Current Linus tree still doesnt work with this drive, the genesys patch
that went in recently does not help.
Its stuck in partition type scan. Any ideas?
Maybe this 'Illegal Request: Invalid field in cdb' is the reason for the
failure?
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0702 Rev= 0.02
S: Product=USB TO IDE
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 96mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Total memory = 768MB; using 2048kB for hash table (at c0800000)
Linux version 2.6.9-rc1-bk9 ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE Linux)) #7
Fri Sep 3 15:57:56 CEST 2004
PCI bus 0 controlled by pci at 80000000
RTAS Event Scan Rate: 1 (29999 jiffies)
On node 0 totalpages: 196608
DMA zone: 196608 pages, LIFO batch:16
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: debug root=/dev/sda3
OpenPIC at f8ec0000 (size 40000)
OpenPIC irqs 0..15 in IDU
OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at fd3be000
PID hash table entries: 4096 (order: 12, 65536 bytes)
time_init: decrementer frequency = 20.781128 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 772224k available (2020k kernel code, 2316k data, 124k init, 0k highmem)
Calibrating delay loop... 372.73 BogoMIPS (lpj=186368)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
PCI: Probing PCI hardware
Registering openpic with sysfs...
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
request_OF_resource(interrupt-controller), parent not found
PCI: Via IRQ fixup for 0000:00:12.0, from 18 to 2
PCI: Via IRQ fixup for 0000:00:12.1, from 17 to 1
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize
loop: loaded (max 8 devices)
pcnet32.c:v1.30i 06.28.2004 [EMAIL PROTECTED]
PCI: Enabling device 0000:00:0c.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbfec00, 00 04 ac 97 35 56
tx_start_pt(0x0c00):~220 bytes, BCR18(68e2):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 22.
eth0: registered as PCnet/FAST 79C971
pcnet32: 1 cards_found.
PCI: Enabling device 0000:00:10.0 (0140 -> 0143)
sym0: <875> rev 0x4 at pci 0000:00:10.0 irq 23
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Using anticipatory io scheduler
sym0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
Vendor: IBM Model: DNES-309170W Rev: SA40
Type: Direct-Access ANSI SCSI revision: 03
sym0:2:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:2:0): Beginning Domain Validation
scsi(0:0:2:0): Domain Validation skipping write tests
scsi(0:0:2:0): Ending Domain Validation
Vendor: IBM Model: CDRM00203 !K Rev: 1_01
Type: CD-ROM ANSI SCSI revision: 02
scsi(0:0:3:0): Beginning Domain Validation
sym0:3: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 15)
scsi(0:0:3:0): Domain Validation skipping write tests
scsi(0:0:3:0): Ending Domain Validation
sym0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
Vendor: IBM Model: DNES-309170W Rev: SA40
Type: Direct-Access ANSI SCSI revision: 03
sym0:4:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:4:0): Beginning Domain Validation
scsi(0:0:4:0): Domain Validation skipping write tests
scsi(0:0:4:0): Ending Domain Validation
SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
SCSI device sdb: 17774160 512-byte hdwr sectors (9100 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi0, channel 0, id 4, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 3, lun 0, type 5
Attached scsi generic sg2 at scsi0, channel 0, id 4, lun 0, type 0
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
PCI: Enabling device 0000:00:12.2 (0140 -> 0142)
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 0000:00:12.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024
ehci_hcd 0000:00:12.2: capability 0001 at 68
ehci_hcd 0000:00:12.2: irq 17, pci mem f1012000
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:12.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
ehci_hcd 0000:00:12.2: supports USB remote wakeup
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.9-rc1-bk9 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:12.0 (0140 -> 0141)
uhci_hcd 0000:00:12.0: UHCI Host Controller
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
uhci_hcd 0000:00:12.0: irq 18, io base 00bff000
uhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:12.0: detected 2 ports
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: default language 0x0409
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.9-rc1-bk9 uhci_hcd
usb usb2: SerialNumber: 0000:00:12.0
