Hi! > I don't have swsusp compiled in, but if I unload and > reload the module, then it works. > Anyway, this is not the intended behaviour, as it > worked fine till 2.6.10 without unload/reload.
Yes it is a bug. Find which changeset causes it and complain to its author. It is probably going to be some usb change. > > > With kernel 2.6.10, I have the following problem > > with uhci_hcd: > > > After an ACPI S3 suspend it fails to see any USB > > device plugged in. > > > If I unload the module and load it again, it works > > again. > > > I hadn't this problem with previous kernels, where > > it worked just fine. > > > Do you know something that changed between 2.6.9 > > and 2.6.10 that could > > > lead to this behavior ? > > > It is ACPI or USB fault ? > > > > Does it work after swsusp? Can you try unloading > > module before suspend > > and reloading it after resume? > > -- 64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
