Alle 00:39, mercoled� 24 novembre 2004, David Brownell ha scritto:

>
> Except for the problems that device had when enumerating.
> Those look like device faults that USB recovered from in
> the right ways, despites some scarey messages.

Just to add an information, maybe lost in forwards: The device works 
flawlessly with 2.6.8.1. (last time I've tried on a slightly different 
machine with 2.6.8.1 but IIRC the device worked on the same machine that now 
faults under 2.6.10-rc2-mm3, using 2.6.8.1; anyway I can retest this if 
needed).

The device is detected fully only after few plug/unplug tries, as it fails 
with this message:

Nov 23 00:09:43 kefk kernel: hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0008
Nov 23 00:09:43 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status 
001803 POWER sig=j  CSC CONNECT
Nov 23 00:09:43 kefk kernel: hub 5-0:1.0: port 3, status 0501, change 0001, 
480 Mb/s
Nov 23 00:09:43 kefk kernel: hub 5-0:1.0: debounce: port 3: total 100ms stable 
100ms status 0x501
Nov 23 00:09:43 kefk kernel: ehci_hcd 0000:00:1d.7: port 3 high speed
Nov 23 00:09:43 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status 
001005 POWER sig=se0  PE CONNECT
Nov 23 00:09:43 kefk kernel: usb 5-3: new high speed USB device using ehci_hcd 
and address 4
Nov 23 00:09:43 kefk kernel: ehci_hcd 0000:00:1d.7: devpath 3 ep0in 3strikes
Nov 23 00:09:44 kefk kernel: ehci_hcd 0000:00:1d.7: port 3 full speed --> 
companion
Nov 23 00:09:44 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status 
003801 POWER OWNER sig=j  CONNECT
Nov 23 00:09:44 kefk kernel: uhci_hcd 0000:00:1d.1: wakeup_hc
Nov 23 00:09:44 kefk kernel: hub 2-0:1.0: state 5 ports 2 chg fffc evt 0002
Nov 23 00:09:44 kefk kernel: uhci_hcd 0000:00:1d.1: port 1 portsc 0083,00
Nov 23 00:09:44 kefk kernel: hub 2-0:1.0: port 1, status 0101, change 0001, 12 
Mb/s
Nov 23 00:09:44 kefk kernel: hub 2-0:1.0: debounce: port 1: total 100ms stable 
100ms status 0x101
Nov 23 00:09:44 kefk kernel: usb 2-1: new full speed USB device using uhci_hcd 
and address 4
Nov 23 00:09:44 kefk kernel: uhci_hcd 0000:00:1d.1: uhci_result_control: 
failed with status 440000
Nov 23 00:09:44 kefk kernel: [f7a73240] link (37a731b2) element (37ab2040)
Nov 23 00:09:44 kefk kernel:   0: [f7ab2040] link (37ab2080) e0 Stalled 
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=36846be0)
Nov 23 00:09:44 kefk kernel:   1: [f7ab2080] link (37ab20c0) e3 SPD Active 
Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=36252980)
Nov 23 00:09:44 kefk kernel:   2: [f7ab20c0] link (00000001) e3 IOC Active 
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

After some tries with the same result, finally the device is detected and the 
behaviour is reported on previous mail.

HTH.

Just let me know if more tests or information are needed.
 
-- 
Fabio Coatti       http://members.ferrara.linux.it/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to