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:12.2: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
PCI: Enabling device 0000:00:12.1 (0140 -> 0141)
uhci_hcd 0000:00:12.1: UHCI Host Controller
ehci_hcd 0000:00:12.2: port 1 high speed
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using address 2
uhci_hcd 0000:00:12.1: irq 17, io base 00bff400
uhci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:12.1: detected 2 ports
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: default language 0x0409
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.9-rc1-bk9 uhci_hcd
usb usb3: SerialNumber: 0000:00:12.1
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
uhci_hcd 0000:00:12.0: suspend_hc
usb 1-1: new device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-1: default language 0x0409
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
uhci_hcd 0000:00:12.0: port 1 portsc 008a
hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:12.0: port 2 portsc 008a
hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:12.1: port 1 portsc 008a
hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
uhci_hcd 0000:00:12.1: suspend_hc
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:12.1: port 2 portsc 008a
hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
ReiserFS: sda3: replayed 40 transactions in 20 seconds
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 124k init 28k pmac 8k prep
Adding 1032184k swap on /dev/sda2. Priority:42 extents:1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-rc1-bk9 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:12.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-rc1-bk9 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:12.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-rc1-bk9 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:12.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2121 ProdID=2121 Rev= 0.02
C:* #Ifs= 1 Cfg#= 1 Atr=21 MxPwr=288mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
usb 1-1: USB disconnect, address 2
usb 1-1: usb_disable_device nuking all URBs
usb 1-1: unregistering interface 1-1:1.0
usb 1-1:1.0: hotplug
usb 1-1: unregistering device
usb 1-1: hotplug
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
ehci_hcd 0000:00:12.2: GetStatus port 2 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 2
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 3 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 3
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 4 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 4
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 2 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 2
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 2 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 2
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 2 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 2
hub 1-0:1.0: enabling power on all ports
uhci_hcd 0000:00:12.0: port 1 portsc 0880
hub 2-0:1.0: over-current change on port 1
uhci_hcd 0000:00:12.0: port 2 portsc 0880
hub 2-0:1.0: over-current change on port 2
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 2 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 2
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 3 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 3
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 4 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 4
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 2 status 001020 POWER sig=se0 OCC
hub 1-0:1.0: over-current change on port 2
hub 1-0:1.0: enabling power on all ports
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:12.2: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
hub 1-0:1.0: port 1 not reset yet, waiting 50ms
ehci_hcd 0000:00:12.2: port 1 high speed
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using address 3
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: default language 0x0409
usb 1-1: Product: USB TO IDE
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-rc1-bk9 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:12.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-rc1-bk9 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:12.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-rc1-bk9 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:12.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0702 Rev= 0.02
S: Product=USB TO IDE
