> That's what _enables_ PCI bus-mastering (DMA) by the device.
> 
> OHCI controllers do memory accesses all the time, as normal
> part of operation.  They have some registers that point to
> memory locations for the USB transaction schedule, and every
> millisecond they start scanning that schedule ... by reading
> EDs and, if the ED's queue is non-empty, TDs.  (UHCI and EHCI
> work in the same general way, but those chips use different
> data structures for their USB transaction schedules.)
> 
> Then using the data in the TD, they perform USB transactions
> and read/write the data buffers; and write back the updated
> TD (and eventually ED).
> 
> So DMA initialization is done as part of ED and TD setup,
> at least the chip-specific parts.
> 
> - Dave
> 

I can understand DMA buffer initlisation for EDs and TDs. But, in my
case I am working for OHCI connecting to ARM AHB bus with a seperate
general purpose DMA controller connecting to AHB as well. In the ohci
pci code, I can only see the code to initlise the DMA buffer, but dont
know how to actually enable/perform DMA. So I have no idea how to
modify the code to make it work for my board. Can any one provide help
on this.

Thanks,
Li Xinyi


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to