Hi,

I'm not sure if I should post this question here or at the users mailing list. 
If it should be at the users one, please tell me and I will mail the other 
one.

I have four robots using laptopos and 16 USB Philips webcams, 8 of which are 
connected to the robots (the other eight are spare ones) plus 4 firewire 
cameras.

The code that runs in the robots is the same for every robot. It's important 
to us that when our program starts it now which cameras is /dev/video0 and 
which cameras is /dev/video1 (the left one, or the right one, etc..). With 
the firewire cameras I read the serial number of the cameras to fin out which 
is which, can I do the same with USB cameras? How?

This is very important to us since we have the cameras divided in three groups 
(three different positions in the robots) so that at any time we can exchange 
cameras (or even exchange a laptop that is broken with the spare one) without 
having to change any software. We have a list of serial numbers and the 
respective group.

This way during competitions we can repair/exchange damaged hardware very 
quickly and efficiently. All I need is to now the serial number of the camera 
with /dev/videoX assigned to her.

Thanks in advanced for any help.

Regards.

Hugo Costelha


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to