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 96mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Initializing USB Mass Storage driver...
usb-storage 1-1:1.0: usb_probe_interface
usb-storage 1-1:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Vendor: Genesys Logic, Product: USB TO IDE
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Faking INQUIRY command
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x331e L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x331e R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x331f L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x331f R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 25431840 512-byte hdwr sectors (13021 MB)
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 c0 00
usb-storage: Bulk Command S 0x43425355 T 0x3320 L 192 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes
usb-storage: Status code -32; transferred 0/192
usb-storage: clearing endpoint halt for pipe 0xc0008380
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3320 R 192 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80003320 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80003320 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage: Illegal Request: Invalid field in cdb
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sdc: test WP failed, assume Write Enabled
sdc: assuming drive cache: write through
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x3322 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3322 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x3324 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3324 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80003324 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80003324 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage: Illegal Request: Invalid field in cdb
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sdc:<7>usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0x3325 L 4096 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling sg request
usb-storage: Status code -104; transferred 0/4096
usb-storage: -- transfer cancelled
usb-storage: Bulk data transfer result 0x4
usb-storage: -- command was aborted
usb-storage: usb_stor_Bulk_reset called
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
SysRq : Show State
sibling
task PC pid father child younger older
init S 10018FC4 0 1 0 2 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ba0] schedule_timeout+0x80/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
ksoftirqd/0 S 00000000 0 2 1 3 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001ec10] ksoftirqd+0xc8/0xd4
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
events/0 S 00000000 0 3 1 4 19 2 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c002ac58] worker_thread+0x224/0x228
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
khelper S 00000000 0 4 3 5 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c002ac58] worker_thread+0x224/0x228
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
netlink/0 S 00000000 0 5 3 18 4 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c002ac58] worker_thread+0x224/0x228
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
kblockd/0 S 00000000 0 18 3 29 5 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c002ac58] worker_thread+0x224/0x228
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
khubd S 00000000 0 19 1 31 3 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c016c5a0] hub_thread+0x188/0xf54
[c00096c4] kernel_thread+0x44/0x60
pdflush S 00000000 0 29 3 30 18 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c003c05c] pdflush+0xc0/0x1f4
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
pdflush S 00000000 0 30 3 32 29 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c003c05c] pdflush+0xc0/0x1f4
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
aio/0 S 00000000 0 32 3 172 30 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c002ac58] worker_thread+0x224/0x228
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
kswapd0 S 00000000 0 31 1 138 19 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c0042a04] kswapd+0x98/0x2dc
[c00096c4] kernel_thread+0x44/0x60
scsi_eh_0 S 00000000 0 138 1 2031 31 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f500c] __down_interruptible+0xcc/0x15c
[c0147430] scsi_error_handler+0x590/0xe68
[c00096c4] kernel_thread+0x44/0x60
reiserfs/0 S 00000000 0 172 3 32 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c002ac58] worker_thread+0x224/0x228
