunix: sda: assuming drive cache: write through
Feb 23 11:03:00 polymeraki vmunix: sda : READ CAPACITY failed.
Feb 23 11:03:00 polymeraki vmunix: sda : status=0, message=00, host=7, driver=00
Feb 23 11:03:00 polymeraki vmunix: sda : sense not available.
Feb 23 11:03:00 polymeraki vmunix: sda: assuming Write Enabled
Feb 23 11:03:00 polymeraki vmunix: sda: assuming drive cache: write through
Feb 23 11:03:01 polymeraki kernel: sda : READ CAPACITY failed.
Feb 23 11:03:01 polymeraki kernel: sda : status=0, message=00, host=7, driver=00
Feb 23 11:03:01 polymeraki vmunix: Attached scsi removable disk sda at scsi1, channel
0, id 0, lun 0
Feb 23 11:03:01 polymeraki vmunix: WARNING: USB Mass Storage data integrity not assured
Feb 23 11:03:01 polymeraki vmunix: USB Mass Storage device found at 2
Feb 23 11:03:01 polymeraki vmunix: drivers/usb/core/usb.c: registered new driver
usb-storage
Feb 23 11:03:01 polymeraki vmunix: USB Mass Storage support registered.
Feb 23 11:03:01 polymeraki kernel: sda : sense not available.
Feb 23 11:03:01 polymeraki kernel: sda: assuming Write Enabled
Feb 23 11:03:01 polymeraki kernel: sda: assuming drive cache: write through
Feb 23 11:03:01 polymeraki kernel: sda:<3>Buffer I/O error on device sda, logical
block 0
Feb 23 11:03:01 polymeraki kernel: Buffer I/O error on device sda, logical block 0
Feb 23 11:03:01 polymeraki kernel: ldm_validate_partition_table(): Disk read failed.
Feb 23 11:03:01 polymeraki kernel: Buffer I/O error on device sda, logical block 0
Feb 23 11:03:01 polymeraki kernel: unable to read partition table
Feb 23 11:03:01 polymeraki kernel: sda:<3>Buffer I/O error on device sda, logical
block 0
Feb 23 11:03:01 polymeraki kernel: ldm_validate_partition_table(): Disk read failed.
Feb 23 11:03:01 polymeraki kernel: Buffer I/O error on device sda, logical block 0
Feb 23 11:03:01 polymeraki kernel: unable to read partition table
This is kernel 2.6.3, same with 2.6.0-test9, 2.6.1, 2.6.2.
Everything works fine with 2.4.20 and 2.4.22.
I have seen that there were various fixes for usb-storage since 2.6.0
(particularly some mode-sense problems are supposed to be fixed?),
there is also an entry in unusual_devs.h:
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
"Fujifilm",
"FinePix 1400Zoom",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
but all that doesn't seem to have impressed my Fuji camera.
The same error has been reported here: http://www.mail-archive.com/[EMAIL
PROTECTED]/msg09088.html
but no result.
Should I open a kernel bug on this issue or may there be something else causing the
error ?
TIA,
Martin K�chler
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id56&alloc_id438&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
