On Thu, 6 May 2004, Andreas Hocevar wrote: > Hi, > > thanks for your great efforts to get external devices with genesys chipset > working with ehci! > > Since Kernel 2.6.4 the device hangs when burning CDs with cdrecord or cdrdao > during sending the cue-sheet. The only case where this does not happen is > when using tao mode for data CDs. > > Might this be a side-effect of the new routines checking for the "00 00 00 > ..." packets that the genesys chip produces? When using verbose mode in > cdrdao the cue-sheet is printed to the console, and it contains a lot of "00 > 00 00 ...".
What new routines are you talking about? > Sorry for this unprofessional description, maybe someone can check this with > her/his device or give me instructions what debugging information would be > needed to resolve this. See output of "cdrdao scanbus" and "lsusb -v" below. > > Please CC replys to my PM, because I am not subscribed to the list. > > Thank you! > Andreas. So far as I can tell, no amount of additional debugging information will help fix the Genesys problem. What we need is expert advice from a technical person who understands how the chip works. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
