as I didn't get any response on the usb-users ml, maybe somebody could help me here, cause I don't know if it is a kernel bug, or something else. thanks in advance for any help!
greets ---------- Forwarded Message ---------- Subject: bulk timeout on ep1out Date: Saturday 10 July 2004 16:51 From: dkey <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] hi list! i'm using a Fritz!Card USB v2.1, but it does not work under linux. i downloaded drivers for the device from http://webgw.avm.de:8080/download/Download.jsp?lang=de&os=linux&product=FRITZ!Card% 20USB% 20v2.x&category=fritz&from=http://www.avm.de/de/Download/index.inhalt.php3&cssurl=http://www.avm.de/de/Download/download_css.css&imgbase=http://www.avm.de/de/Download/images/ now my problem: my linux machine runs kernel 2.6.7, when i connect the device i get following messages: usb 2-2.2: new full speed USB device using address 6 usb 2-2.2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2.2: default language 0x0409 usb 2-2.2: Product: FRITZ!Card USB v2.1 usb 2-2.2: Manufacturer: AVM Berlin usb 2-2.2: hotplug usb 2-2.2: configuration #1 chosen from 2 choices usb 2-2.2: adding 2-2.2:1.0 (config #1, interface 0) usb 2-2.2:1.0: hotplug after starting capiinit CAPI Subsystem Rev 1.1.2.8 capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) fcusb2: module license 'Proprietary' taints kernel. fcusb2: AVM FRITZ!Card USB v2 driver, revision 0.5.2 fcusb2: (fcusb2 built on Jul 9 2004 at 23:11:20) fcusb2: Loading... fcusb2 2-2.2:1.0: usb_probe_interface fcusb2 2-2.2:1.0: usb_probe_interface - got id fcusb2: Driver 'fcusb2' attached to stack. (152) kcapi: Controller 1: fcusb2-0006 attached usbcore: registered new driver fcusb2 fcusb2: Loaded. usb 2-2.2: bulk timeout on ep1out fcusb2: USB I/O error, code -110! fcusb2: Firmware does not respond! kcapi: card 1 down. lcpci output: 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 02) Subsystem: Silicon Integrated Systems [SiS] SiS 645xx Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at d0000000 (32-bit, non-prefetchable) Capabilities: [c0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=3 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 9 Region 4: I/O ports at 10c0 [size=32] 0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 701d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 3000ns max) Interrupt: pin B routed to IRQ 9 Region 0: Memory at e2427000 (32-bit, non-prefetchable) Capabilities: [64] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Interrupt: pin ? routed to IRQ 11 Region 4: I/O ports at 4000 [size=16] Capabilities: [58] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 5 Region 0: I/O ports at d400 Region 1: I/O ports at d800 [size=128] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 9 Region 0: Memory at e2420000 (32-bit, non-prefetchable) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 3 Region 0: Memory at e2421000 (32-bit, non-prefetchable) 0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin C routed to IRQ 5 Region 0: Memory at e2422000 (32-bit, non-prefetchable) 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max) Interrupt: pin D routed to IRQ 11 Region 0: Memory at e2423000 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Micro-Star International Co., Ltd.: Unknown device 0900 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at dc00 Region 1: Memory at e2424000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e000 Region 1: Memory at e2425000 (32-bit, non-prefetchable) [size=256] 0000:00:08.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) Subsystem: Creatix Polymedia GmbH: Unknown device 0003 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 8000ns max) Interrupt: pin A routed to IRQ 3 Region 0: Memory at e2426000 (32-bit, non-prefetchable) Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME- 0000:00:0a.0 Communication controller: Intel Corp. 536EP Data Fax Modem Subsystem: Creatix Polymedia GmbH V.9X DSP Data Fax Modem Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 9 Region 0: Memory at e2000000 (32-bit, non-prefetchable) Capabilities: [e0] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=375mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA]) Subsystem: CardExpert Technology: Unknown device 0431 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, non-prefetchable) Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 please cc me, as i'm not subscribed on this list! greets ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
