ThinkPad X40, kernel 2.6.6-rc1. uhci/ehci. Suspend/resume hard freeze.
Kingston flash drive.
Adam
[insert flash drive]
usb 2-2: new full speed USB device using address 2
usb 2-2: Product: USB DRIVE
usb 2-2: Manufacturer: KINGSTON
usb 2-2: SerialNumber: 1120363052063
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: KINGSTON Model: USB DRIVE Rev: 1.12
Type: Direct-Access ANSI SCSI revision: 02
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SCSI device sda: 125952 512-byte hdwr sectors (64 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
[suspend/resume]
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:00:1f.6
PCI: Sharing IRQ 5 with 0000:02:00.1
hub 4-0:1.0: over-current change on port 3
sda : READ CAPACITY failed.
sda : status=0, message=00, host=7, driver=00
sda : sense not available.
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda : READ CAPACITY failed.
sda : status=0, message=00, host=7, driver=00
sda : sense not available.
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda:<3>Buffer I/O error on device sda, logical block 0
Buffer I/O error on device sda, logical block 0
Buffer I/O error on device sda, logical block 262143
Buffer I/O error on device sda, logical block 262143
Buffer I/O error on device sda, logical block 0
ldm_validate_partition_table(): Disk read failed.
Buffer I/O error on device sda, logical block 0
[hard freeze]
NMI Watchdog detected LOCKUP on CPU0, eip c0110824, registers:
CPU: 0
EIP: 0060:[<c0110824>] Tainted: PF
EFLAGS: 00000093 (2.6.6-rc1)
EIP is at delay_tsc+0x14/0x20
eax: 9142ed29 ebx: 00002af8 ecx: 9142ddb9 edx: 00000002
esi: 00000003 edi: de85e800 ebp: 00001101 esp: c153accc
ds: 007b es: 007b ss: 0068
Process khubd (pid: 5, threadinfo=c153a000 task=df66e030)
Stack: 00000000 c01afbe9 e0995a92 c153acf8 c0119967 f3dacd58 3c0d698d 00000000
00000206 00100000 c153ad08 00000206 00000046 c57cf6b3 00000000 00000046
00000000 00000206 00000501 c153ad38 c011a531 de7b3f64 00000001 00000001
Call Trace:
[<c01afbe9>] __delay+0x9/0x10
[<e0995a92>] ehci_hub_control+0x2e2/0x3f0 [ehci_hcd]
[<c0119967>] recalc_task_prio+0x97/0x1c0
[<c011a531>] __wake_up_common+0x31/0x60
[<c023d02c>] rh_call_control+0x18c/0x380
[<c023e69c>] usb_hcd_giveback_urb+0x1c/0x30
[<c023deea>] hcd_submit_urb+0x13a/0x170
[<c023eac2>] usb_submit_urb+0x222/0x340
[<c023deea>] hcd_submit_urb+0x13a/0x170
[<c023ecdd>] usb_start_wait_urb+0x3d/0xc0
[<c023deea>] hcd_submit_urb+0x13a/0x170
[<c023eac2>] usb_submit_urb+0x222/0x340
[<c023edc2>] usb_internal_control_msg+0x62/0x80
[<c023ee6f>] usb_control_msg+0x8f/0xb0
[<c023aa73>] get_port_status+0x43/0x50
[<c023bc6a>] hub_port_status+0x3a/0xb0
[<c0124c80>] process_timeout+0x0/0x10
[<c023bd56>] hub_port_wait_reset+0x76/0x150
[<c023be70>] hub_port_reset+0x40/0xe0
[<c023c212>] hub_port_connect_change+0x142/0x2c0
[<c023c6f2>] hub_events+0x362/0x430
[<c023c7f5>] hub_thread+0x35/0xf0
[<c011a4f0>] default_wake_function+0x0/0x10
[<c023c7c0>] hub_thread+0x0/0xf0
[<c010429d>] kernel_thread_helper+0x5/0x18
Code: 29 c8 39 d8 72 f6 5b c3 8d 74 26 00 55 b8 00 f0 ff ff 57 56
console shuts up ...
<6>SysRq : Resetting
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