[c002f770] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
dhcpcd S 0FF4B2DC 0 2031 1 2104 138 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ba0] schedule_timeout+0x80/0xe0
[c0023570] sys_nanosleep+0x11c/0x288
[c00064a0] ret_from_syscall+0x0/0x44
syslogd S 0FF75614 0 2104 1 2111 2031 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
klogd R running 0 2111 1 2148 2104 (NOTLB)
portmap S 0FF26CF4 0 2148 1 2149 2111 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a5c0] sys_poll+0x310/0x3ec
[c00064a0] ret_from_syscall+0x0/0x44
resmgrd S 0FF4DCF4 0 2149 1 2223 2148 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a5c0] sys_poll+0x310/0x3ec
[c00064a0] ret_from_syscall+0x0/0x44
sshd S 0FB8B614 0 2223 1 3964 3324 2149 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
slpd S 0FD41614 0 3324 1 3334 2223 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
ntpd S 0FEBC614 0 3334 1 3382 3324 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
cupsd R running 0 3363 1 3839 3806 (NOTLB)
ypbind S 0FED3D48 0 3382 1 3383 3334 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a5c0] sys_poll+0x310/0x3ec
[c00064a0] ret_from_syscall+0x0/0x44
ypbind S 0FFA4600 0 3383 1 3386 3382 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0026d78] sys_rt_sigtimedwait+0x21c/0x358
[c00064a0] ret_from_syscall+0x0/0x44
ypbind S 0FEAC310 0 3386 1 3389 3383 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ba0] schedule_timeout+0x80/0xe0
[c0023570] sys_nanosleep+0x11c/0x288
[c00064a0] ret_from_syscall+0x0/0x44
nscd R running 0 3389 1 3390 3386 (NOTLB)
nscd R running 0 3390 1 3391 3389 (NOTLB)
nscd S 0FFDA4F4 0 3391 1 3392 3390 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0194f70] skb_recv_datagram+0x1a8/0x218
[c01ddec4] unix_accept+0x80/0x10c
[c018f7e4] sys_accept+0xb4/0x15c
[c018fbf8] sys_socketcall+0x1a8/0x1d8
[c00064a0] ret_from_syscall+0x0/0x44
nscd S 0FFDA4F4 0 3392 1 3393 3391 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0194f70] skb_recv_datagram+0x1a8/0x218
[c01ddec4] unix_accept+0x80/0x10c
[c018f7e4] sys_accept+0xb4/0x15c
[c018fbf8] sys_socketcall+0x1a8/0x1d8
[c00064a0] ret_from_syscall+0x0/0x44
nscd S 0FFDA4F4 0 3393 1 3394 3392 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0194f70] skb_recv_datagram+0x1a8/0x218
[c01ddec4] unix_accept+0x80/0x10c
[c018f7e4] sys_accept+0xb4/0x15c
[c018fbf8] sys_socketcall+0x1a8/0x1d8
[c00064a0] ret_from_syscall+0x0/0x44
nscd S 0FFDA4F4 0 3394 1 3485 3393 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0194f70] skb_recv_datagram+0x1a8/0x218
[c01ddec4] unix_accept+0x80/0x10c
[c018f7e4] sys_accept+0xb4/0x15c
[c018fbf8] sys_socketcall+0x1a8/0x1d8
[c00064a0] ret_from_syscall+0x0/0x44
kdm S 0FDA4614 0 3485 1 3536 3394 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
automount S 0FF4AB8C 0 3536 1 3538 3485 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c00632cc] pipe_wait+0x70/0xf4
[c00638d8] pipe_readv+0x1f8/0x324
[c0063a2c] pipe_read+0x28/0x38
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
automount S 0FF4AB8C 0 3538 1 3540 3536 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c00632cc] pipe_wait+0x70/0xf4
[c00638d8] pipe_readv+0x1f8/0x324
[c0063a2c] pipe_read+0x28/0x38
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
automount S 0FF4AB8C 0 3540 1 3648 3538 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c00632cc] pipe_wait+0x70/0xf4
[c00638d8] pipe_readv+0x1f8/0x324
[c0063a2c] pipe_read+0x28/0x38
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
xinetd S 0FE2F614 0 3648 1 3795 3540 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
cron S 0FF4B2DC 0 3795 1 3799 3648 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ba0] schedule_timeout+0x80/0xe0
[c0023570] sys_nanosleep+0x11c/0x288
[c00064a0] ret_from_syscall+0x0/0x44
autobuild S 0FE3BC9C 0 3799 1 3984 3806 3795 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
rpciod S 00000000 0 3806 1 3363 3799 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01e85d0] rpciod+0x1c0/0x2d4
[c00096c4] kernel_thread+0x44/0x60
abuild-bs S 0FDB82DC 0 3839 1 3877 3363 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ba0] schedule_timeout+0x80/0xe0
[c0023570] sys_nanosleep+0x11c/0x288
[c00064a0] ret_from_syscall+0x0/0x44
mingetty S 0FF6DB8C 0 3877 1 3878 3839 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0111ab8] read_chan+0x390/0x8bc
[c010cf50] tty_read+0xe8/0x100
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
mingetty S 0FF6DB8C 0 3878 1 3879 3877 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0111ab8] read_chan+0x390/0x8bc
[c010cf50] tty_read+0xe8/0x100
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
mingetty S 0FF6DB8C 0 3879 1 3880 3878 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0111ab8] read_chan+0x390/0x8bc
[c010cf50] tty_read+0xe8/0x100
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
mingetty S 0FF6DB8C 0 3880 1 3881 3879 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0111ab8] read_chan+0x390/0x8bc
[c010cf50] tty_read+0xe8/0x100
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
mingetty S 0FF6DB8C 0 3881 1 3944 3880 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0111ab8] read_chan+0x390/0x8bc
[c010cf50] tty_read+0xe8/0x100
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
mingetty S 0FF6DB8C 0 3944 1 3947 3881 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0111ab8] read_chan+0x390/0x8bc
[c010cf50] tty_read+0xe8/0x100
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
login S 0FEFCC9C 0 3947 1 5978 6082 3944 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
sshd S 0FB8B614 0 3964 2223 3970 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c006a954] do_select+0x2b8/0x3a4
[c006ad48] sys_select+0x308/0x484
[c000bc6c] ppc_select+0x98/0xa8
[c00064a0] ret_from_syscall+0x0/0x44
bash S 0FE3BC9C 0 3970 3964 4231 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
autobuild S 0FE3BC9C 0 3984 3799 3987 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
tee S 0FF6DB8C 0 3987 3984 4503 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c00632cc] pipe_wait+0x70/0xf4
[c00638d8] pipe_readv+0x1f8/0x324
[c0063a2c] pipe_read+0x28/0x38
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
su S 0FE88C9C 0 4231 3970 4244 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
bash S 0FE5EB8C 0 4244 4231 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5bfc] schedule_timeout+0xdc/0xe0
[c0111ab8] read_chan+0x390/0x8bc
[c010cf50] tty_read+0xe8/0x100
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
autobuild_wat S 0FDB82DC 0 4503 3984 4504 3987 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ba0] schedule_timeout+0x80/0xe0
[c0023570] sys_nanosleep+0x11c/0x288
[c00064a0] ret_from_syscall+0x0/0x44
.build_script S 0FE3BC9C 0 4504 3984 4579 4503 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
.init_buildsy S 0FE3BC9C 0 4579 4504 6570 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
bash R running 0 5978 3947 6081 (NOTLB)
insmod D 0FF7D080 0 6081 5978 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5864] io_schedule+0x34/0x5c
[c00351f0] __lock_page+0xd4/0x128
[c00361b0] read_cache_page+0x198/0x344
[c008a098] read_dev_sector+0x34/0x11c
[c008ae28] msdos_partition+0x54/0x6d4
[c008a320] check_partition+0xd8/0x164
[c008a5c0] register_disk+0x100/0x16c
[c013485c] add_disk+0x58/0x74
[c015af0c] sd_probe+0x204/0x338
[c012a9a0] bus_match+0x50/0x94
[c012aa3c] device_attach+0x58/0xd0
[c012ade4] bus_add_device+0x78/0x15c
[c0129730] device_add+0x9c/0x180
scsi_eh_1 D 00000000 0 6082 1 6083 3947 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ab0] wait_for_completion+0x7c/0xec
[f1161744] command_abort+0x94/0x10c [usb_storage]
[c014749c] scsi_error_handler+0x5fc/0xe68
[c00096c4] kernel_thread+0x44/0x60
usb-storage D 00000000 0 6083 1 6082 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c01f5ab0] wait_for_completion+0x7c/0xec
[f1162414] usb_stor_msg_common+0x138/0x1ac [usb_storage]
[f116255c] usb_stor_control_msg+0xd4/0xf8 [usb_storage]
[f11626f4] usb_stor_reset_common+0xa4/0x1e0 [usb_storage]
[f11622cc] usb_stor_invoke_transport+0x368/0x378 [usb_storage]
[f1161d68] usb_stor_transparent_scsi_command+0x1c/0xd0 [usb_storage]
[f11646ec] usb_stor_control_thread+0x1ac/0x34c [usb_storage]
[c00096c4] kernel_thread+0x44/0x60
.init_buildsy S 0FE3BC9C 0 6570 4579 6572 6571 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c001b91c] do_wait+0x1f8/0xd5c
[c00064a0] ret_from_syscall+0x0/0x44
perl S 0FE791B0 0 6571 4579 6570 (NOTLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f5510] schedule+0x2b0/0x5d0
[c00632cc] pipe_wait+0x70/0xf4
[c00638d8] pipe_readv+0x1f8/0x324
[c0063a2c] pipe_read+0x28/0x38
[c0055db4] vfs_read+0xe0/0x13c
[c0055f04] sys_read+0x50/0x94
[c00064a0] ret_from_syscall+0x0/0x44
rpm R running 0 6572 6570 (NOTLB)
--
USB is for mice, FireWire is for men!
sUse lINUX ag, nÃRNBERG
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_idP47&alloc_id808&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
